scholarly journals Energy Efficiency and Thermal Performance of Office Buildings Integrated with Passive Strategies in Coastal Regions of Humid and Hot Tropical Climates in Madagascar

2020 ◽  
Vol 10 (7) ◽  
pp. 2438
Author(s):  
Modeste Kameni Nematchoua ◽  
Jean Christophe Vanona ◽  
José A. Orosa

Researchers have used passive strategies, such as the implementation of thermal insulation and the use of phase change materials (PCM), in several studies, but some problems have not yet been solved. It is the case of showing the real effect of external shading combined with thermal insulation and phase change materials to improve the thermal performance and energy efficiency of office buildings in tropical coastal areas. Another pending problem to be solved is to define the impact produced by passive strategies on the performance of workers in office buildings in coastal zones. It is with a view to answering all these questions that this study was envisaged with the main objective of evaluating, analyzing, comparing, and discussing the effect of thermal insulation and phase change materials on thermal comfort and energy demand in coastal areas of hot and humid tropical climates located in the island of Madagascar. In this sense, hourly climate data for the past 30 years have served as the basis for assessing environmental conditions of future climate. It was found that the PCMs have a more significant effect on the coastal zone of hot climates than humid tropical climates. The results of the statistical analyses showed that the application of passive strategies stabilizes indoor air temperatures to between 23 °C and 28 °C in the offices, which is the recommended comfort range in these regions. In the coastal regions of Madagascar, up to 30% of cooling energy is expected to be reduced by combining the introduction of thermal insulation and PCM materials.

Energies ◽  
2017 ◽  
Vol 10 (8) ◽  
pp. 1214 ◽  
Author(s):  
Yi Zhang ◽  
Hongzhi Cui ◽  
Waiching Tang ◽  
Guochen Sang ◽  
Hong Wu

2018 ◽  
Vol 281 ◽  
pp. 131-136
Author(s):  
Shi Chao Zhang ◽  
Wei Wu ◽  
Yu Feng Chen ◽  
Liu Shi Tao ◽  
Kai Fang ◽  
...  

With the increase of the speed of vehicle, the thermal protection system of its powerplant requires higher insulation materials. Phase change materials can absorb large amounts of heat in short time. So the introduction of phase change materials in thermal insulation materials can achieve efficient insulation in a limited space for a short time. In this paper, a new phase change thermal insulation material was prepared by pressure molding with microporous calcium silicate as matrix and Li2CO3 as phase change material. The morphology stability, exudation and heat insulation of the materials were tested. The results show that the porous structure of microporous calcium silicate has a good encapsulation when the phase transition of Li2CO3 is changed into liquid. And the material has no leakage during use. The thermal performance test also shows that the insulation performance of the material has obvious advantages in the short term application.


Sign in / Sign up

Export Citation Format

Share Document