NIMAG 101

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Low Carbon ◽  
Vacuum Melting ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Wide Range ◽  
High Degree

Abstract NIMAG 101 combines good mechanical properties with good corrosion resistance. It retains its strength to a high degree at elevated temperatures. Close control of composition is achieved by vacuum melting. This material has a wide range of electrical and electronic applications. Nimag 101 is a low-carbon version of Nimag 100. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-234. Producer or source: Spang Industries Inc..

NIMAG 100

Alloy Digest ◽  
1976 ◽  
Vol 25 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Vacuum Melting ◽  
Good Corrosion Resistance ◽  
Wide Range ◽  
High Degree

Abstract NIMAG 100 is wrought nickel combining excellent mechanical properties with good corrosion resistance. It retains its strength to a high degree at elevated temperatures. Nimag 100 is produced by vacuum melting to provide close control of composition. It is used in a wide range of electrical and electronic applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-224. Producer or source: Spang Industries Inc..

BRUSH ALLOY 3

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Corrosion Resistance

Abstract BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

IN-102

Alloy Digest ◽  
1969 ◽  
Vol 18 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
International Nickel Company ◽  
Nickel Chromium ◽  
Temperature Performance ◽  
High Degree

Abstract IN-102 is a nickel-chromium-iron alloy designed for long service at temperatures up to 1300 F. It combines high strength and high ductility at the elevated temperatures with a high degree of structural stability. It is used for aerospace, power and steam turbine components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-147. Producer or source: International Nickel Company Inc..

ALLEGHENY STAINLESS TYPE 434

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Continuous Service ◽  
Oxidation Resistant ◽  
Corrosive Environments

Abstract ALLEGHENY STAINLESS TYPE 434 is a low-carbon ferritic stainless steel with good corrosion resistance to mildly corrosive environments and the atmosphere. It is oxidation resistant at temperatures up to 1600 F for intermittent service and up to 1450-1500 F for continuous service. It is used for automotive trim and other exterior environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-292. Producer or source: Allegheny Ludlum Corporation.

AK STEEL TYPE 304L

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Stress Relief ◽  
Carbide Precipitation ◽  
Low Carbon ◽  
Steel Type ◽  
Temperature Performance ◽  
Type 304

Abstract AK Steel Type 304L is a chromium-nickel austenitic stainless steel. It is an extra low-carbon variation of Type 304 with a 0.030% maximum carbon content that eliminates carbide precipitation due to welding. As a result, this alloy can be used in the “as-welded” condition, even in severe corrosive conditions. In many cases it eliminates the necessity of annealing weldments except for applications specifying stress relief. Type 304L has slightly lower mechanical properties than Type 304. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance, corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1324. Producer or Source: AK Steel Corporation.

RAFFMETAL EN AB-Al Si7Mg0.3 (EN AB-42100)

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Magnesium Content ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Corrosion Resistance ◽  
Wide Range

Abstract Raffmetal EN AB-Al Si7Mg0.3 (EN AB-42100) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This alloy can be produced to a wide range of mechanical properties by making small adjustments to the magnesium content and/or heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-480. Producer or source: Raffmetal S.p.A.

PANDEX VAC ARC

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PANDEX VAC ARC is a precipitation hardening, austenitic, heat resisting alloy designed for service at elevated temperatures where high strength and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-115. Producer or source: Latrobe Steel.

CRUCIBLE XM 19 STAINLESS

Alloy Digest ◽  
1982 ◽  
Vol 31 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Stainless Steels ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Aisi Type ◽  
Cold Worked

Abstract CRUCIBLE XM 19 Stainless is a nitrogen-strengthened, low-carbon austenitic stainless steel that provides good corrosion resistance in combination with high strength. The alloy has better corrosion resistance than AISI Type 316 with approximately twice the yield strength. It can be welded, machined and cold worked using the same equipment and methods used for the conventional AISI 300 series stainless steels. It is nonmagnetic as annealed and after severe cold work. Its many uses include cables, fasteners, pumps, valves, marine hardware and springs. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-414. Producer or source: Crucible Specialty Metals Division, Colt Industries.

ARMCO PH 15-7Mo STAINLESS STEEL

Alloy Digest ◽  
1997 ◽  
Vol 46 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Minimal Distortion

Abstract Armco PH 15-7 Mo stainless steel is a Cr-Ni-Mo-Al semi-austenitic stainless steel. It is heat treatable to high strength and hardness, maintains good corrosion resistance, and undergoes minimal distortion from heat treatment. The alloy has applications in the aerospace and other industries where high strength at elevated temperatures is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-693. Producer or source: Armco Inc., Specialty Steels Division.

Sign in / Sign up

Export Citation Format

Share Document