scholarly journals Classification of Pulmonary CT Images by Using Hybrid 3D-Deep Convolutional Neural Network Architecture

2019 ◽  
Vol 9 (5) ◽  
pp. 940 ◽  
Author(s):  
Huseyin Polat ◽  
Homay Danaei Mehr
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Lung Cancer ◽  
Feature Extraction ◽  
Extraction Methods ◽  
Ct Images ◽  
Learning Methods ◽  
Machine Learning Methods ◽  
Diagnosis Of Lung Cancer ◽  
3D Cnn

Lung cancer is the most common cause of cancer-related deaths worldwide. Hence, the survival rate of patients can be increased by early diagnosis. Recently, machine learning methods on Computed Tomography (CT) images have been used in the diagnosis of lung cancer to accelerate the diagnosis process and assist physicians. However, in conventional machine learning techniques, using handcrafted feature extraction methods on CT images are complicated processes. Hence, deep learning as an effective area of machine learning methods by using automatic feature extraction methods could minimize the process of feature extraction. In this study, two Convolutional Neural Network (CNN)-based models were proposed as deep learning methods to diagnose lung cancer on lung CT images. To investigate the performance of the two proposed models (Straight 3D-CNN with conventional softmax and hybrid 3D-CNN with Radial Basis Function (RBF)-based SVM), the altered models of two-well known CNN architectures (3D-AlexNet and 3D-GoogleNet) were considered. Experimental results showed that the performance of the two proposed models surpassed 3D-AlexNet and 3D-GoogleNet. Furthermore, the proposed hybrid 3D-CNN with SVM achieved more satisfying results (91.81%, 88.53% and 91.91% for accuracy rate, sensitivity and precision respectively) compared to straight 3D-CNN with softmax in the diagnosis of lung cancer.

Hand Gesture Recognition Based on sEMG Signal and Convolutional Neural Network

2021 ◽  
pp. 2151012
Author(s):  
Ziyi Su ◽  
Handong Liu ◽  
Jinwu Qian ◽  
Zhen Zhang ◽  
Lunwei Zhang
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Feature Extraction ◽  
Convolutional Neural Network ◽  
Gesture Recognition ◽  
Hand Gestures ◽  
Learning Methods ◽  
Semg Signal ◽  
Machine Learning Methods ◽  
Semg Signals

Recently, deep learning has become a promising technique for constructing gesture recognition classifiers from surface electromyography (sEMG) signals in human–computer interaction. In this paper, we propose a gesture recognition method with sEMG signals based on a deep multi-parallel convolutional neural network (CNN), which solves the problem that traditional machine learning methods may lose too much useful information during feature extraction. CNNs provide an efficient way to constrain the complexity of feedforward neural networks by weight sharing and restriction to local connections. Sophisticated feature extraction is to be avoided and hand gestures are to be classified directly. A multi-parallel and multi-convolution layer convolution structure is proposed to classify hand gestures. Experiment results show that in comparison with five traditional machine learning methods, the proposed method could achieve higher accuracy.

scholarly journals Integrating Machine/Deep Learning Methods and Filtering Techniques for Reliable Mineral Phase Segmentation of 3D X-ray Computed Tomography Images

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4595
Author(s):  
Parisa Asadi ◽  
Lauren E. Beckingham
Keyword(s):  
Machine Learning ◽  
Deep Learning ◽  
Random Forest ◽  
Ct Images ◽  
Ct Imaging ◽  
Learning Method ◽  
Learning Methods ◽  
X Ray ◽  
Machine Learning Methods ◽  
Filtering Techniques

X-ray CT imaging provides a 3D view of a sample and is a powerful tool for investigating the internal features of porous rock. Reliable phase segmentation in these images is highly necessary but, like any other digital rock imaging technique, is time-consuming, labor-intensive, and subjective. Combining 3D X-ray CT imaging with machine learning methods that can simultaneously consider several extracted features in addition to color attenuation, is a promising and powerful method for reliable phase segmentation. Machine learning-based phase segmentation of X-ray CT images enables faster data collection and interpretation than traditional methods. This study investigates the performance of several filtering techniques with three machine learning methods and a deep learning method to assess the potential for reliable feature extraction and pixel-level phase segmentation of X-ray CT images. Features were first extracted from images using well-known filters and from the second convolutional layer of the pre-trained VGG16 architecture. Then, K-means clustering, Random Forest, and Feed Forward Artificial Neural Network methods, as well as the modified U-Net model, were applied to the extracted input features. The models’ performances were then compared and contrasted to determine the influence of the machine learning method and input features on reliable phase segmentation. The results showed considering more dimensionality has promising results and all classification algorithms result in high accuracy ranging from 0.87 to 0.94. Feature-based Random Forest demonstrated the best performance among the machine learning models, with an accuracy of 0.88 for Mancos and 0.94 for Marcellus. The U-Net model with the linear combination of focal and dice loss also performed well with an accuracy of 0.91 and 0.93 for Mancos and Marcellus, respectively. In general, considering more features provided promising and reliable segmentation results that are valuable for analyzing the composition of dense samples, such as shales, which are significant unconventional reservoirs in oil recovery.

scholarly journals Possibility of Autonomous Estimation of Shiba Goat’s Estrus and Non-Estrus Behavior by Machine Learning Methods

Animals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 771
Author(s):  
Toshiya Arakawa
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Random Forest ◽  
Markov Models ◽  
Tracking System ◽  
Video Tracking ◽  
Training Data ◽  
Support Vector ◽  
Learning Methods ◽  
Machine Learning Methods

Mammalian behavior is typically monitored by observation. However, direct observation requires a substantial amount of effort and time, if the number of mammals to be observed is sufficiently large or if the observation is conducted for a prolonged period. In this study, machine learning methods as hidden Markov models (HMMs), random forests, support vector machines (SVMs), and neural networks, were applied to detect and estimate whether a goat is in estrus based on the goat’s behavior; thus, the adequacy of the method was verified. Goat’s tracking data was obtained using a video tracking system and used to estimate whether they, which are in “estrus” or “non-estrus”, were in either states: “approaching the male”, or “standing near the male”. Totally, the PC of random forest seems to be the highest. However, The percentage concordance (PC) value besides the goats whose data were used for training data sets is relatively low. It is suggested that random forest tend to over-fit to training data. Besides random forest, the PC of HMMs and SVMs is high. However, considering the calculation time and HMM’s advantage in that it is a time series model, HMM is better method. The PC of neural network is totally low, however, if the more goat’s data were acquired, neural network would be an adequate method for estimation.

Landslide susceptibility mapping based on convolutional neural network and conventional machine learning methods

2021 ◽  
Author(s):  
Rui Liu ◽  
Xin Yang ◽  
Chong Xu ◽  
Luyao Li ◽  
Xiangqiang Zeng
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Convolutional Neural Network ◽  
Landslide Susceptibility ◽  
Susceptibility Mapping ◽  
Landslide Susceptibility Mapping ◽  
Support Vector ◽  
Learning Methods ◽  
Machine Learning Methods ◽  
Conventional Machine

Abstract Landslide susceptibility mapping (LSM) is a useful tool to estimate the probability of landslide occurrence, providing a scientific basis for natural hazards prevention, land use planning, and economic development in landslide-prone areas. To date, a large number of machine learning methods have been applied to LSM, and recently the advanced Convolutional Neural Network (CNN) has been gradually adopted to enhance the prediction accuracy of LSM. The objective of this study is to introduce a CNN based model in LSM and systematically compare its overall performance with the conventional machine learning models of random forest, logistic regression, and support vector machine. Herein, we selected the Jiuzhaigou region in Sichuan Province, China as the study area. A total number of 710 landslides and 12 predisposing factors were stacked to form spatial datasets for LSM. The ROC analysis and several statistical metrics, such as accuracy, root mean square error (RMSE), Kappa coefficient, sensitivity, and specificity were used to evaluate the performance of the models in the training and validation datasets. Finally, the trained models were calculated and the landslide susceptibility zones were mapped. Results suggest that both CNN and conventional machine-learning based models have a satisfactory performance (AUC: 85.72% − 90.17%). The CNN based model exhibits excellent good-of-fit and prediction capability, and achieves the highest performance (AUC: 90.17%) but also significantly reduces the salt-of-pepper effect, which indicates its great potential of application to LSM.

Detecting Items with the Biggest Weight Based on Neural Network and Machine Learning Methods

2020 ◽  
pp. 383-396
Author(s):  
Vitaliy Danylyk ◽  
Victoria Vysotska ◽  
Vasyl Lytvyn ◽  
Svitlana Vyshemyrska ◽  
Iryna Lurie ◽  
...  
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Learning Methods ◽  
Machine Learning Methods

scholarly journals A Comparison of Machine Learning Methods in a High-Dimensional Classification Problem

2014 ◽  
Vol 5 (3) ◽  
pp. 82-96 ◽  
Author(s):  
Marijana Zekić-Sušac ◽  
Sanja Pfeifer ◽  
Nataša Šarlija
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Classification Accuracy ◽  
Classification Problem ◽  
High Dimensional ◽  
Nearest Neighbour ◽  
Learning Methods ◽  
Machine Learning Methods ◽  
Dimensional Classification ◽  
Artificial Neural

Abstract Background: Large-dimensional data modelling often relies on variable reduction methods in the pre-processing and in the post-processing stage. However, such a reduction usually provides less information and yields a lower accuracy of the model. Objectives: The aim of this paper is to assess the high-dimensional classification problem of recognizing entrepreneurial intentions of students by machine learning methods. Methods/Approach: Four methods were tested: artificial neural networks, CART classification trees, support vector machines, and k-nearest neighbour on the same dataset in order to compare their efficiency in the sense of classification accuracy. The performance of each method was compared on ten subsamples in a 10-fold cross-validation procedure in order to assess computing sensitivity and specificity of each model. Results: The artificial neural network model based on multilayer perceptron yielded a higher classification rate than the models produced by other methods. The pairwise t-test showed a statistical significance between the artificial neural network and the k-nearest neighbour model, while the difference among other methods was not statistically significant. Conclusions: Tested machine learning methods are able to learn fast and achieve high classification accuracy. However, further advancement can be assured by testing a few additional methodological refinements in machine learning methods.

Automatic segmentation of lung tumors on CT images based on a 2D & 3D hybrid convolutional neural network

2021 ◽  
pp. 20210038
Author(s):  
Wutian Gan ◽  
Hao Wang ◽  
Hengle Gu ◽  
Yanhua Duan ◽  
Yan Shao ◽  
...  
Keyword(s):  
Neural Network ◽  
Lung Cancer ◽  
Lung Tumor ◽  
Ct Images ◽  
Hybrid Network ◽  
Evaluation Metrics ◽  
Tumor Segmentation ◽  
Tumor Delineation ◽  
3D Cnn ◽  
The Individual

Objective: A stable and accurate automatic tumor delineation method has been developed to facilitate the intelligent design of lung cancer radiotherapy process. The purpose of this paper is to introduce an automatic tumor segmentation network for lung cancer on CT images based on deep learning. Methods: In this paper, a hybrid convolution neural network (CNN) combining 2D CNN and 3D CNN was implemented for the automatic lung tumor delineation using CT images. 3D CNN used V-Net model for the extraction of tumor context information from CT sequence images. 2D CNN used an encoder–decoder structure based on dense connection scheme, which could expand information flow and promote feature propagation. Next, 2D features and 3D features were fused through a hybrid module. Meanwhile, the hybrid CNN was compared with the individual 3D CNN and 2D CNN, and three evaluation metrics, Dice, Jaccard and Hausdorff distance (HD), were used for quantitative evaluation. The relationship between the segmentation performance of hybrid network and the GTV volume size was also explored. Results: The newly introduced hybrid CNN was trained and tested on a dataset of 260 cases, and could achieve a median value of 0.73, with mean and stand deviation of 0.72 ± 0.10 for the Dice metric, 0.58 ± 0.13 and 21.73 ± 13.30 mm for the Jaccard and HD metrics, respectively. The hybrid network significantly outperformed the individual 3D CNN and 2D CNN in the three examined evaluation metrics (p < 0.001). A larger GTV present a higher value for the Dice metric, but its delineation at the tumor boundary is unstable. Conclusions: The implemented hybrid CNN was able to achieve good lung tumor segmentation performance on CT images. Advances in knowledge: The hybrid CNN has valuable prospect with the ability to segment lung tumor.

Sign in / Sign up

Export Citation Format

Share Document