scholarly journals Licensing of the Neutron Source in Ukraine: Challenges and Solutions

2019 ◽  
pp. 18-24
Author(s):  
O. Kukhotskyi ◽  
I. Bilodid ◽  
A. Shepitchak ◽  
S. Nemtsova
Keyword(s):  
Neutron Source ◽  
Radiation Safety ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Nuclear Research ◽  
Legal Framework ◽  
Scientific Center ◽  
Fundamental Research ◽  
Nuclear And Radiation Safety ◽  
Operating Organization

A research nuclear facility, the Neutron Source Based on the Subcritical Assembly Driven by a Linear Electron Accelerator (Neutron Source), is under commissioning in the National Scientific Center “Kharkiv Institute of Physics and Technology” (NSC KIPT), Ukraine, as an international collaborative project of NSC KIPT and the Argonne National Laboratory (ANL), USA. The Neutron Source is intended to study subcritical systems and generate neutrons to be used in applied and fundamental research in physics, chemistry, biology, and medicine. The construction of a state-of-art nuclear research facility is a challenge for both the operating organization (NSC KIPT) and the regulatory authority (SNRIU). NSC KIPT faced the technical challenges caused by the unique design features of the facility. SNRIU faced the two major challenges: no regulations to govern nuclear and radiation safety; no experience in licensing such a type of facility. This paper discusses aspects related to the challenges and solutions in licensing of the Neutron Source, including development of the regulatory and legal framework on nuclear and radiation safety, review of the safety justification documents for the new nuclear subcritical facility and verification calculations.

Correspondent's Report: The Intense Pulsed Neutron Source at Argonne National Laboratory

Neutron News ◽  
2004 ◽  
Vol 15 (3) ◽  
pp. 1-1
Author(s):  
Raymond Teller ◽  
James Richardson ◽  
John Carpenter
Keyword(s):  
Neutron Source ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Pulsed Neutron ◽  
Pulsed Neutron Source

scholarly journals Experience of Separating Regulatory and Technical Requirements for Nuclear and Radiation Safety

2016 ◽  
pp. 3-12
Author(s):  
M. Yastrebenetsky ◽  
Yu. Rozen ◽  
I. Shevchenko ◽  
O. Dybach ◽  
O. Hryhorash
Keyword(s):  
Control Systems ◽  
Radiation Safety ◽  
Legal Framework ◽  
Functional Safety ◽  
Regulatory Requirements ◽  
Regulatory Documents ◽  
Technical Requirements ◽  
Nuclear And Radiation Safety ◽  
Standard Practices ◽  
And Control

Within the concept of improving the regulatory and legal framework of Ukraine on nuclear and radiation safety, the paper justifies the need for separation of proven and generally accepted safety principles formulated in the legal and regulatory documents as obligatory (“regulatory”) requirements and “technical” requirements established in the standards of the operating organizations and/or codes of standard practices, which explain in details regulatory requirements from the documents of higher level. The paper considers the results based on the development of first in Ukraine standards, regulations and rules on functional safety of instrumentation and control systems and their components, where the separation of regulatory and technical requirements is implemented.

Electron and ion irradiation-induced dissolution of mechanical twins in the intermetalic U3Si: An in situ HVEM study

1989 ◽  
Vol 47 ◽  
pp. 652-653
Author(s):  
Charles W. Allen ◽  
Robert C. Birtcher
Keyword(s):  
Elevated Temperatures ◽  
Ion Irradiation ◽  
Ion Beam ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Heavy Ion ◽  
High Energy ◽  
Mechanical Twinning ◽  
In Situ Experiments

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.

Environmental cell studies of deformation and fracture

1990 ◽  
Vol 48 (4) ◽  
pp. 516-517
Author(s):  
H. K. Birnbaum ◽  
I. M. Robertson
Keyword(s):  
National Laboratory ◽  
Argonne National Laboratory ◽  
Damage Threshold ◽  
Chromatic Aberration ◽  
Good Choice ◽  
Point Of View ◽  
Deformation And Fracture ◽  
Environmental Cell ◽  
Gas Molecules ◽  
The University

Studies of the effects of hydrogen environments on the deformation and fracture of fcc, bcc and hep metals and alloys have been carried out in a TEM environmental cell. The initial experiments were performed in the environmental cell of the HVEM facility at Argonne National Laboratory. More recently, a dedicated environmental cell facility has been constructed at the University of Illinois using a JEOL 4000EX and has been used for these studies. In the present paper we will describe the general design features of the JEOL environmental cell and some of the observations we have made on hydrogen effects on deformation and fracture.The JEOL environmental cell is designed to operate at 400 keV and below; in part because of the available accelerating voltage of the microscope and in part because the damage threshold of most materials is below 400 keV. The gas pressure at which chromatic aberration due to electron scattering from the gas molecules becomes excessive does not increase rapidly with with accelerating voltage making 400 keV a good choice from that point of view as well. A series of apertures were placed above and below the cell to control the pressures in various parts of the column.

scholarly journals NEW STRUCTURES IN 178HF AND COULOMB EXCITATION OF ISOMERS

2011 ◽  
Vol 20 (02) ◽  
pp. 474-481 ◽  
Author(s):  
A.B. HAYES ◽  
D. CLINE ◽  
C. Y. WU ◽  
A.M. HURST ◽  
M.P. CARPENTER ◽  
...  
Keyword(s):  
Angular Momentum ◽  
Ground State ◽  
Coulomb Excitation ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Particle Detector ◽  
Ground State Band ◽  
Rotational Bands ◽  
Coincidence Data ◽  
State Band

A 985 MeV 178 Hf beam was Coulomb excited by a 208 Pb target at the ATLAS accelerator of Argonne National Laboratory. Gammasphere and the CHICO particle detector recorded particle-γ coincidence data. The aim was to populate and determine the mechanism of previously observed Coulomb excitation of the Kπ = 6+ (t1/2 = 77 ns ), 8- (4 s ) and 16+ (31 y ) isomer bands. New rotational bands were identified including an aligned band which appears to mix with the ground-state band (GSB) and the γ-vibrational band above ~ 12 ħ of angular momentum. Newly observed γ-decay transitions into the three isomer bands may elucidate the K-mixing which allows Coulomb excitation of these isomer bands, but direct decays from the GSB into the 16+ isomer band have not yet been confirmed.

Sign in / Sign up

Export Citation Format

Share Document