scholarly journals Construction Waste Audit in the Framework of Sustainable Waste Management in Construction Projects—Case Study

Buildings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 61
Author(s):  
Marcela Spišáková ◽  
Peter Mésároš ◽  
Tomáš Mandičák

The issue of sustainability has long been the subject of interest in architecture engineering and the construction sector. All three aspects of sustainability—economic, environmental, and social—can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore, it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Research studies show that one of the main barriers to insufficient CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of European Union’s (EU) environmental priorities. The aim of the article was to confirm the economic potential of construction and demolition waste audit processing through a case study. A pre-demolition waste audit was processed for an unused shopping center building in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of the recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which would also increase the sustainability of construction projects. Additionally, the cost parameters of selected waste disposal methods could be another dimension of building information modeling.

Author(s):  
Marcela Spišáková ◽  
Peter Mésároš ◽  
Tomáš Mandičák

The issue of sustainability has long been the subject of interest of the architecture engineering and construction sector. All three aspects of sustainability - economic, environmental and social - can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Researches have shown that one of the main barriers to insufficiency CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of the EU's environmental priorities. Aim of the article is to confirm the economic potential of construction and demolition waste audit processing through case study. A pre-demolition waste audit has been processed for unused building of shopping center in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which will also increase the sustainability of construction projects. In addition, the cost parameters of selected waste disposal methods could be another dimension of building information modelling.


2020 ◽  
Vol 12 (4) ◽  
pp. 1672
Author(s):  
Zhijia You ◽  
Chen Wu ◽  
Lianqiong Zheng ◽  
Lingjun Feng

China is in a development period of urbanization construction, while its environment is threatened by an increasing amount of construction and demolition (C&D) waste. Due to the excessive pursuit of profits and a general lack of environmental awareness of stakeholders, illegal behaviors such as illegal dumping universally exist in the waste disposal process. Meanwhile, supervision departments face many challenges in collaborative management and decision-making, which lead to inefficiencies in C&D waste supervision and management in China. To address the above challenges, we propose an informatization scheme integrating multiple technologies, which will contribute to real-time monitoring of illegal behaviors in the waste disposal process, accurate data collection for evaluating the performance of stakeholders, and the enhancement of the collaboration between supervisory departments. A case study of the Ningbo Construction Waste Transportation Supervision System is introduced to verify the feasibility and effectiveness of the proposed scheme; results show that the total number of illegal cases has decreased from 510 to 89 per year since the system was put into operation.


2020 ◽  
Vol 9 (19) ◽  
Author(s):  
Daniela Carnasciali de Andrade Mann ◽  
André Nagalli ◽  
Karina Querne De Carvalho

Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasil há mais de uma década. O intuito dessa gestão é amenizar os impactos ambientais decorrentes do gerenciamento indevido desses resíduos. O objetivo do presente trabalho é investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil no município de Curitiba. Para tal, elaborou-se uma lista de verificação baseada nas normas em vigor e em alguns modelos de certificações ambientais, como: LEED, AQUA, CASBEE, BREAM e HQE. 24 obras de edifícios residenciais e comerciais foram  visitadas — com ou sem certificação ambiental. Essa lista de verificação foi aplicada nas construções, para realizar um diagnóstico do setor. Apesar da gestão de resíduos ser obrigatória e restritiva à obtenção dos certificados de conclusão de obra, os resultados da pesquisa demonstraram que há problemas na segregação, acondicionamento e transporte dos resíduos. Entretanto, a falta de conscientização e a aparente conformidade documental não se traduz em efetivo gerenciamento dos RCC. Palavras-chave: Resíduos de construção e demolição. Gestão de resíduos. Resíduos sólidos. Auditorias ambientais. Abstract Standards related to the management of Construction Waste (CW) have been in force in Brazil for more than a decade. The goal of this management is to alleviate the environmental impacts resulting from the poor management of these wastes. The objective of this work is to investigate the technical and legal compliance of construction waste management systems in the city of Curitiba. To this end, a checklist was drawn up based on current standards and on some models of environmental certifications, such as: LEED, AQUA, CASBEE, BREAM and HQE. 24 works of residential and commercial buildings were visited — with or without environmental certification.  A checklist was applied, in these buildings, to promote a diagnosis of the sector. Although waste management is mandatory and restrictive to obtain building completion certificates, the research results showed that there are problems in the segregation, packaging and transport of waste. However, the lack of awareness and the apparent documentary compliance does not translate into effective management of the CW. Keywords:  Construction and demolition waste. Waste management. Solid waste. Environmental audits. Resumen Normas relativas a la gestión de Residuos Sólidos de Construcción Civil (RCC) están vigentes en Brasil hace más de una década. La intención de esa gestión es amenizar los impactos ambientales producidos por la gestión inadecuada de esos residuos. El objetivo de este trabajo es investigar la conformidad técnica y legal de sistemas de gestión de residuos de la construcción civil en el municipio de Curitiba. Para ello, se elaboró una lista de cotejo basada en las normas vigentes y en algunos modelos de certificaciones ambientales como: LEED, AQUA, CASBEE, BREAM y HQE. Se visitaron 24 obras de edificios residenciales y comerciales — con o sin permiso ambiental. Se aplicó esa lista de cotejo en las construcciones, para realizar un diagnóstico des sector. Aunque la gestión de residuos sea obligatoria y restrictiva para la obtención de las certificaciones de conclusión de obra, los resultados de la investigación demostraron que hay problemas en la segregación, acondicionamiento y trasporte de los residuos. Sin embargo, la falta de conciencia y la aparente conformidad en materia de documentos no se traduce en una gestión eficiente de los RCC. Palabras-clave: Residuos de construcción y demolición. Gestión de residuos. Residuos sólidos. Auditorías ambientales.


2019 ◽  
Vol 8 (2S11) ◽  
pp. 2642-2644

The rules and regulations on waste management in the construction and demolition sector are analyzed corresponding to the present scenario of C&DW in India. C&D waste from construction sites has emerged as a significant threat to India because of its severe footprint on the environment. Vast quantities of construction waste will have unfavorable consequences on the surroundings if they are not properly managed. Therefore it is necessary to manage the development of C&DW by the experts within the construction industry. The approach represented is specialized in rules and regulations on waste management so that the environmental impact of construction activities can be minimized.


2016 ◽  
Vol 6 (6) ◽  
pp. 1249-1252 ◽  
Author(s):  
B. Rouhi Broujeni ◽  
G. A. Omrani ◽  
R. Naghavi ◽  
S. S. Afraseyabi

Increasing building construction raises concerns about construction and demolition (C&D) waste management. To assess this issue the building components, the collection schemes, their recycling and disposal should be investigated. In order to manage C&D wastes, paying attention to how this kind of wastes is disposed is imperative for their correct identification. Inattention, lack of organization and proper transport and sanitary disposal of construction and demolition waste lead to problems such as accumulation of construction waste in the streets. However, more than 90 percent of the potential for recycling and re-using as raw materials is provided. Environmental Protection Agency (EPA) has classified C&D wastes into three categories: non-dangerous waste, hazardous wastes and semi-hazardous wastes. Currently in Tehran, an average of about 50,000 tons per day of construction and demolition wastes are produced from which over 30,000 tons per day are dumped in landfills. According to this research more than 57% of these wastes are placed in the first category (non-dangerous waste) and have the potential for being recycled and reused. On the other hand, items that are placed in the second category shall be managed based on the existing laws. This article provides some management solutions including proposing methods for collecting and reusing construction waste in accordance with current market needs in Iran.


2020 ◽  
Vol 38 (4) ◽  
pp. 460-471 ◽  
Author(s):  
John N. Hahladakis ◽  
Phil Purnell ◽  
Hareb Mohammed S.J. Aljabri

Rapid industrial development, mega construction projects and increased immigration are some of the reasons that the State of Qatar has recently generated an unprecedented amount of construction and demolition (C&D) waste in the country. The State is racing towards the Fédération Internationale de Football Association World Cup 2022, a fact that requires additional construction, for which it is expected to increase its rate of waste generation. Compared to other regions, there are relatively few studies in the literature that report on the C&D waste management issues of Qatar. The present work begins to address this gap by providing insights into the current state of C&D waste management practices in Qatar and by providing a mini-review on the benefits of using recycled aggregates which have only recently been allowed locally by Qatar Construction Standards. A Strengths, Weaknesses, Opportunities, and Threats analysis has been implemented, using data and information from various sources including governmental reports, industries, local waste management companies, as well as reported interviews with relevant stakeholders. Finally, several strategies were proposed and developed that could potentially be implemented by stakeholders and decision-makers, so as to improve the current status by encouraging more sustainable and viable practices.


Sign in / Sign up

Export Citation Format

Share Document