scholarly journals Application of Broadband Microwave Near-Field Sensors for Glucose Monitoring in Biological Media

2021 ◽  
Vol 11 (4) ◽  
pp. 1470
Author(s):  
Andrey S. Zapasnoy ◽  
Victor P. Belichenko ◽  
Vladimir P. Yakubov ◽  
Aleksandr V. Gorst ◽  
Aleksandr S. Mironchev ◽  
...  

The paper presents results of numerical simulation and experimental testing of a microwave sensor for non-invasive glucose monitoring. The sensor represents a conical horn with a conical conductor inside expanding toward the horn aperture. Such a sensor has a significantly wider passband in comparison with sensors of other designs. It is essential that the sensor geometry provides formation of an extended near-field zone with high electric field strength near the sensor aperture. A clear relationship between the dielectric permittivity of the phantom biological tissue and the frequency dependence of the parameter S11 of the sensor is observed at frequencies in the range from 1.4 to 1.7 GHz. This circumstance can be used to develop a procedure for measuring the glucose level in blood that correlates with the parameter S11 of the sensor. From the viewpoint of monitoring of the glucose content in blood, the most convenient body sensor location is on the hands or feet, in particular, wrists.

2019 ◽  
Vol 53 (2 (249)) ◽  
pp. 132-137
Author(s):  
B.A. Hovhannisyan ◽  
D.S. Hambaryan ◽  
L.A. Odabashyan ◽  
A.Zh. Babajanyan

In this study we present a microwave sensor based on the quadratic-shape and designed for detecting glucose concentration in aqueous solutions by using a microwave near-field electromagnetic interaction technique. We found a linear relationship between the microwave $ S_{11} $ reflection coefficient of the suggested system and the concentration of glucose in solution. Due to this linear relationship we were able to determine the glucose concentration in the range of 0–250 mg/dL at an operating frequency near 3.6 GHz. The measured minimum detectable signal was 0.0044 dB/(mg/dL) and the measured minimum detectable concentration was 6.8 mg/dL. These results suggest that the system we offer has a high enough accuracy for non-contact glucose monitoring and provides a promising basis for developing a non-invasive glucometer.


Biosensors ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 189
Author(s):  
David Bamgboje ◽  
Iasonas Christoulakis ◽  
Ioannis Smanis ◽  
Gaurav Chavan ◽  
Rinkal Shah ◽  
...  

Diabetes mellitus (DM) is a chronic disease that must be carefully managed to prevent serious complications such as cardiovascular disease, retinopathy, nephropathy and neuropathy. Self-monitoring of blood glucose is a crucial tool for managing diabetes and, at present, all relevant procedures are invasive while they only provide periodic measurements. The pain and measurement intermittency associated with invasive techniques resulted in the exploration of painless, continuous, and non-invasive techniques of glucose measurement that would facilitate intensive management. The focus of this review paper is the existing solutions for continuous non-invasive glucose monitoring via contact lenses (CLs) and to carry out a detailed, qualitative, and comparative analysis to inform prospective researchers on viable pathways. Direct glucose monitoring via CLs is contingent on the detection of biomarkers present in the lacrimal fluid. In this review, emphasis is given on two types of sensors: a graphene-AgNW hybrid sensor and an amperometric sensor. Both sensors can detect the presence of glucose in the lacrimal fluid by using the enzyme, glucose oxidase. Additionally, this review covers fabrication procedures for CL biosensors. Ever since Google published the first glucose monitoring embedded system on a CL, CL biosensors have been considered state-of-the-art in the medical device research and development industry. The CL not only has to have a sensory system, it must also have an embedded integrated circuit (IC) for readout and wireless communication. Moreover, to retain mobility and ease of use of the CLs used for continuous glucose monitoring, the power supply to the solid-state IC on such CLs must be wireless. Currently, there are four methods of powering CLs: utilizing solar energy, via a biofuel cell, or by inductive or radiofrequency (RF) power. Although, there are many limitations associated with each method, the limitations common to all, are safety restrictions and CL size limitations. Bearing this in mind, RF power has received most of the attention in reported literature, whereas solar power has received the least attention in the literature. CLs seem a very promising target for cutting edge biotechnological applications of diagnostic, prognostic and therapeutic relevance.


2000 ◽  
Vol 88 (5) ◽  
pp. 2541-2547 ◽  
Author(s):  
N. Richard ◽  
A. Dereux ◽  
E. Bourillot ◽  
T. David ◽  
J. P. Goudonnet ◽  
...  

Author(s):  
M. Hofmann ◽  
M. Bloss ◽  
R. Weigel ◽  
G. Fischer ◽  
D. Kissinger

Sign in / Sign up

Export Citation Format

Share Document