scholarly journals Impact of compressed air energy storage system into diesel power plant with wind power penetration

2019 ◽  
Vol 9 (3) ◽  
pp. 1553
Author(s):  
Abdulla Ahmed ◽  
Tong Jiang
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Plant ◽  
Power System ◽  
Wind Power ◽  
Power Supply ◽  
Renewable Energy Sources ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage

<p>The wind energy plays an important role in power system because of its renewable, clean and free energy. However, the penetration of wind power (WP) into the power grid system (PGS) requires an efficient energy storage systems (ESS). compressed air energy storage (CAES) system is one of the most ESS technologies which can alleviate the intermittent nature of the renewable energy sources (RES). Nyala city power plant in Sudan has been chosen as a case study because the power supply by the existing power plant is expensive due to high costs for fuel transport and the reliability of power supply is low due to uncertain fuel provision. This paper presents a formulation of security-constrained unit commitment (SCUC) of diesel power plant (DPP) with the integration of CAES and PW. The optimization problem is modeled and coded in MATLAB which solved with solver GORUBI 8.0. The results show that the proposed model is suitable for integration of renewable energy sources (RES) into PGS with ESS and helpful in power system operation management.</p>

Large-scale compressed air energy storage in porous media in a 100% renewable energy supply future

2021 ◽  
Author(s):  
Firdovsi Gasanzade ◽  
Fahim Sadat ◽  
Ilja Tuschy ◽  
Sebastian Bauer
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power Plant ◽  
Energy Supply ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Operation Conditions ◽  
The Future

&lt;p&gt;Compressed air energy storage (CAES) in porous formations is one option to compensate the expected fluctuations in energy supply in future energy systems with a 100% share of renewable energy sources. Mechanical energy is stored as pressurized air in a subsurface porous formation using off-peak power, and released during peak demand using a turbine for power generation. Depending on share and type of renewable energy sources in the future, different storage capacities and storage power rates will have to be satisfied to compensate fluctuating nature of the renewable power supply. Therefore, this study investigates scenarios for subsurface compressed air energy storage using four potential future energy system development pathways. Because for CAES subsurface processes and power generation are strongly linked via reservoir pressure and flow rates, coupled power plant and geostorage model has to be developed and employed to evaluate potential operation conditions for such a storage technique.&lt;/p&gt;&lt;p&gt;In this study, a diabatic CAES is designed, with a three-stage compression and a two-stage expansion with heat recuperator in the power plant and a porous formation as a storage formation with 20 m thickness in an anticline trap structure at a depth between 700 and 1500 m. A withdrawal rate of 115 MW and a total stored energy of up to 348 GWh per year are derived from the future energy system scenarios. Scenario simulations are carried out by coupling the open-source thermal engineering TESPy code and the multiphase-multicomponent ECLIPSE flow simulator using highly fluctuating load profiles with a time resolution of one hour. In addition to the diabatic CAES, two adiabatic concepts are considered for the same geostorage configuration.&lt;/p&gt;&lt;p&gt;Results show that nine vertical storage wells are sufficient to deliver the target air mass flow rates required by the power plant during 98% of the year. Flow rate limitation occurs due to bottom hole pressure limits either during the injection or the withdrawal phases, depending on the specific load profile of the future energy systems, as well as the prior operation conditions. Thus, our scenario simulation shows that one porous media CAES site can cover all expected load profiles and balance the expected offsets between energy demand and energy supply up to the GWh scale. Balancing of the energy system at the national level can be achieved by up-scaling of the results obtained in this study.&lt;/p&gt;

Design of a Modular Solid-Based Thermal Energy Storage for a Hybrid Compressed Air Energy Storage System

2016 ◽  
Author(s):  
Reza Baghaei Lakeh ◽  
Ian C. Villazana ◽  
Sammy Houssainy ◽  
Kevin R. Anderson ◽  
H. Pirouz Kavehpour
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Computational Study ◽  
Power Grid ◽  
Renewable Energy Sources ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage

The share of renewable energy sources in the power grid is showing an increasing trend world-wide. Most of the renewable energy sources are intermittent and have generation peaks that do not correlate with peak demand. The stability of the power grid is highly dependent on the balance between power generation and demand. Compressed Air Energy Storage (CAES) systems have been utilized to receive and store the electrical energy from the grid during off-peak hours and play the role of an auxiliary power plant during peak hours. Using Thermal Energy Storage (TES) systems with CAES technology is shown to increase the efficiency and reduce the cost of generated power. In this study, a modular solid-based TES system is designed to store thermal energy converted from grid power. The TES system stores the energy in the form of internal energy of the storage medium up to 900 K. A three-dimensional computational study using commercial software (ANSYS Fluent) was completed to test the performance of the modular design of the TES. It was shown that solid-state TES, using conventional concrete and an array of circular fins with embedded heaters, can be used for storing heat for a high temperature hybrid CAES (HTH-CAES) system.

scholarly journals Use of an Under-Water Compressed Air Energy Storage (UWCAES) to Fully Power the Sicily Region (Italy) With Renewable Energy: A Case Study

2021 ◽  
Vol 7 ◽  
Author(s):  
Francesco Antonio Tiano ◽  
Gianfranco Rizzo
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage ◽  
High Concentration ◽  
Renewable Sources

The high concentration of CO2 in the atmosphere and the increase in sea and land temperatures make the use of renewable energy sources increasingly urgent. To overcome the problem of non-programmability of renewable sources, this study analyzes an energy storage system consisting of under water compressed air energy storage (UWCAES). A case study for fully power the Sicily region (Italy) with renewable energy source (wind and photovoltaic) is presented. From the real annual capacity values of the renewable plants installed in Sicily, a sizing of both the energy production and the storage system and its auxiliary services is evaluated. The optimization of the operation of the system as a whole, modeled with mathematical models already validated in previous studies, is obtained through dynamic programming. The electricity consumed annually by the region, equal to 19048.4 GWh, can be entirely satisfied by renewable energy sources. A sizing of plants powered by renewable sources for a nominal power of 15, 000 MW equally divided between photovoltaic and wind power is considered. The underwater air storage system has a maximum volume of 2.1 × 108 m3, while the compression and generation units have a total nominal power of 6, 900 and 3, 100 MW, respectively. The study finally presents a sensitivity analysis for the evaluation of the effects of the variation of the power produced by renewable energy sources and of Sicily energy consumption. The results show that carbon-free feeding is possible and that all the boundary conditions on the operation of the system can be met.

scholarly journals Supercapacitor energy storage systems for lighting systems with combined power supply

2021 ◽  
pp. 3-9
Author(s):  
D. V. Pekur ◽  
Yu. V. Kolomzarov ◽  
V. P. Kostilov ◽  
V. M. Sorokin ◽  
V. I. Kornaga ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Power System ◽  
Power Supply ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Photovoltaic Generation ◽  
Supercapacitor Energy Storage ◽  
Lighting Systems

Modern continuous lighting systems use powerful high-performance LEDs as light sources and an important task is to begin using alternative renewable energy sources for their power supply (including during the day). The simplest of the renewable energy sources is photovoltaic solar energy converter. However, solar photovoltaic generation depends significantly on many factors - geographical location, time of day, state of the atmosphere, time of year and the like. In addition, photovoltaic generation depends on the weather conditions and cloudiness, which makes it unstable and prone to change drastically (by an order of magnitude) during daylight hours. Therefore, an important element of the power system based on renewable energy sources is the system of accumulation of generated energy. The method of power stabilization using supercapacitors for systems with a significant change in power generation in the electrical power system is analyzed. The paper offers design principles of the power supply systems for powerful LEDs with supercapacitor energy storage devices intended to make the use of energy from sources with variable generation more efficient. The systems with supercapacitor-based drives, which allow to ensure stable operation of the lighting system when the power supply from an alternative source is absent or reduced, provide high safety and reliability, and have a significantly longer service life than battery-based energy storage systems.

An Electrical Microgrid: Integration of Solar Panels, Compressed Air Storage, and a Micro-Cap Gas Turbine

2014 ◽  
Author(s):  
Shreyas M. Patel ◽  
Paul T. Freeman ◽  
John R. Wagner
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Natural Gas ◽  
Renewable Energy Sources ◽  
Average Power ◽  
Piston Compressor ◽  
Compressed Air ◽  
Energy Sources ◽  
Similar Amount ◽  
Compressed Air Energy Storage

Non-renewable energy sources such as coal, oil, and natural gas are being consumed at a brisk pace while greenhouse gases contribute to atmospheric pollution. A global shift is underway toward the inclusion of renewable energy sources, such as solar and wind, for generating electrical and mechanical power. To meet this emerging demand, a solar based electrical microgrid study is underway at Clemson University. Solar energy is harvested from photovoltaic panels capable of producing 15 kW of DC power. Compressed air energy storage has been evaluated using the generated solar power to operate an electric motor driven piston compressor. The compressed air is then stored under pressure and supplied to a natural gas driven Capstone C30 MicroTurbine with attached electric power generator. The compressed air facilitates the turbine’s rotor-blade operated compression stage resulting in direct energy savings. A series of mathematical models have been developed. To evaluate the feasibility and energy efficiency improvements, the experimental and simulation results indicated that 127.8 watts of peak power was delivered at 17.5 Volts and 7.3 Amps from each solar panel. The average power generation over a 24-hour time period from 115 panels was 15 kW DC or 6 kW of AC power at 208/240 VAC and 25 Amps from the inverter. This electrical power could run a 5.2 kW reciprocating compressor for approximately 5 hours storing 1,108 kg of air at a 1.2 MPa pressure. A case study indicated that the microturbine, when operated without compressed air storage, consumed 11.2 kg of gaseous propane for 30 kW·hr of energy generation. In contrast, the microturbine operated in conjunction with solar supplied air storage could generate 50.8 kW·hr of electrical energy for a similar amount of fuel consumption. The study indicated an 8.1% efficiency improvement in energy generated by the system which utilized compressed air energy storage over the traditional approach.

scholarly journals Salt Cavern Exergy Storage Capacity Potential of UK Massively Bedded Halites, Using Compressed Air Energy Storage (CAES)

2021 ◽  
Vol 11 (11) ◽  
pp. 4728
Author(s):  
David Evans ◽  
Daniel Parkes ◽  
Mark Dooner ◽  
Paul Williamson ◽  
John Williams ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Large Scale ◽  
Storage Capacity ◽  
Renewable Energy Sources ◽  
Compressed Air ◽  
Energy Sources ◽  
Compressed Air Energy Storage ◽  
The Uk ◽  
Salt Caverns

The increasing integration of large-scale electricity generation from renewable energy sources in the grid requires support through cheap, reliable, and accessible bulk energy storage technologies, delivering large amounts of electricity both quickly and over extended periods. Compressed air energy storage (CAES) represents such a storage option, with three commercial facilities using salt caverns for storage operational in Germany, the US, and Canada, with CAES now being actively considered in many countries. Massively bedded halite deposits exist in the UK and already host, or are considered for, solution-mined underground gas storage (UGS) caverns. We have assessed those with proven UGS potential for CAES purposes, using a tool developed during the EPSRC-funded IMAGES project, equations for which were validated using operational data from the Huntorf CAES plant. From a calculated total theoretical ‘static’ (one-fill) storage capacity exceeding that of UK electricity demand of ≈300 TWh in 2018, filtering of results suggests a minimum of several tens of TWh exergy storage in salt caverns, which when co-located with renewable energy sources, or connected to the grid for off-peak electricity, offers significant storage contributions to support the UK electricity grid and decarbonisation efforts.

Sign in / Sign up

Export Citation Format

Share Document