DURACORR 300

Alloy Digest ◽  
2004 ◽  
Vol 53 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Life Cycle ◽  
Life Cycle Cost ◽  
Low Cost

Abstract Duracorr 300 is low-cost, utilitarian 12% Cr stainless steel with more corrosion resistance and life-cycle cost advantages than weathering steels. The steel may be used where a combination of abrasion and corrosion resistance is required. The nominal hardness is 300 HB. This datasheet provides information on composition, microstructure, and hardness as well as fracture toughness. It also includes information on forming and joining. Filing Code: SS-912. Producer or source: ISG Plate.

DURACORR

Alloy Digest ◽  
1997 ◽  
Vol 46 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Life Cycle ◽  
Physical Properties ◽  
Tensile Properties ◽  
Life Cycle Cost ◽  
Low Cost ◽  
Bend Strength ◽  
Steel Company

Abstract Duracorr is low-cost, utilitarian 11% Cr stainless steel with more corrosion resistance and life-cycle cost advantages than weathering steels. The steel may be used where a combination of abrasion and corrosion resistance is required. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on corrosion resistance as well as joining. Filing Code: SS-680. Producer or source: Lukens Steel Company.

AISI 1030

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
General Purpose ◽  
Fine Grain ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1030 is a plain carbon steel containing nominally 0.30% carbon. It is used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered conditions for general-purpose engineering and construction. It provides medium strength and toughness at low cost. Among its many uses are axles, bolts, gears and building sections. All data are on a single heat of fine-grain steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-94. Producer or source: Carbon and alloy steel mills.

AISI 1040

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Low Cost ◽  
Heat Treating ◽  
General Purpose ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract AISI 1040 is a medium-carbon steel used in the hot-rolled, normalized, oil quenched and tempered or water quenched and tempered condition for general purpose engineering and construction. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-41. Producer or source: Carbon and alloy steel mills.

SANDVIK 5R75

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance

Abstract Sandvik 5R75 is a molybdenum-containing austenitic stainless steel with titanium added to prevent intergranular corrosion by tying up the carbon. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-777. Producer or source: Sandvik Steel Company. Originally published March 2000, corrected November 2000.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ARMCO 21-6-9

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Temperature Performance

Abstract Armco 21-6-9 is an austenitic stainless steel alloy designed for use in applications where a combination of high strength and corrosion resistance is desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-125. Producer or source: Armco Inc., Eastern Steel Division.

AISI TYPE 440B

Alloy Digest ◽  
1969 ◽  
Vol 18 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Chromium Steel ◽  
Ball Bearings ◽  
High Carbon ◽  
High Chromium ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type 440B is a hardenable high-carbon high-chromium steel recommended stainless for cutlery, valve parts, ball bearings, pivot pins, etc. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-223. Producer or source: Stainless steel mills.

ENDURO 19-9SMo

Alloy Digest ◽  
1968 ◽  
Vol 17 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Thermal Treatment ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract ENDURO 19-9-SMo is a 19-9 type stainless steel containing molybdenum to greatly increase its resistance to attack by most chemicals. It is nonmagnetic and does not respond to thermal treatment for hardening. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-207. Producer or source: Republic Steel Corporation.

AISI TYPE 442

Alloy Digest ◽  
1966 ◽  
Vol 15 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Chromium Steel ◽  
General Purpose ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Type 442 is a non-hardenable ferritic chromium steel recommended for general purpose corrosion and heat resisting applications. It is magnetic in all conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-187. Producer or source: Stainless steel mills.

ACI TYPE CF-12M

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance

Abstract Type CF-12M is a chromium-nickel-molybdenum alloy steel having corrosion resistance and good strength at moderately elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-167. Producer or source: Stainless steel foundries.

Sign in / Sign up

Export Citation Format

Share Document