DEUTSCHE EDELSTAHLWERKE CRYODUR 2002

Alloy Digest ◽  
2021 ◽  
Vol 70 (2) ◽  
Keyword(s):  
Cold Work ◽  
Heat Treating ◽  
Rapid Quenching ◽  
Tool Steels ◽  
Alloying Element ◽  
High Carbon ◽  
Martensitic Microstructure ◽  
And Performance ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2002 is a high-carbon, alloy cold-work tool steel in which the principal alloying element is chromium. It is among the least expensive of the tool steels and requires strict control of processing and heat treatment to achieve good properties and performance. The low alloy content of this steel yields few alloy carbides and, therefore, lower wear resistance compared to the more highly alloyed tool steels. The hardenability of Cryodur 2002 is low, and rapid quenching is required to produce a martensitic microstructure. Despite rapid quenching, this steel may harden only to shallow depths. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-809. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2235

Alloy Digest ◽  
2021 ◽  
Vol 70 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cutting Edge ◽  
High Carbon ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2235 is a high-carbon, Cr-V, alloy cold-work tool steel that has medium hardenability and is suitable for short-run tooling requiring a combination of good wear resistance and toughness, and a keen cutting edge. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-811. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2210

Alloy Digest ◽  
2020 ◽  
Vol 69 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
High Carbon ◽  
High Toughness ◽  
Temperature Performance ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Deutsche Edelstahlwerke Cryodur 2210, also known as silver steel, is a high-carbon, Cr-V, alloy cold-work tool steel that is primarily used for short-run tooling requiring low-to-medium wear resistance and very high toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-806. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2243

Alloy Digest ◽  
2021 ◽  
Vol 70 (12) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Vanadium Alloy ◽  
High Carbon ◽  
High Toughness ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2243 is a high-carbon, chromium-silicon-vanadium alloy cold-work tool steel that is suitable for applications requiring a combination of high strength, high toughness, and good wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on casting and heat treating. Filing Code: TS-821. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH & Co.

INDUSTEEL TENASTEEL

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Vanadium Alloy ◽  
Tool Steels ◽  
High Carbon ◽  
Cold Work Tool Steel

Abstract Industeel Tenasteel is a high-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is specially designed to replace Type D2 and X153CrMoV12 (1.2379) cold work tool steels in applications requiring high wear resistance and very good toughness. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-795. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

DEUTSCHE EDELSTAHLWERKE CRYODUR 2101

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Chromium Alloy ◽  
High Carbon ◽  
Specialty Steel ◽  
Cold Work Tool Steel ◽  
Manganese Chromium

Abstract Deutsche Edelstahlwerke Cryodur 2101 is a high-carbon, silicon-manganese-chromium, alloy cold-work tool steel that possesses good wear resistance and excellent toughness, and is primarily used for shock resisting applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-798. Producer or Source: Deutsche Edelstahlwerke Specialty Steel.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2080

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
High Carbon ◽  
High Chromium ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2080 is a high-carbon (2%), high-chromium (12%), alloy cold-work tool steel that is suitable for medium run tooling in applications where a very good abrasive wear resistance is needed but where demands on chipping resistance are small. This datasheet provides information on composition, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-792. Producer or source: Deutsche Edelstahlwerke Specialty Steel GmbH.

UNS T30407

Alloy Digest ◽  
1985 ◽  
Vol 34 (4) ◽  
Keyword(s):  
Tool Steel ◽  
Vanadium Carbide ◽  
Cold Work ◽  
Heat Treating ◽  
Cold Extrusion ◽  
High Carbon ◽  
Extrusion Dies ◽  
Steel Mills ◽  
Aisi Type ◽  
Cold Work Tool Steel

Abstract UNS No. T30407 is a high-carbon chromium cold-work tool steel containing vanadium (4.0%) and molybdenum (1.0%). Its carbon and vanadium form a vanadium carbide that provides war resistance many times greater than that of UNS No. T30403 (AISI Type D3). UNS No. T30407 was developed for applications where extreme abrasive wear is needed. Its many applications include briquetting dies and punches, brick mold liners, pottery, tools, broaches, meat-chopper plates and cold-extrusion dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-439. Producer or source: Tool steel mills.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2067

Alloy Digest ◽  
2020 ◽  
Vol 69 (2) ◽  
Keyword(s):  
Cold Work ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Dimensional Changes ◽  
Short Run ◽  
Quench Hardening ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2067 is a high-carbon, 1.5% chromium, alloy cold-work tool steel. In view of its higher hardenability than that of the non-alloy, water-hardening, cold work tool steels, this steel can be oil quenched, a factor that minimizes dimensional changes during quench hardening. Cryodur 2067 is suitable for short run tooling in applications requiring high surface hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-786. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

BÖHLER K107

Alloy Digest ◽  
2020 ◽  
Vol 69 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Abrasive Wear ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Tungsten Alloy ◽  
High Carbon ◽  
Cold Work Tool Steel ◽  
Very High

Abstract Böhler K107 is a high-carbon (2.1%), 12% chromium. 0.7 % tungsten, alloy cold-work tool steel that is used in applications where a very high abrasive wear resistance is needed, but where demands on chipping resistance are small. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-799. Producer or source: voestalpine Böhler Edelstahl GmbH&Co KG.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2242

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Vanadium Alloy ◽  
Medium Carbon ◽  
High Toughness ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2242 is a medium-carbon, chromium-vanadium alloy cold-work tool steel that has medium hardenability and is suitable for applications requiring a combination of high strength, high toughness, and good wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-816. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

Sign in / Sign up

Export Citation Format

Share Document