INCONEL ALLOY 625

Alloy Digest ◽  
1967 ◽  
Vol 16 (2) ◽  
Keyword(s):  
Base Alloy ◽  
Stress Rupture ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625 ◽  
Good Oxidation Resistance ◽  
Aerospace Applications ◽  
Stress Rupture Properties ◽  
Nickel Base ◽  
Engine Components

Abstract INCONEL alloy 625 is a nickel-base alloy having excellent stress-rupture properties and good oxidation resistance to 1200 F. It is recommended for jet engine components, aerospace applications and chemical processing equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-121. Producer or source: Huntington Alloy Products Division, An INCO Company.

PYROMET 751

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Base Alloy ◽  
Stress Rupture ◽  
Heat Treating ◽  
Chemical Corrosion ◽  
Stress Rupture Properties ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Base ◽  
Rupture Properties ◽  
Corrosion And Oxidation

Abstract PYROMET 751 is an age-hardenable nickel-base alloy with good stress-rupture properties to 1600 F. Its creep rate is low under high stresses at 1200-1500 F. It is highly resistant to chemical corrosion and oxidation. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-335. Producer or source: Carpenter Technology Corporation.

PYROMET X-751

Alloy Digest ◽  
1973 ◽  
Vol 22 (5) ◽  
Keyword(s):  
Base Alloy ◽  
Stress Rupture ◽  
Heat Treating ◽  
Chemical Corrosion ◽  
Stress Rupture Properties ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Nickel Base ◽  
Rupture Properties ◽  
Corrosion And Oxidation

Abstract PYROMET X-751 is an age hardenable nickel-base alloy with good stress-rupture properties at 1600 F. It is highly resistant to chemical corrosion and oxidation. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-190. Producer or source: Carpenter Technology Corporation.

INCONEL ALLOY 722

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Nickel Base Alloy ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract INCONEL Alloy 722, formerly Inconel W alloy, is a high strength, high-temperature nickel-base alloy responding to age hardening heat treatments for maximum properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-100. Producer or source: Huntington Alloy Products Division, An INCO Company.

FANSTEEL 42

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Base Alloy ◽  
Stress Rupture ◽  
Heat Treating ◽  
Recrystallization Temperature ◽  
Stress Rupture Properties ◽  
Rupture Properties

Abstract FANSTEEL 42 Metal is a molybdenum-base alloy recommended for high temperature applications. It has high recrystallization temperature and good stress-rupture properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Mo-6. Producer or source: Fansteel Metallurgical Corporation.

AISI No. 664

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
High Temperature ◽  
Stress Rupture ◽  
Heat Treating ◽  
Good Combination ◽  
Creep And Stress Rupture ◽  
High Temperature Alloy ◽  
Vacuum Melting ◽  
Stress Rupture Properties ◽  
Nickel Base ◽  
Rupture Properties

Abstract AISI No. 664 is a nickel-base high-temperature alloy that can be precipitation hardened because of its contents of aluminum and titanium. Vacuum melting is used in its production to provide excellent quality and reproducability. It is used for applications requiring a good combination of creep and stress-rupture properties up to about 1500 F. Typical applications are gas-turbine components, airframes and fasteners. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-269. Producer or source: Nickel alloy producers.

INCONEL ALLOY 604

Alloy Digest ◽  
1962 ◽  
Vol 11 (3) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Rupture Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Inconel Alloy ◽  
Nickel Base ◽  
Short Time

Abstract INCONEL Alloy 604, nickel-base alloy, has better high temperature properties than Inconel Alloy, particularly where rupture strength, creep, and short-time tensile strength are necessary. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-70. Producer or source: Huntington Alloy Products Division, An INCO Company.

INCONEL 600

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Rupture Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Inconel Alloy ◽  
Inconel 600 ◽  
Nickel Base ◽  
Short Time

Abstract INCONEL 600 nickel-base alloy has better high temperature properties than Inconel alloy, particularly where rupture strength, creep and short-time tensile are necessary. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-56. Producer or source: Huntington Alloy Products Division, An INCO Company.

UNITEMP 625

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
High Temperature ◽  
High Performance ◽  
Stress Rupture ◽  
Heat Treating ◽  
Aqueous Corrosion ◽  
Stress Rupture Properties ◽  
Resistance To Stress ◽  
Nickel Base ◽  
Gaseous Corrosion ◽  
Rupture Properties

Abstract UNITEMP 625 is a nickel-base, austenitic, solution-strengthened high-performance alloy that provides excellent resistance to both high-temperature gaseous corrosion and aqueous corrosion coupled with good strength and stress-rupture properties to 1800 F. The alloy has good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-344. Producer or source: Cyclops Corporation.

INCONEL FILLER METAL 601

Alloy Digest ◽  
1986 ◽  
Vol 35 (3) ◽  
Keyword(s):  
Arc Welding ◽  
Filler Metal ◽  
Base Alloy ◽  
Heat Treating ◽  
Gas Tungsten Arc Welding ◽  
Inconel Alloy ◽  
Gas Tungsten Arc ◽  
Gas Tungsten ◽  
Nickel Base ◽  
Corrosion And Oxidation

Abstract INCONEL Filler Metal 601 is a nickel-base alloy that is used for gas-tungsten-arc welding of INCONEL alloy 601. It is the preferred welding product for all gas-tungsten-arc welding of alloy 601. This weld metal is comparable to the base metal (INCONEL alloy 601) in resistance to corrosion and oxidation. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-329. Producer or source: Inco Alloys International Inc..

ALLOY 713LC

Alloy Digest ◽  
1966 ◽  
Vol 15 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Rupture Strength ◽  
Base Alloy ◽  
High Stress ◽  
Stress Rupture ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract ALLOY 713LC is a nickel-base alloy possessing high stress-rupture strength up to 1700 F combined with excellent resistance to thermal fatigue. It is recommended for turbine wheels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-118. Producer or source: Austenal Microcast Division, Howmet Corporation.

Sign in / Sign up

Export Citation Format

Share Document