scholarly journals Evaluating the application ability of membrane-less microbial fuel cells in shrimp farming wastewater recirculation

2021 ◽  
Vol 5 (1) ◽  
pp. 336-347
Author(s):  
Hoa Thi Pham ◽  
Ngoc Pham ◽  
Huong Que Vo
Keyword(s):  
Fuel Cells ◽  
Growth Performance ◽  
Microbial Fuel Cells ◽  
Shrimp Farming ◽  
Control Treatment ◽  
Anaerobic Sludge ◽  
Penaeus Vannamei ◽  
Carbon Cloth ◽  
Shrimp Culture ◽  
Working Volume

Microbial fuel cell (MFC) was considerable as a promising saline wastewater treatment which using microorganism to convert organic compounds to electrical energy. Most of wastewater generated from aquaculture farming contained highly saline effluents. In addition, the maintenance of good water quality was essential for optimum growth and survival of shrimp. This study aimed to evaluate the ability of Membrane-less Microbial Fuel Cells (MFCs) to treat wastewater for recirculation of shrimp culture wastewater, and improvement in the growth performance of Penaeus vannamei (White Leg Shrimp). Six MFCs models were built with locally available materials such as: polyvinyl chloride (PVC), anaerobic sludge, carbon cloth anode and cathode electrodes, granular graphite, glass wool and glass bead. This study compared two different treatments including: control (cultivation with no MFCs models) and MFCs models (application models with shrimp culture), run in continuous mode at room temperature (250C – 30oC). Each treatment was run in triplicate with shrimp at size PL30-PL45, average initial weight of 0.91 +/- 0 (g) and average initial length of 3.03 +/- 0.6 (cm). Experiments were set up using the 120 L tanks (working volume of 90 L), input with seawater at 20 ppt salinity, temperatures range of 22◦C to 26◦C, pH range of 7.5 to 9.4, and dissolve oxygen range of 5.5 to 7.2. The density of shrimp was 5 post larvae (PL) per liter. Research results achieved the removal of chemical oxygen demand, ammonia, nitrite and nitrate were up to 58.83%, 76.1%, 56.33% and 70.90%, respectively. The survival rate of shrimp was maintained, and growth rate was enhanced significantly compared with control treatment. The obtained results in this study presented that MFCs has ability to treat pre-circulation of shrimp culture wastewater and improved in the growth performance of Penaeus vannamei (White Leg Shrimp).

The high enrichment of Geobacter by TiN nanoarray anode catalyst for efficient microbial fuel cells

2021 ◽  
Vol 9 (12) ◽  
pp. 7726-7735
Author(s):  
Da Liu ◽  
Weicheng Huang ◽  
Qinghuan Chang ◽  
Lu Zhang ◽  
Ruiwen Wang ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Hierarchical Structure ◽  
Microbial Fuel Cells ◽  
Dft Calculation ◽  
Experimental Results ◽  
Carbon Cloth ◽  
Anode Catalyst ◽  
High Enrichment

TiN nanoarrays, in situ grown on carbon cloth gather 97.2% of the model exoelectrogen Geobacter, greatly enhancing the MFCs' performance. The experimental results and DFT calculation certify the importance of the micro–nano-hierarchical structure.

Electrogenic and Antimethanogenic Properties of Bacillus cereus for Enhanced Power Generation in Anaerobic Sludge-Driven Microbial Fuel Cells

2017 ◽  
Vol 31 (6) ◽  
pp. 6132-6139 ◽  
Author(s):  
M. Amirul Islam ◽  
Baranitharan Ethiraj ◽  
Chin Kui Cheng ◽  
Abu Yousuf ◽  
Md. Maksudur Rahman Khan
Keyword(s):  
Power Generation ◽  
Fuel Cells ◽  
Bacillus Cereus ◽  
Microbial Fuel Cells ◽  
Anaerobic Sludge

scholarly journals Scaling up Microbial Fuel Cells for Treating Swine Wastewater

Water ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1803 ◽  
Author(s):  
Yuko Goto ◽  
Naoko Yoshida
Keyword(s):  
Organic Matter ◽  
Fuel Cells ◽  
Microbial Fuel Cells ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Cod Removal ◽  
Swine Wastewater ◽  
Flow Mode ◽  
Carbon Cloth ◽  
Simultaneous Generation

Conventional aerobic treatment of swine wastewater, which generally contains 4500–8200 mg L−1 of organic matter, is energy-consuming. The aim of this study was to assess the application of scaled-up microbial fuel cells (MFCs) with different capacities (i.e., 1.5 L, 12 L, and 100 L) for removing organic matter from swine wastewater. The MFCs were single-chambered, consisting of an anode of microbially reduced graphene oxide (rGO) and an air-cathode of platinum-coated carbon cloth. The MFCs were polarized via an external resistance of 3–10 Ω for 40 days for the 1.5 L-MFC and 120 days for the 12L- and 100 L-MFC. The MFCs were operated in continuous flow mode (hydraulic retention time: 3–5 days). The 100 L-MFC achieved an average chemical oxygen demand (COD) removal efficiency of 52%, which corresponded to a COD removal rate of 530 mg L−1 d−1. Moreover, the 100 L-MFC showed an average and maximum electricity generation of 0.6 and 2.2 Wh m−3, respectively. Our findings suggest that MFCs can effectively be used for swine wastewater treatment coupled with the simultaneous generation of electricity.

Enhanced performances of microbial fuel cells using surface-modified carbon cloth anodes: A comparative study

2014 ◽  
Vol 39 (33) ◽  
pp. 19148-19155 ◽  
Author(s):  
Jun Zhang ◽  
Jun Li ◽  
Dingding Ye ◽  
Xun Zhu ◽  
Qiang Liao ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Comparative Study ◽  
Microbial Fuel Cells ◽  
Carbon Cloth ◽  
Surface Modified

scholarly journals Using Shewanella Oneidensis MR1 as a Biocatalyst in a Microscale Microbial Fuel Cell

2013 ◽  
Author(s):  
Jie Yang ◽  
Sasan Ghobadian ◽  
Reza Montazami ◽  
Nastaran Hashemi
Keyword(s):  
Power Generation ◽  
Fuel Cells ◽  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Shewanella Oneidensis ◽  
Proton Exchange ◽  
Carbon Cloth ◽  
Anode Chamber

Microbial fuel cell (MFC) technology is a promising area in the field of renewable energy because of their capability to use the energy contained in wastewater, which has been previously an untapped source of power. Microscale MFCs are desirable for their small footprints, relatively high power density, fast start-up, and environmentally-friendly process. Microbial fuel cells employ microorganisms as the biocatalysts instead of metal catalysts, which are widely applied in conventional fuel cells. MFCs are capable of generating electricity as long as nutrition is provided. Miniature MFCs have faster power generation recovery than macroscale MFCs. Additionally, since power generation density is affected by the surface-to-volume ratio, miniature MFCs can facilitate higher power density. We have designed and fabricated a microscale microbial fuel cell with a volume of 4 μL in a polydimethylsiloxane (PDMS) chamber. The anode and cathode chambers were separated by a proton exchange membrane. Carbon cloth was used for both the anode and the cathode. Shewanella Oneidensis MR-1 was chosen to be the electrogenic bacteria and was inoculated into the anode chamber. We employed Ferricyanide as the catholyte and introduced it into the cathode chamber with a constant flow rate of approximately 50 μL/hr. We used trypticase soy broth as the bacterial nutrition and added it into the anode chamber approximately every 15 hours once current dropped to base current. Using our miniature MFC, we were able to generate a maximum current of 4.62 μA.

The Electrical Properties and Changes on the Substrates of Microbial Fuel Cells Using Excess Sludge

2014 ◽  
Vol 535 ◽  
pp. 141-144
Author(s):  
Xiao Qin Zhao ◽  
Xiao Jie Sun
Keyword(s):  
Fuel Cells ◽  
Anaerobic Digestion ◽  
Microbial Fuel Cells ◽  
Control Device ◽  
Anaerobic Sludge ◽  
Excess Sludge ◽  
Test Volume ◽  
Significant Difference ◽  
Nacl Concentration ◽  
Anode Area

A single-chamber and membrane-less microbial fuel cells (MFC) was successfully started up using anaerobic sludge as inoculums without any nutrient elements for 20 d. Under 30 °C, excess sludge SS was about 21000 mg·L-1, anode area for 31.4 cm2and in 200 mM NaCl concentration agent conditions experiment MFC, while the control device (CD) directly with original sludge anaerobic digestion. The electricity generation of microbial fuel cell and the contrast of substrate changes were investigated. The results show that obtained maximum voltage is 597.3 mV, pH in MFC is slightly higher than in contrast test. Volume reduction in MFC is larger than the controls. Reducing sugar in MFC is lower than that in CDs. Proteins increase at first and then decrease, finally there is no significant difference in both of MFC and CD. Key words: Microbial Fuel Cells, Excess Sludge, Anaerobic Digestion, Reutilization

Optimization of sensing performance in an integrated dual sensors system combining microbial fuel cells and upflow anaerobic sludge bed reactor

Chemosphere ◽  
2018 ◽  
Vol 210 ◽  
pp. 931-940 ◽  
Author(s):  
Hui Jia ◽  
Wenbin Liu ◽  
Jie Wang ◽  
Huu-Hao Ngo ◽  
Wenshan Guo ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Microbial Fuel Cells ◽  
Anaerobic Sludge ◽  
Sensing Performance

scholarly journals Improving the Performance of Microbial Fuel Cells with Modified Carbon Aerogel Based Cathode Catalysts

2021 ◽  
Author(s):  
Bálint Lóránt ◽  
Krisztina László ◽  
Gábor Márk Tardy
Keyword(s):  
Graphene Oxide ◽  
Fuel Cells ◽  
Noble Metal ◽  
Microbial Fuel Cells ◽  
Carbon Aerogel ◽  
Carbon Powder ◽  
Carbon Cloth ◽  
Cathode Catalysts ◽  
Metal Free ◽  
Co Doping

Microbial fuel cells (MFCs) are capable of converting the chemical energy of biodegradable organic matter directly into electricity, thus they can be applied in various fields: waste elimination, biosensor industry and production of renewable energy. In this study, the efficiency of noble metal free carbon aerogel based cathode catalysts was investigated and compared to plain glassy carbon cloth without catalyst (CC ) and platinum containing carbon powder catalyst ( PtC ) in H-type MFCs. Surface extension by carbon aerogel (CA ) enhanced the maximum power density by 34 % compared to CC, to 14.1 W m−3. With nitrogen doped carbon aerogel (NCA) the performance was further increased to 15.7 W m−3. Co-doping the resorcinol-melamine-formaldehyde based aerogel with graphene oxide (GNCA) resulted in an additional power increase of 70 %, indicating that the electrocatalytic activity of NCAs can be considerably improved by co-doping with graphene oxide. Although the performance of GNCA remained below that of PtC (50.2 W m−3) in our investigations, it can be concluded that GNCA based coatings may provide a noble metal free, and therefore competitive and sustainable alternatives for cathode catalysis in MFC based technologies.

Sign in / Sign up

Export Citation Format

Share Document