IN-519

Alloy Digest ◽  
1970 ◽  
Vol 19 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stress Rupture ◽  
Heat Treating ◽  
Centrifugally Cast ◽  
Temperature Performance ◽  
Stress Rupture Properties ◽  
Rupture Properties

Abstract IN-519 was developed primarily for application as centrifugally cast tubes in steam-hydrocarbon reformer furnaces. It has significantly higher stress-rupture properties than HK-40 (25Cr-20Ni), which is most commonly used for such components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-246. Producer or source: Abex Corporation, Engineered Products Division.

CDA 710

Alloy Digest ◽  
1970 ◽  
Vol 19 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Resistance ◽  
Stress Rupture ◽  
Heat Treating ◽  
Temperature Performance ◽  
Seawater Corrosion ◽  
Stress Rupture Properties ◽  
Rupture Properties

Abstract CDA 710 is a cupro-nickel alloy having high resistance to seawater corrosion and good stress-rupture properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-215. Producer or source: Anaconda American Brass Company.

PYROMET 718

Alloy Digest ◽  
1973 ◽  
Vol 22 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Rupture ◽  
Heat Treating ◽  
Temperature Performance ◽  
Stress Rupture Properties ◽  
Technology Corporation ◽  
Carpenter Technology Corporation ◽  
Rupture Properties

Abstract PYROMET 718 is an alloy designed to display exceptionally high yeild, tensile and stress-rupture properties at temperatures up to 1300 F. (704 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-193. Producer or source: Carpenter Technology Corporation.

FANSTEEL 42

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Base Alloy ◽  
Stress Rupture ◽  
Heat Treating ◽  
Recrystallization Temperature ◽  
Stress Rupture Properties ◽  
Rupture Properties

Abstract FANSTEEL 42 Metal is a molybdenum-base alloy recommended for high temperature applications. It has high recrystallization temperature and good stress-rupture properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Mo-6. Producer or source: Fansteel Metallurgical Corporation.

ELECTRALLOY ALLOY ECHX

Alloy Digest ◽  
2010 ◽  
Vol 59 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
High Performance ◽  
Stress Rupture ◽  
Heat Treating ◽  
Stress Rupture Properties ◽  
Nickel Base ◽  
Gaseous Corrosion ◽  
Rupture Properties

Abstract Electralloy ECHX is a solution-strengthened, nickel-base, high-performance alloy providing excellent resistance to high-temperature gaseous corrosion, coupled with good strength and stress rupture properties up to 1205 deg C (2200 deg F). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-678. Producer or source: Electralloy, a Division of G.O. Carlson Inc.

OREMET HPC 85W-15 Mo

Alloy Digest ◽  
1965 ◽  
Vol 14 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Tungsten Alloy ◽  
Centrifugally Cast ◽  
Cast Refractory ◽  
Temperature Performance

Abstract OREMET HPC 85W-15Mo is a vacuum consumable electrode melted and centrifugally cast refractory tungsten alloy having 100% density. It is recommended where strength and/or corrosion resistance at high temperatures are required. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: W-9. Producer or source: Oregon Metallurgical Corporation.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

SILNIC BRONZE

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Silicon

Abstract SILNIC BRONZE is a copper-nickel-silicon alloy having high strength, high conductivity and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-90. Producer or source: Chase Brass & Copper Company Inc..

ALUMINUM 1100

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Aluminum ◽  
Heat Treating ◽  
Industrial Applications ◽  
Temperature Performance ◽  
Commercially Pure

Abstract ALUMINUM 1100 is commercially pure aluminum and is characterized by its excellent ability to be drawn, spun, stamped or forged. It has good weldability, excellent resistance to corrosion and many home, architectural and industrial applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-44. Producer or source: Various aluminum companies. Originally published October 1956, revised February 1974.

Sign in / Sign up

Export Citation Format

Share Document