scholarly journals Examining Plasmid Transfer of pJP4 in a Mixed Community Biofilm Formed in a Microcosm Simulating a Porous Aquifer

2021 ◽  
Author(s):  
Floriana Postelnik
Keyword(s):  
Laser Scanning ◽  
Selective Pressure ◽  
Plasmid Transfer ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Porous Aquifer ◽  
Groundwater Aquifer ◽  
Plate Counts ◽  
Minimal Media ◽  
Mixed Community

In this work, a lab-scale microcosm was designed and used to simulate a porous groundwater aquifer. A minimal media acted as the non-selective pressure for plasmid transfer, while a minimal media with gentamicin acted as the selective pressure. PCR, plate counts and confocal laser scanning microscopy were used to monitor transconjugant and donor persistence in the microcosm. The donor was identified through

scholarly journals Examining Plasmid Transfer of pJP4 in a Mixed Community Biofilm Formed in a Microcosm Simulating a Porous Aquifer

2021 ◽  
Author(s):  
Floriana Postelnik
Keyword(s):  
Laser Scanning ◽  
Selective Pressure ◽  
Plasmid Transfer ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Porous Aquifer ◽  
Groundwater Aquifer ◽  
Plate Counts ◽  
Minimal Media ◽  
Mixed Community

In this work, a lab-scale microcosm was designed and used to simulate a porous groundwater aquifer. A minimal media acted as the non-selective pressure for plasmid transfer, while a minimal media with gentamicin acted as the selective pressure. PCR, plate counts and confocal laser scanning microscopy were used to monitor transconjugant and donor persistence in the microcosm. The donor was identified through

scholarly journals Plasmid Transfer from Pseudomonas putida to the Indigenous Bacteria on Alfalfa Sprouts: Characterization, Direct Quantification, and In Situ Location of Transconjugant Cells

2003 ◽  
Vol 69 (9) ◽  
pp. 5536-5542 ◽  
Author(s):  
Lars Mølbak ◽  
Tine Rask Licht ◽  
Thomas Kvist ◽  
Niels Kroer ◽  
Sigrid Rita Andersen
Keyword(s):  
Bacterial Community ◽  
Pseudomonas Putida ◽  
Laser Scanning ◽  
Plasmid Transfer ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Indigenous Bacteria ◽  
Rdna Sequencing ◽  
Alfalfa Sprouts ◽  
Direct Quantification

ABSTRACT The transfer of the plasmids pJKJ5 and TOL (pWWO) from Pseudomonas putida to the indigenous bacterial community on alfalfa sprouts was studied. Tagging with fluorescent protein markers allowed direct quantification of the introduced donor bacteria and of indigenous bacteria that had received the plasmids. The sprouts were observed for 9 days; during this time alfalfa seeds, inoculated with donor bacteria, developed to edible and subsequently decaying sprouts. The first transconjugants were detected on day 6 after donor inoculation and occurred at frequencies of 3.4 × 10−4 and 2.0 × 10−6 transconjugant cells per donor cell for pKJK5::gfp and TOL::gfp, respectively. Confocal laser scanning microscopy revealed that the sprouts were heavily colonized with donors and that most transconjugants were located around the hypocotyl and root areas. Randomly selected members of the indigenous bacterial community from both inoculated and uninoculated sprouts, as well as a representative part of the community that had received the plasmids, were characterized by polymorphisms of PCR-amplified ribosomal DNA (rDNA) spacer regions between the 16S and 23S genes, followed by partial 16S rDNA sequencing. This showed that the initially dominating genera Erwinia and Paenibacillus were gradually replaced by Pseudomonas on the fully developed sprouts. Transconjugants carrying either of the investigated plasmids mainly belonged to the genera Pseudomonas and Erwinia. The numbers of transconjugant cells did not reach detectable levels until 6 days after the onset of germination, at which point these species constituted the majority of the indigenous bacteria. In conclusion, the alfalfa sprouts provided an environment that allowed noteworthy frequencies of plasmid transfer from P. putida in the absence of selective pressure that could favor the presence of the investigated plasmids.

3-D imaging of cells using a confocal laser scanning microscope and digital image processing

1988 ◽  
Vol 46 ◽  
pp. 96-97
Author(s):  
Thomas M. Jovin ◽  
Michel Robert-Nicoud ◽  
Donna J. Arndt-Jovin ◽  
Thorsten Schormann
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Scanning Microscope ◽  
Laser Scanning Microscope ◽  
Biochemical Processes ◽  
Adjacent Structures

Light microscopic techniques for visualizing biomolecules and biochemical processes in situ have become indispensable in studies concerning the structural organization of supramolecular assemblies in cells and of processes during the cell cycle, transformation, differentiation, and development. Confocal laser scanning microscopy offers a number of advantages for the in situ localization and quantitation of fluorescence labeled targets and probes: (i) rejection of interfering signals emanating from out-of-focus and adjacent structures, allowing the “optical sectioning” of the specimen and 3-D reconstruction without time consuming deconvolution; (ii) increased spatial resolution; (iii) electronic control of contrast and magnification; (iv) simultanous imaging of the specimen by optical phenomena based on incident, scattered, emitted, and transmitted light; and (v) simultanous use of different fluorescent probes and types of detectors.We currently use a confocal laser scanning microscope CLSM (Zeiss, Oberkochen) equipped with 3-laser excitation (u.v - visible) and confocal optics in the fluorescence mode, as well as a computer-controlled X-Y-Z scanning stage with 0.1 μ resolution.

Vacuoles Induced in Mammalian Cells by Helicobacter Cytotoxin are Acidic Organelles

1990 ◽  
Vol 48 (3) ◽  
pp. 168-169
Author(s):  
M. H. Chestnut ◽  
C. E. Catrenich
Keyword(s):  
Acridine Orange ◽  
Mammalian Cells ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Ulcer Disease ◽  
Gastroduodenal Disease ◽  
H Pylori

Helicobacter pylori is a non-invasive, Gram-negative spiral bacterium first identified in 1983, and subsequently implicated in the pathogenesis of gastroduodenal disease including gastritis and peptic ulcer disease. Cytotoxic activity, manifested by intracytoplasmic vacuolation of mammalian cells in vitro, was identified in 55% of H. pylori strains examined. The vacuoles increase in number and size during extended incubation, resulting in vacuolar and cellular degeneration after 24 h to 48 h. Vacuolation of gastric epithelial cells is also observed in vivo during infection by H. pylori. A high molecular weight, heat labile protein is believed to be responsible for vacuolation and to significantly contribute to the development of gastroduodenal disease in humans. The mechanism by which the cytotoxin exerts its effect is unknown, as is the intracellular origin of the vacuolar membrane and contents. Acridine orange is a membrane-permeant weak base that initially accumulates in low-pH compartments. We have used acridine orange accumulation in conjunction with confocal laser scanning microscopy of toxin-treated cells to begin probing the nature and origin of these vacuoles.

Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation

TAPPI Journal ◽  
2010 ◽  
Vol 9 (10) ◽  
pp. 7-15
Author(s):  
HANNA KOIVULA ◽  
DOUGLAS BOUSFIELD ◽  
MARTTI TOIVAKKA
Keyword(s):  
Laser Scanning ◽  
Confocal Laser Scanning Microscope ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Print Quality ◽  
Length Scale ◽  
Offset Printing ◽  
Significant Difference ◽  
Printing Speed

In the offset printing process, ink film splitting has an important impact on formation of ink filaments. The filament size and its distribution influence the leveling of ink and hence affect ink setting and the print quality. However, ink filaments are difficult to image due to their short lifetime and fine length scale. Due to this difficulty, limited work has been reported on the parameters that influence filament size and methods to characterize it. We imaged ink filament remains and quantified some of their characteristics by changing printing speed, ink amount, and fountain solution type. Printed samples were prepared using a laboratory printability tester with varying ink levels and operating settings. Rhodamine B dye was incorporated into fountain solutions to aid in the detection of the filaments. The prints were then imaged with a confocal laser scanning microscope (CLSM) and images were further analyzed for their surface topography. Modeling of the pressure pulses in the printing nip was included to better understand the mechanism of filament formation and the origin of filament length scale. Printing speed and ink amount changed the size distribution of the observed filament remains. There was no significant difference between fountain solutions with or without isopropyl alcohol on the observed patterns of the filament remains.

ACTIVATED SLUDGE FLOC CHARACTERIZATION BY CONFOCAL LASER SCANNING MICROSCOPY

2012 ◽  
Vol 11 (3) ◽  
pp. 669-674 ◽  
Author(s):  
Szabolcs Szilveszter ◽  
Botond Raduly ◽  
Szilard Bucs ◽  
Beata Abraham ◽  
Szabolcs Lanyi ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Scanning Microscopy ◽  
Confocal Laser

Cuticular structures in the copulatory apparatus of Planorbis planorbis (Linnaeus, 1758) (Gastropoda: Pulmonata: Planorbidae)

2009 ◽  
Vol 18 (1) ◽  
pp. 11-16
Author(s):  
E.V. Soldatenko ◽  
A.A. Petrov
Keyword(s):  
Light Microscopy ◽  
Confocal Laser Scanning Microscopy ◽  
Laser Scanning ◽  
Taxonomic Status ◽  
Laser Scanning Microscopy ◽  
Confocal Laser Scanning ◽  
Confocal Laser ◽  
Copulatory Apparatus ◽  
The Family ◽  
Cuticular Structures

The morphology of the copulatory apparatus and associated cuticular structures in Planorbis planorbis was studied by light microscopy, SEM, TEM and confocal laser scanning microscopy. The significance of these cuticular structures for the taxonomic status of the species and for the systematics of the family Planorbidae in general is discussed.

Sign in / Sign up

Export Citation Format

Share Document