THYRAPID PM4 HS

Alloy Digest ◽  
1995 ◽  
Vol 44 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Rapid Solidification ◽  
Solidification Process ◽  
Heat Treating ◽  
Alloyed Steel ◽  
Rapid Solidification Process ◽  
Bend Strength ◽  
High Carbon

Abstract THYRAPID PM4 HS is a high carbon, vanadium alloyed steel with an addition of sulfur (0.20-0.25%) to aid in the machining of large bars. The material is produced by the rapid solidification process to eliminate normal sulfide stringers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-538. Producer or source: Thyssen Specialty Steels Inc.

THYRAPID PT15 ESH*

Alloy Digest ◽  
1995 ◽  
Vol 44 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rapid Solidification ◽  
High Speed ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Bend Strength ◽  
High Carbon ◽  
Red Hardness

Abstract THYRAPID PT 15 ESH is a high-speed tool steel made by the rapid solidification of powder followed by Electro Slag Heating. The high carbon, vanadium and tungsten contents augment high wear resistance and good toughness while cobalt imparts good red hardness This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on heat treating and machining. Filing Code: TS-537. Producer or source: Thyssen Specialty Steels Inc.

SWISSMETAL SM275H (BOILLAT CN8)

Alloy Digest ◽  
2002 ◽  
Vol 51 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Automotive Industry ◽  
Heat Treating ◽  
Bend Strength ◽  
Good Workability

Abstract Swissmetal alloy SM275H is a hardenable Cu-Ni-Sn alloy with good workability and corrosion resistance. It is often used in the automotive industry for springs, contacts, and clips. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-687. Producer or source: Swissmetal Metalworks Ltd, Plant Boillat.

ALLEGHENY LUDLUM STAINLESS TYPE 440A

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Hardness ◽  
Heat Treating ◽  
Chromium Steel ◽  
High Carbon

Abstract ALLEGHENY LUDLUM STAINLESS TYPE 440A is a hardenable high-carbon chromium steel designed to provide stainless properties with high hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-38. Producer or source: Allegheny Ludlum Corporation.

THYRAPID PM4 ESH

Alloy Digest ◽  
1995 ◽  
Vol 44 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Rapid Solidification ◽  
Cold Work ◽  
Heat Treating ◽  
Bend Strength

Abstract THYRAPID PM4 ESH is manufactured by the rapid solidification of powder and augmented by Electro Slag Heating. Good wear resistance and toughness lead to cold work punch and die applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-539. Producer or source: Thyssen Specialty Steels Inc.

ALCOLOY ALLOY 688

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Brass Alloy ◽  
Temperature Performance

Abstract ALCOLOY ALLOY 688 is a high-strength cobalt-aluminum modified brass alloy with good drawability and formability. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fatigue. It also includes information on low temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-219. Producer or source: Olin Brass.

LO-AIR

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Duty ◽  
High Carbon

Abstract Lo-Air is a high-carbon alloy steel having air hardening characteristics. It is a deep hardening steel producing a combination of high strength, toughness and wear resistance. It is recommended for precision tools and heavy duty blanking and forming dies. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-154. Producer or source: Cyclops Corporation.

DOGAL H LAD

Alloy Digest ◽  
2011 ◽  
Vol 60 (1) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Bend Strength ◽  
Cold Forming

Abstract Dogal H LAD grades are microalloy steels suitable for cold forming. This datasheet provides information on composition, physical properties, tensile properties, and bend strength. It also includes information on forming, heat treating, joining, and surface treatment. Filing Code: CS-161. Producer or source: SSAB Swedish Steel Inc..

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

SAE 1055

Alloy Digest ◽  
1988 ◽  
Vol 37 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Carbon ◽  
Hand Tools ◽  
Heavy Machinery ◽  
Steel Mills

Abstract SAE 1055 is a high-carbon oil or water-hardening tool and machinery steel recommended for hand tools, agricultural tools and machinery, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: CS-117. Producer or source: Carbon steel mills.

AISI TYPE A2

Alloy Digest ◽  
1965 ◽  
Vol 14 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Die Steel ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type-A2 is a high-carbon, chromium, molybdenum tool and die steel having excellent non-deforming properties, abrasion resistance, toughness and good machinability. It is used for blanking and forming dies, rolls, punches, gauges, broaches, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: TS-168. Producer or source: Tool steel mills.

Sign in / Sign up

Export Citation Format

Share Document