scholarly journals Punching Shear Strength of Reinforced Concrete Flat Plates with GFRP Vertical Grids

2021 ◽  
Vol 11 (6) ◽  
pp. 2736
Author(s):  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Reinforced Concrete ◽  
Fiber Reinforced Polymer ◽  
Punching Shear ◽  
Test Results ◽  
Shear Reinforcement ◽  
Flat Plates ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Vertical Grids

In this study, the structural behavior of reinforced concrete flat plates shear reinforced with vertical grids made of a glass fiber reinforced polymer (GFRP) was experimentally evaluated. To examine the shear strength, experiments were performed on nine concrete slabs with different amounts and spacings of shear reinforcement. The test results indicated that the shear strength increased as the amount of shear reinforcement increased and as the spacing of the shear reinforcement decreased. The GFRP shear reinforcement changed the cracks and failure mode of the specimens from a brittle punching to flexure one. In addition, the experimental results are compared with a shear strength equation provided by different concrete design codes. This comparison demonstrates that all of the equations underestimate the shear strength of reinforced concrete flat plates shear reinforced with GFRP vertical grids. The shear strength of the equation by BS 8110 is able to calculate the punching shear strength reasonably for a concrete flat plate shear reinforced with GFRP vertical grids.

scholarly journals Evaluation of Shear Strength of Concrete Flat Plates Reinforced with GFRP Plates

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Fiber Reinforced Polymer ◽  
Punching Shear ◽  
Shear Reinforcement ◽  
Flat Plates ◽  
Shear Tests ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Shear Performance ◽  
Strength Formula

The shear performance of concrete flat plates with glass fiber-reinforced polymer (GFRP) plate shear reinforcement was investigated through punching shear tests. Each GFRP plate was embedded in the concrete and included openings to permit the flow of concrete during fabrication. Punching shear tests were conducted on a total of 8 specimens, and the resulting crack and fracture formations, strains, and load-displacement curves were analyzed and compared. The experimental variables considered were the types of shear reinforcement, including steel stirrups or GFRP plates, and the shear reinforcement spacing. The experimental results show that the GFRP shear reinforcement effectively increased the shear strengths of flat plates. Furthermore, the applicability of two formulas was investigated: a modified version of a shear strength formula from ACI 318-14 and the ACI 318-14 fracture prediction formula.

Shear Strength of Concrete Wide Beams Shear Reinforced with GFRP Plates

2018 ◽  
Vol 26 (1) ◽  
pp. 111-118
Author(s):  
Min Sook Kim ◽  
Joowon Kang ◽  
Young Hak Lee
Keyword(s):  
Shear Strength ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Shear Reinforcement ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Shear Performance ◽  
Wide Beams ◽  
Better Than

This paper discusses the experimental results on the shear behavior of concrete wide beams reinforced with glass fiber reinforced polymer (GFRP) plates as shear reinforcement. In order to examine the shear performance, a total of six concrete wide beams were manufactured and tested. All the specimens were designed to have the same number of legs of shear reinforcement. The transverse spacing of shear reinforcement was considered as a variable to investigate the influence of transverse spacing of concrete wide beams. From the test results, it is observed that the shear strength increased when transverse spacing of the shear reinforcement decreased. In addition, an equation is proposed to predict the shear strength of concrete wide beams in order to consider the influence of transverse spacing of the shear reinforcement. The equation is based on the test results and modified ACI 318–14. It is verified that the proposed equation is considered to be better than ACI 318–14.

Strengthening of reinforced concrete corbels with GFRP overlays

2011 ◽  
Vol 18 (1-2) ◽  
pp. 69-77 ◽  
Author(s):  
Sevket Ozden ◽  
Hilal Meydanli Atalay
Keyword(s):  
Reinforced Concrete ◽  
Reinforcement Ratio ◽  
Fiber Reinforced Polymer ◽  
Peak Performance ◽  
Test Results ◽  
Loading Test ◽  
Load Bearing Capacity ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Normal Strength

AbstractThe strength and post-peak performance of reinforced concrete corbels, strengthened with epoxy bonded glass fiber reinforced polymer (GFRP) overlays, were experimentally investigated. The test variables were the corbel shear span to depth ratio, corbel main reinforcement ratio, and the number and orientation of the GFRP fibers. In total, 24 normal strength concrete, one-third scale, corbel specimens, without hoop reinforcement, were tested to failure under quasi-static gravity loading. Test results revealed that GFRP overlays can easily be used for the enhancement of corbel load bearing capacity, depending on the fiber orientation. The main reinforcement ratio and the number of GFRP plies were found to be the two main variables affecting the level of strength gain in the corbel specimens.

scholarly journals Shear Behavior in Beams Reinforced with Glass-Fiber Reinforced Polymer Bars (GFRPB) without stirrups

2021 ◽  
Vol 9 (1) ◽  
pp. 72-78
Author(s):  
Osama Daoud ◽  
Ahmed Fadul
Keyword(s):  
Shear Strength ◽  
Glass Fiber ◽  
Concrete Beams ◽  
Fiber Reinforced Polymer ◽  
Test Results ◽  
Glass Fiber Reinforced Polymer ◽  
Shear Span ◽  
Gfrp Bars ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

The behavior and shear strength of concrete beams reinforced with glass fiber-reinforced polymer (GFRP) bars was investigated. Total of six reinforced concrete beams without stirrups were constructed and tested up to failure. The beams measured 1400 mm long, 150 mm wide and 300 mm deep and were tested in two-points bending with constant shear span 350 mm in all tested beams, and shear span to depth ratio a/d 1.37. The test variable was the reinforcement ratio. The test beams included three beams designed as tension control (T.C) with GFRP bars, three beams designed as compression control (C.C) with GFRP bars. The test results were compared with predictions provided by ACI 440.1R-15 design guideline and proposed equations in the literature. The test results indicated that the relatively low modulus of elasticity of FRP bars resulted in reducing shear strength. In addition, shear strength provided by ACI 440.1R-15 guideline underestimate shear strength capacity in which proposed equations in the literature had given better prediction than ACI 440.1R-15. The failure mode in T.C beams is diagonal tension by bond failure not by rupture of FRP and C.C beams is shear compression by crushing of the web in extreme fiber.  

scholarly journals Strengthening of Reinforced Concrete Slab-Column Connections with Carbon Fiber Reinforced Polymer Laminates

2019 ◽  
Vol 10 (1) ◽  
pp. 265 ◽  
Author(s):  
Cheng-Chih Chen ◽  
Shun-Long Chen
Keyword(s):  
Compressive Strength ◽  
Shear Strength ◽  
Reinforced Concrete ◽  
Carbon Fiber ◽  
Concrete Slab ◽  
Fiber Reinforced Polymer ◽  
Punching Shear ◽  
Carbon Fiber Reinforced Polymer ◽  
Cfrp Laminates ◽  
Reinforced Polymer

This study presents the structural behavior and punching shear strength of the concrete slab-column connections strengthened with carbon fiber reinforced polymer (CFRP) laminates. The variables considered for the twelve specimens included the compressive strength of the concrete, the ratio of the tensile steel reinforcement, and the amount of the CFRP laminates. Square concrete slabs were simply supported along four edges. During the test, monotonically concentrated load was applied to the stub column located at the center of the slab. The punching shear strength, stiffness, and mode of failure were investigated. Test results demonstrated that increasing the compressive strength of concrete, ratio of the steel reinforcement, and amount of the CFRP laminates led to an increase in the punching shear strength of the slabs. Moreover, the CFRP laminates were effective in appreciably increasing the punching shear strength of the slab-column connections. An analytical approach was conducted to calculate the punching shear strength of the slab-column connections strengthened with CFRP laminates. Based on the theory of reinforced concrete members, the application of the CFRP laminates increased the flexural strength of the slab and resulted in an increase of the effective depth of the slab section. Consequently, the punching shear strength was increased. The results of the analytical calculation revealed that the analytical work accurately predicted the experimental punching shear strength.

Sign in / Sign up

Export Citation Format

Share Document