scholarly journals Design and Application of a Standalone Hybrid Wind–Solar System for Automatic Observation Systems Used in the Polar Region

2018 ◽  
Vol 8 (12) ◽  
pp. 2376 ◽  
Author(s):  
Guangyu Zuo ◽  
Yinke Dou ◽  
Xiaomin Chang ◽  
Yan Chen
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Solar System ◽  
Low Temperature ◽  
Power System ◽  
Power Supply ◽  
The Arctic ◽  
Polar Regions ◽  
Observation Systems ◽  
Continuous Power

Continuous power supply for unmanned and automatic observation systems without suitable energy-storage capabilities in the polar regions is an urgent problem and challenge. However, few power-supply systems can stably operate over the long term in extreme environments, despite excellent performance under normal environments. In this study, a standalone hybrid wind–solar system is proposed, based on operation analysis of the observing system in the Arctic Ocean, the polar environments, and renewable-energy distribution in the polar regions. Energy-storage technology suitable for cold regions is introduced to support the standalone hybrid wind–solar system. Mathematical models of the power system at low temperature are also proposed. The low-temperature performance and characteristics of lead–acid battery are comprehensively elucidated, and a dedicated charging strategy is developed. A hybrid wind–solar charging circuit is developed using a solar charging circuit, a wind turbine charging circuit, a driver circuit, a detection circuit, an analog-to-digital converter (ADC) circuit, and an auxiliary circuit. The low temperature stability of charging circuit is test from −50 °C to 30 °C. Temperature correction algorithm is designed to improve the efficiency of the power supply system. The power generation energy of the power system was simulated based on the monthly average renewable energy data of Zhongshan Station. A case study was applied to examine the technical feasibility of the power system in Antarctica. The five-month application results indicate that the power system based on renewable energy can maintain stable performance and provide sufficient power for the observing system in low ambient temperatures. Therefore, this power system is an ideal solution to achieve an environmentally friendly and reliable energy supply in the polar regions.

scholarly journals Impact of compressed air energy storage system into diesel power plant with wind power penetration

2019 ◽  
Vol 9 (3) ◽  
pp. 1553
Author(s):  
Abdulla Ahmed ◽  
Tong Jiang
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Plant ◽  
Power System ◽  
Wind Power ◽  
Power Supply ◽  
Renewable Energy Sources ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage

<p>The wind energy plays an important role in power system because of its renewable, clean and free energy. However, the penetration of wind power (WP) into the power grid system (PGS) requires an efficient energy storage systems (ESS). compressed air energy storage (CAES) system is one of the most ESS technologies which can alleviate the intermittent nature of the renewable energy sources (RES). Nyala city power plant in Sudan has been chosen as a case study because the power supply by the existing power plant is expensive due to high costs for fuel transport and the reliability of power supply is low due to uncertain fuel provision. This paper presents a formulation of security-constrained unit commitment (SCUC) of diesel power plant (DPP) with the integration of CAES and PW. The optimization problem is modeled and coded in MATLAB which solved with solver GORUBI 8.0. The results show that the proposed model is suitable for integration of renewable energy sources (RES) into PGS with ESS and helpful in power system operation management.</p>

scholarly journals Supercapacitor energy storage systems for lighting systems with combined power supply

2021 ◽  
pp. 3-9
Author(s):  
D. V. Pekur ◽  
Yu. V. Kolomzarov ◽  
V. P. Kostilov ◽  
V. M. Sorokin ◽  
V. I. Kornaga ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Power Supply ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Photovoltaic Generation ◽  
Supercapacitor Energy Storage ◽  
Lighting Systems

Modern continuous lighting systems use powerful high-performance LEDs as light sources and an important task is to begin using alternative renewable energy sources for their power supply (including during the day). The simplest of the renewable energy sources is photovoltaic solar energy converter. However, solar photovoltaic generation depends significantly on many factors - geographical location, time of day, state of the atmosphere, time of year and the like. In addition, photovoltaic generation depends on the weather conditions and cloudiness, which makes it unstable and prone to change drastically (by an order of magnitude) during daylight hours. Therefore, an important element of the power system based on renewable energy sources is the system of accumulation of generated energy. The method of power stabilization using supercapacitors for systems with a significant change in power generation in the electrical power system is analyzed. The paper offers design principles of the power supply systems for powerful LEDs with supercapacitor energy storage devices intended to make the use of energy from sources with variable generation more efficient. The systems with supercapacitor-based drives, which allow to ensure stable operation of the lighting system when the power supply from an alternative source is absent or reduced, provide high safety and reliability, and have a significantly longer service life than battery-based energy storage systems.

scholarly journals A Study of a Standalone Renewable Energy System of the Chinese Zhongshan Station in Antarctica

2019 ◽  
Vol 9 (10) ◽  
pp. 1968 ◽  
Author(s):  
Yinke Dou ◽  
Guangyu Zuo ◽  
Xiaomin Chang ◽  
Yan Chen
Keyword(s):  
Renewable Energy ◽  
Low Temperature ◽  
Power System ◽  
Wind Turbine ◽  
Power Supply ◽  
Energy System ◽  
Zhongshan Station ◽  
Pv Array ◽  
Renewable Energy System

China has built four stations in Antarctica so far, and Zhongshan Station is the largest station among them. Continuous power supply for manned stations mainly relies on fuel. With the gradual increase in energy demand at the station and cost of fuel traffic from China to Zhongshan station in Antarctica, reducing fuel consumption and increasing green energy utilization are urgent problems. This research considers a standalone renewable energy system. The polar environments and renewable energy distribution of area of Zhongshan station are analyzed. The physical model, operation principle, and mathematical modeling of the proposed power system were designed. Low-temperature performance and state of charge (SOC) estimation method of the lead–acid battery were comprehensively tested and evaluated. A temperature control strategy was adopted to prevent the battery from low-temperature loss of the battery capacity. Energy management strategy of the power system was proposed by designing maximum power point tracking (MPPT) control strategies for wind turbine and PV array. The whole power system is broadly composed of a power generator (wind turbine and PV array), an uploading circuit, a three-phase rectifier bridge, an interleaved Buck circuit, a DC/DC conversion circuit, a switch circuit, a power supply circuit, an amplifier, a driver circuit, a voltage and current monitoring, a load, battery units and a control system. A case study in Antarctica was applied and can examine the technical feasibility of the proposed system. The results of the case study reveal that the scheme of standalone renewable energy system can satisfy the power demands of Zhongshan Station in normal operation.

scholarly journals Sizing Hybrid Energy Storage Systems for Distributed Power Systems under Multi-Time Scales

2018 ◽  
Vol 8 (9) ◽  
pp. 1453 ◽  
Author(s):  
Huanan Liu ◽  
Dezhi Li ◽  
Yuting Liu ◽  
Mingyu Dong ◽  
Xiangnan Liu ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Systems ◽  
Power System ◽  
Time Scales ◽  
Carbon Emissions ◽  
Storage Capacity ◽  
Rapid Development ◽  
Super Capacitor ◽  
Energy Storage Capacity

With the rapid development of industry, more fossil energy is consumed to generate electricity, which increases carbon emissions and aggravates the burden of environmental protection. To reduce carbon emissions, traditional centralized power generation networks are transforming into distributed renewable generation systems. However, the deployment of distributed generation systems can affect power system economy and stability. In this paper, under different time scales, system economy, stability, carbon emissions, and renewable energy fluctuation are comprehensively considered to optimize battery and super-capacitor installation capacity for an off-grid power system. After that, based on the genetic algorithm, this paper shows the optimal system operation strategy under the condition of the theoretical best energy storage capacity. Finally, the theoretical best capacity is tested under different renewable energy volatility rates. The simulation results show that by properly sizing the storage system’s capacity, although the average daily costs of the system can increase by 10%, the system’s carbon emissions also reduce by 42%. Additionally, the system peak valley gap reduces by 23.3%, and the renewable energy output’s fluctuation range and system loss of load probability are successfully limited in an allowable range. Lastly, it has less influence on the theoretical best energy storage capacity if the renewable energy volatility rate can be limited to within 10%.

scholarly journals Economical Electricity Home System using Solar

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Aisha Ajeerah Azahar ◽  
◽  
Nor Akmal Mohd Jamail ◽  
Amal Hayati Mat Isa ◽  
Fatin Nazirah Md Sani ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Renewable Energy ◽  
Solar System ◽  
Power Supply ◽  
Energy Efficient ◽  
Solar Panel ◽  
Floor Plan ◽  
Battery Storage ◽  
Matlab Software ◽  
Efficient System

Economical home system can be defined as one realization of home that have a cost-effective ideal by using specific set of technologies combined with the renewable energy as a power supply. This system has a highly advance for lighting, temperature control, socket and own power supply by using solar panel. This system is developed in this project and focused on B40 community that represents the bottom 40% of income earners and also this project becomes suitable for this community for getting an energy efficiency system. Due to the COVID-19, B40 households were reported to have lost their jobs causing financial hardship and had to face the issue of high electricity bills which are very burdensome for them at all in order to pay the cost electricity for monthly. The aim of the article is to design and simulate the solar power system including battery storage in suitable software for a residential house especially in B40 community home and also to analyze the potential of battery storage in order to store the energy from solar panel. Therefore, the economical electricity home system using solar energy for B40 community is proposed in this project for producing an energy efficient system at home. In addition, an electrical floor plan and floor plan of B40 community home is designed in the SketchUp software that using basic electrical equipment such as lighting, ceiling fan and socket. The system is developed by using the MATLAB software in order to produce the result of energy efficiency by using the renewable energy which is solar system and also battery storage. According to the data produced from the calculation of old bills and new bills, the energy consumptions are calculated and also be compared before and after using the renewable energy which is using solar system. The data obtained through calculation of maximum demand in new bill is used in the simulation of solar system in MATLAB software. The results obtained show that after using an energy-efficient load, the monthly new bill is around RM 27.79 which is around RM 10.75 less than the monthly old bill before using an energy-efficient load. It can be concluded that the use of renewable energy in B40 community home can save the energy and also money.

scholarly journals An extensive review of energy storage system for the residential renewable energy system

2020 ◽  
Vol 18 (1) ◽  
pp. 242
Author(s):  
M. S. A. Mustaza ◽  
M. A. M. Ariff ◽  
Sofia Najwa Ramli
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Storage System ◽  
Energy Condition ◽  
Energy System ◽  
Energy Storage System ◽  
Energy Utilization ◽  
Constant Current ◽  
Battery Management System

Energy storage system (ESS) plays a prominent role in renewable energy (RE) to overcome the intermittent of RE energy condition and improve energy utilization in the power system. However, ESS for residential applications requires specific and different configuration. Hence, this review paper aims to provide information for system builders to decide the best setup configuration of ESS for residential application. In this paper, the aim is to provide an insight into the critical elements of the energy storage technology for residential application. The update on ESS technology, battery chemistry, battery charging, and monitoring system and power inverter technology are reviewed. Then, the operation, the pro, and cons of each variant of these technologies are comprehensively studied. This paper suggested that the ESS for residential ESS requires NMC battery chemistry because it delivers an all-rounded performance as compared to other battery chemistries. The four-stages constant current (FCC) charging technique is recommended because of the fast charging capability and safer than other charging techniques reviewed. Next, the battery management system (BMS) is recommended to adapt in advance machine learning method to estimate the state of charge (SOC), state of health (SOH) and internal temperature (IT) to increase the safety and prolong the lifespan of the batteries. Finally, these recommendations and solutions aimed to improve the utilization of RE energy in power system, especially in residential ESS application and offer the best option that is available on the shelf for the residential ESS application in the future.

Thermo-Economic Analysis of a Photovoltaic-Fuel Cell Hybrid System With Energy Storage for CHP Production in Household Sector

2016 ◽  
Author(s):  
M. A. Ancona ◽  
M. Bianchi ◽  
A. De Pascale ◽  
F. Melino ◽  
A. Peretto ◽  
...  
Keyword(s):  
Energy Storage ◽  
Fuel Cell ◽  
Power System ◽  
Hybrid System ◽  
Proton Exchange ◽  
Test Facility ◽  
Small Scale ◽  
Optimal Size ◽  
Photovoltaic Array ◽  
Continuous Power

The penetration of renewable sources, particularly wind and solar, into the grid has been increasing in recent years. As a consequence, there have been serious concerns over reliable and safety operation of power systems. One possible solution, to improve grid integrity, is to integrate energy storage devices into power system network: storing energy produced in periods of low demand to later use, ensuring full exploitation of intermittent available sources. Focusing on photovoltaic energy system, energy storage is needed with the purpose of ensuring continuous power flow to minimize or to neglect electrical grid supply. A comprehensive study on a hybrid micro-CHP system based on photovoltaic panels using hydrogen as energy storage technologies has been performed. This study examines the feasibility of replacing electricity provided by the grid with a hybrid system to meet household demand. This paper is a part of an experimental and a theoretical study which is currently under development at University of Bologna where a test facility is under construction for the experimental characterization of a small scale cogenerative power system. This paper presents the theoretical results of a hybrid system performance simulations made of a photovoltaic array an electrolyzer with a H2 tank and a Proton Exchange Membrane fuel cell stack designed to satisfy typical household electrical demand. The performance of this system have been evaluated by the use of a calculation code, in-house developed by the University of Bologna. Results of the carried out parametric investigations identify photovoltaic and fuel cell systems’ optimal size in order to minimize the purchasing of electrical energy from the grid. Future activities will be the tuning of the software with the experimental results, in order to realize a code able to define the correct size of each sub-system, once the load profile of the utility is known or estimated.

Sign in / Sign up

Export Citation Format

Share Document