SANDVIK SANICRO 28

Alloy Digest ◽  
1984 ◽  
Vol 33 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Steel Alloy ◽  
Low Carbon ◽  
Gas Wells ◽  
Temperature Performance ◽  
Sanicro 28 ◽  
Corrosive Environments ◽  
Sour Gas

Abstract SANDVIK Sanicro 28 is an all-purpose low-carbon stainless steel alloy for service in highly corrosive environments. It has exceptionally high resistance to various types of corrosive attack and has good weldability. Among its numerous applications are evaporator tubes in the production of phosphoric acid; down-hole tubulars in deep, sour gas wells; piping and heat-exchanger tubes in sulfuric acid service and seawater cooled heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-442. Producer or source: Sandvik. See also Alloy Digest SS-831, September 2001.

NICROFER 3127 LC

Alloy Digest ◽  
1984 ◽  
Vol 33 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Heat Treating ◽  
General Corrosion ◽  
Low Carbon ◽  
Gas Wells ◽  
Good Resistance ◽  
Temperature Performance ◽  
Sour Gas

Abstract NICROFER 3127 LC is a fully austenitic extra-low-carbon stainless steel to which has been added approximately 3% molybdenum and 1% copper. It is characterized by (1) Good resistance to general corrosion, (2) Excellent resistance to pitting, crevice and intergranular corrosion and to stress-corrosion cracking, and (3) Good mechanical properties. Its many uses include equipment for producing phosphoric acid by the wet method, equipment for handling sulfuric acid contaminated with chlorides, handling seawater and use in deep sour gas wells. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-446. Producer or source: Vereingte Deutsche Metallwerke AG.

ALLEGHENY STAINLESS TYPE 434

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Continuous Service ◽  
Oxidation Resistant ◽  
Corrosive Environments

Abstract ALLEGHENY STAINLESS TYPE 434 is a low-carbon ferritic stainless steel with good corrosion resistance to mildly corrosive environments and the atmosphere. It is oxidation resistant at temperatures up to 1600 F for intermittent service and up to 1450-1500 F for continuous service. It is used for automotive trim and other exterior environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-292. Producer or source: Allegheny Ludlum Corporation.

OUTOKUMPU MODA 410S/4000

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract Outokumpu Moda 410S/4000 is a 13% Cr, ferritic stainless steel that is used in applications requiring good resistance to mildly corrosive environments. It is a low carbon, non-hardening modification of Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1329. Producer or source: Outokumpu Oyj.

MONIT

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Stainless Steels ◽  
Heat Exchangers ◽  
Crevice Corrosion ◽  
Ferritic Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Carbon And Nitrogen ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract MONIT is a titanium-stabilized ferritic steel with extra low carbon and nitrogen. It was developed specifically for demanding corrosive environments. It shows very good resistance to pitting and crevice corrosion in seawater and in this respect it is superior to most other stainless steels. MONIT has good strength, toughness, and weldability; it also tough at sub-zero temperatures after welding. Its uses include scrubbers, condensers and heat exchangers in plants that use seawater or other chloride-containing solutions This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-417. Producer or source: Uddeholm Aktiebolag.

CRONIFER 2205 LCN

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Exchangers ◽  
Operating Temperature ◽  
Heat Treating ◽  
Chemical Equipment ◽  
Chloride Ions ◽  
Low Carbon ◽  
Duplex Structure ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract CRONIFER 2205 LCN is a low-carbon nitrogen-alloyed stainless steel with a ferritic-austenitic duplex structure. It has excellent resistance to stress-corrosion cracking in solutions containing chloride ions. Its resistance to pitting corrosion is good; both base metal and welded material successfully resist intergranual corrosion of the type that shows up in the Strauss test. For longtime use, the operating temperature should not exceed 300 C (572 F). The uses of CRONIFER 2205 LCN include chemical equipment and heat exchangers using seawater and/or brackish water. This datasheet provides information on composition and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-415. Producer or source: Vereingte Deutsche Metallwerke AG.

NIROSTA 4429

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
High Nitrogen ◽  
Temperature Performance ◽  
Pitting Corrosion Resistance

Abstract Nirosta 4429 is a low-carbon, high-nitrogen version of type 316 stainless steel. The low carbon imparts intergranular corrosion resistance while the nitrogen imparts both higher strength and some increased pitting corrosion resistance. It is recommended for use as welded parts that need not or cannot be annealed after welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-787. Producer or source: ThyssenKrupp Nirosta.

ALLEGHENY LUDLUM E-BRITE 26-1 ALLOY

Alloy Digest ◽  
1979 ◽  
Vol 28 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Refining Process ◽  
Low Carbon ◽  
Vacuum Refining ◽  
Temperature Performance ◽  
Corrosive Environments ◽  
Chloride Stress Corrosion Cracking ◽  
Low Nitrogen

Abstract ALLEGHENY LUDLUM E-BRITE 26-1 ALLOY is a low-carbon, low-nitrogen ferritic stainless steel made by a vacuum refining process. It provides: (1) Excellent resistance to pitting and crevice corrosion in chloride-containing environments, (2) Excellent resistance to chloride stress-corrosion cracking, (3) Resistance to intergranular corrosion, (4) Resistance to a wide variety of corrosive environments, and (5) Improved toughness and ductility after welding. Its applications include equipment for handling caustic, organic acids, nitric acid, bleach solutions, urea and chloride containing cooling waters. This datasheet provides information on composition, physical properties, microstructure, hardness, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-360. Producer or source: Allegheny Ludlum Corporation.

ARMCO 21-6-9

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Temperature Performance

Abstract Armco 21-6-9 is an austenitic stainless steel alloy designed for use in applications where a combination of high strength and corrosion resistance is desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-125. Producer or source: Armco Inc., Eastern Steel Division.

SANDVIK 2RE10

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
High Nickel

Abstract SANDVIK 2RE10 is a high-chromium, high-nickel, extra-low-carbon austenitic stainless steel with high resistance to oxidizing media such as concentrated nitric acid, high resistance to intergranular corrosion and good structural stability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-272. Producer or source: Sandvik. See also Alloy Digest SS-491, November 1987.

AISI TYPE 416 and 416Se

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type Stainless Steel

Abstract AISI Types 416 and 416Se are free-maching grades of the low-carbon chromium type stainless steel. The former contains sulfur while the latter contains selenium to produce the free-cutting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-162. Producer or source: Stainless steel mills.

Sign in / Sign up

Export Citation Format

Share Document