Discrete and Continuous Deflection Testing of Runways at Hartsfield Atlanta International Airport, Georgia

2003 ◽  
Vol 1860 (1) ◽  
pp. 76-89 ◽  
Author(s):  
Dennis J. Turner ◽  
Jeffrey L.-J. Lee ◽  
Kenneth H. Stokoe ◽  
Richard L. Boudreau ◽  
Quintin B. Watkins ◽  
...  
Keyword(s):  
Load Transfer ◽  
Concrete Pavements ◽  
Falling Weight Deflectometer ◽  
Remaining Life ◽  
Testing Program ◽  
Heavy Weight ◽  
Relative Stiffness ◽  
International Airport ◽  
Longitudinal Joints ◽  
Falling Weight

The measurement of deflection characteristics is a key feature in the evaluation of pavements. Deflections are used to evaluate pavement moduli, relative stiffness, load transfer, and, when used periodically, a rate of deterioration and remaining life. The comprehensive deflection testing program conducted on Runways 9L/27R and 8R/26L, both jointed concrete pavements, at the Hartsfield Atlanta International Airport is described. A heavy-weight deflectometer was used to measure deflections at discrete locations on slab interiors, transverse joints, longitudinal joints, and slab corners. A rolling dynamic deflectometer was used to measure continuous deflection profiles along three longitudinal lines on both runways. Before fall 2001, all pavement deflection testing was performed using a falling-weight deflectometer. Comparisons of the equipment, loading mechanisms, and measured deflections are presented.

Effect of Concrete Mix Consolidation on Joint Faulting and Load Transfer Efficiency

1996 ◽  
Vol 1544 (1) ◽  
pp. 3-8
Author(s):  
Mustaque Hossain ◽  
John B. Wojakowski
Keyword(s):  
Load Transfer ◽  
Plain Concrete ◽  
Concrete Pavement ◽  
Transfer Efficiency ◽  
Unit Weight ◽  
Concrete Pavements ◽  
Falling Weight Deflectometer ◽  
Rate Of Increase ◽  
Load Transfer Efficiency ◽  
Falling Weight

Six jointed reinforced concrete pavement and one jointed plain concrete pavement test sections on US-69 in Miami County, Kansas, constructed in 1979 have been surveyed annually for faulting for the past 9 years. Falling weight deflectometer tests were conducted in 1995 to assess the load transfer efficiency of the joints. The results show that, in general, as the original concrete density increases due to improved consolidation, the rate of increase of the joint fault depth decreases at doweled joints at a given pavement age. The occurrence of joint faulting is much more severe when load transfer devices are not present; this was observed even for the pavement section built on a nonerodible subbase. Improved consolidation sometimes appeared to help improve load transfer, resulting in a lower rate of faulting. Thus, the mandatory density requirement of 98 percent rodded unit weight, which has been in effect since 1980, has undoubtedly led to better joint performance for concrete pavements in Kansas.

Issues in simulating falling weight deflectometer test on concrete pavements

2015 ◽  
Vol 20 (2) ◽  
pp. 702-708 ◽  
Author(s):  
Chen-Ming Kuo ◽  
Chih-Chiang Lin ◽  
Cheng-Hao Huang ◽  
Yi-Cheng Lai
Keyword(s):  
Concrete Pavements ◽  
Falling Weight Deflectometer ◽  
Falling Weight

Relating Field Energy Attenuation in Portland Cement Concrete Pavements to Fracture Mechanics

2021 ◽  
Author(s):  
Carl Lenngren ◽  
Maria Hernandez
Keyword(s):  
Fracture Mechanics ◽  
Field Data ◽  
Rolling Resistance ◽  
Dissipated Energy ◽  
Concrete Pavements ◽  
Falling Weight Deflectometer ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Design Life ◽  
Falling Weight

Asset management of infrastructure is fundamental for maintenance planning and preservation of common property. A robust testing program is needed to assess the present-day status and for proper actions in time to minimize the ongoing depreciation of value. As a matter of fact, Portland Cement Concrete pavements show very little deterioration even after many years in service. Thus, it may be difficult to accurately predict the present asset value, other than using linear relations to the presumed design life. The primary reason for failure is cracking in concrete pavements, so assessing the dissipated energy from the load-deformation relation from a given load could be utilized for the purpose. The dissipated energy, i.e. the work data can be assessed by a falling weight deflectometer test, mimicking the passing of a truck or aircraft wheel load. In the present study, dynamic field data are evaluated, and the input data needed for the fracture mechanics model are used to predict the pavement life regarding cracking. To predict fracture energy and assess rolling resistance as well in concrete pavements, we need to consider the energy balance of the pavement system. To assess dissipated energy, falling weight deflectometer time histories are used to evaluate the pavement contribution to rolling resistance. Such analyses include all layers in the structure including the subgrade, so in the present case a way of sorting the dissipation at various depths is investigated. Field data were collected from a site, at mid-life of the predicted design life. The failure was confirmed several years later, and the remaining life was compared with the assumption that the dissipated energy near the edge was enough to initiate the cracks within the actual time to failure. Conversely, the dissipation at the mid-slab position was below the limit. The data from the field test were also used as an input for a finite element model to see if it was viable to further improve the prediction. The method seems to be promising, but more data are needed as the present set only represents the mid-life status.

scholarly journals Experimental continuously reinforced concrete pavement parameterization using nondestructive methods

2016 ◽  
Vol 9 (2) ◽  
pp. 263-274
Author(s):  
L. S. Salles ◽  
J. T. Balbo
Keyword(s):  
Reinforced Concrete ◽  
Load Transfer ◽  
Structural Condition ◽  
Concrete Pavement ◽  
Pavement Performance ◽  
Falling Weight Deflectometer ◽  
Matching Process ◽  
Load Transfer Efficiency ◽  
Falling Weight ◽  
The University

ABSTRACT Four continuously reinforced concrete pavement (CRCP) sections were built at the University of São Paulo campus in order to analyze the pavement performance in a tropical environment. The sections short length coupled with particular project aspects made the experimental CRCP cracking be different from the traditional CRCP one. After three years of construction, a series of nondestructive testing were performed - Falling Weight Deflectometer (FWD) loadings - to verify and to parameterize the pavement structural condition based on two main properties: the elasticity modulus of concrete (E) and the modulus of subgrade reaction (k). These properties estimation was obtained through the matching process between real and EverFE simulated basins with the load at the slab center, between two consecutive cracks. The backcalculation results show that the lack of anchorage at the sections end decreases the E and k values and that the longitudinal reinforcement percentage provides additional stiffness to the pavement. Additionally, FWD loadings tangential to the cracks allowed the load transfer efficiency (LTE) estimation determination across cracks. The LTE resulted in values above 90 % for all cracks.

Prediction of Remaining Life of Asphalt Pavement with Falling-Weight Deflectometer Multiload-Level Deflections

2003 ◽  
Vol 1860 (1) ◽  
pp. 48-56 ◽  
Author(s):  
Hee Mun Park ◽  
Y. Richard Kim
Keyword(s):  
Flexible Pavements ◽  
Fatigue Cracking ◽  
Pavement Performance ◽  
Falling Weight Deflectometer ◽  
Remaining Life ◽  
Performance Models ◽  
Response Models ◽  
Wide Range ◽  
Pavement Response ◽  
Falling Weight

The development of prediction methods for the remaining life of flexible pavements using falling-weight deflectometer (FWD) multiload-level deflections is presented. Pavement response models and pavement performance models were used in developing this procedure. The pavement response models were designed to predict critical pavement responses from surface deflections and deflection basin parameters. The pavement performance models were used to develop the relationships between critical pavement responses obtained from pavement response models and actual pavement performance. Pavement distress data and FWD multiload-level deflection data obtained from the Long-Term Pavement Performance database were used to verify the performance prediction procedure. It was found that the performance of fatigue cracking can be predicted using the proposed procedure except for pavements with high and rapidly increasing cracking in wet-freeze regions. Such trends may be due to environment-induced distresses such as low-temperature cracking, permanent deformation of unbound layers, or both, during the spring thaw period. Predicted rut depths using both single-load and multiload-level deflections show good agreement with measured rut depths over a wide range of rutting potentials. However, the procedure using single–load-level deflections consistently underpredicts the rut depths. This observation demonstrates that the rutting prediction procedure using multiload-level deflections can estimate an excessive level of rutting quite well and thus improve the prediction quality of rutting potential in flexible pavements.

scholarly journals Evaluation of Load transfer in rigid pavements by Rolling wheel deflectometer and Falling weight deflectometer

2020 ◽  
Vol 45 ◽  
pp. 376-383
Author(s):  
Pawan Deep ◽  
Mathias B. Andersen ◽  
Søren Rasmussen ◽  
Nick Thom ◽  
Alessandro Marradi ◽  
...  
Keyword(s):  
Load Transfer ◽  
Falling Weight Deflectometer ◽  
Rigid Pavements ◽  
Rolling Wheel ◽  
Falling Weight

Structural Characterization of Fractured Portland Cement Concrete Pavements in Pennsylvania from Falling Weight Deflectometer Data

2020 ◽  
Vol 2674 (10) ◽  
pp. 781-793
Author(s):  
Luis Ramirez ◽  
Dennis Morian
Keyword(s):  
Portland Cement ◽  
Design Methods ◽  
Concrete Pavements ◽  
Falling Weight Deflectometer ◽  
Portland Cement Concrete ◽  
Cement Concrete ◽  
Structural Capacity ◽  
Fracturing Process ◽  
Overlay Design ◽  
Falling Weight

Hot mix asphalt (HMA) overlays on fractured Portland cement concrete (PCC) is a common rehabilitation alternative used for PCC pavements in Pennsylvania. Several fracture techniques including rubblization, crack and seat (C&S), and break and seat (B&S) have been used for decades to minimize reflective cracking by reducing the effective slab length and, with it, expansion/contraction movement. The design of this type of overlay requires knowledge of the structural capacity of the fractured PCC layer. The AASHTO 93 and Pavement ME design methods are used by the Pennsylvania Department of Transportation (DOT). These methods and the Pennsylvania DOT documentation recommend certain values to characterize the structural capacity of the fractured PCC. However, the guidance envisaged the selection of these values provided by these design methods and the Pennsylvania DOT documentation is limited. The objective of this study is to determine realistic Pennsylvania-specific elastic modulus (EPCC) values and layer coefficients (LC) to characterize the in situ behavior of fractured PCC layer for jointed reinforced concrete pavements (JRCP) and jointed plain concrete pavements (JPCP). To obtain these structural properties, 11 different rehabilitation projects located in Pennsylvania were analyzed using falling weight deflectometer (FWD) data, backcalculation programs, and statistical methods. Based on this analysis, the recommended values of EPCC and LC for C&S overlay design are 360 ksi (kips per square inch) and 0.32, respectively. In the case of B&S overlay design, these values correspond to 400 ksi and 0.34, respectively. The variability of the slab fracturing process and the reduction of the structural capacity caused by fracturing were also analyzed in this investigation.

scholarly journals Toward the Development of Load Transfer Efficiency Evaluation of Rigid Pavements by a Rolling Wheel Deflectometer

2020 ◽  
Vol 5 (1) ◽  
pp. 7
Author(s):  
Pawan Deep ◽  
Mathias B. Andersen ◽  
Nick Thom ◽  
Davide Lo Presti
Keyword(s):  
Load Transfer ◽  
Three Dimensional ◽  
Transfer Efficiency ◽  
Falling Weight Deflectometer ◽  
Rigid Pavement ◽  
Important Indicator ◽  
Rigid Pavements ◽  
Load Transfer Efficiency ◽  
Rolling Wheel ◽  
Falling Weight

The jointed rigid pavement is currently evaluated by the Falling weight deflectometer which is rather slow for the testing of the jointed pavements. Continuous nondestructive evaluation of rigid pavements with a rolling wheel deflectometer can be used to measure the load transfer and is investigated. Load transfer is an important indicator of the rigid pavement’s condition and this is the primary factor which is studied. Continuous data from experimental measurements across a joint allows for the determination of not only the load transfer efficiency provided parameters characterizing the pavement is known. A three-dimensional semi-analytical model was implemented for simulating the pavement response near a joint and used for interpretation and verification of the experimental data. Results show that this development is promising for the use of a rolling wheel deflectometer for rapid evaluation of joints.

Sign in / Sign up

Export Citation Format

Share Document