scholarly journals Where Are the tpy Embraces in [Zn{4′-(EtO)2OPC6H4tpy}2][CF3SO3]2?

Crystals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 461 ◽  
Author(s):  
Davood Zare ◽  
Alessandro Prescimone ◽  
Edwin C. Constable ◽  
Catherine E. Housecroft

In this paper, the bromo- and phosphonate-ester-functionalized complexes [Zn(1)2][CF3SO3]2 and [Zn(2)2][CF3SO3]2 (1 = 4′-(4-bromophenyl)-2,2′:6′,2″-terpyridine, 2 = diethyl (4-([2,2′:6′,2″-terpyridin]-4′-yl)phenyl)phosphonate) are reported. The complexes have been characterized by electrospray mass spectrometry, IR and absorption spectroscopies, and multinuclear NMR spectroscopy. The single-crystal structures of [Zn(1)2][CF3SO3]2.MeCN.1/2Et2O and [Zn(2)2][CF3SO3]2 have been determined and they confirm {Zn(tpy)2}2+ cores (tpy = 2,2′:6′,2″-terpyridine). Ongoing from X = Br to P(O)(OEt)2, the {Zn(4′-XC6H4tpy)2}2+ unit exhibits significant “bowing” of the backbone, which is associated with changes in packing interactions. The [Zn(1)2]2+ cations engage in head-to-tail 4′-Phtpy...4′-Phtpy embraces with efficient pyridine...phenylene π-stacking interactions. The [Zn(2)2]2+ cations pack with one of the two ligands involved in pyridine...pyridine π-stacking; steric hindrance between one C6H4PO(OEt)2 group and an adjacent pair of π-stacked pyridine rings results in distortion of backbone of the ligand. This report is the first crystallographic determination of a salt of a homoleptic [M{4′-(RO)2OPC6H4tpy}2]n+ cation.

Inorganics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 54
Author(s):  
Giacomo Manfroni ◽  
Simona S. Capomolla ◽  
Alessandro Prescimone ◽  
Edwin C. Constable ◽  
Catherine E. Housecroft

The isomers 4′-(4-(trifluoromethyl)phenyl)-4,2′:6′,4″-terpyridine (1), 4′-(3-(trifluoromethyl)phenyl)-4,2′:6′,4″-terpyridine (2), 4′-(4-(trifluoromethyl)phenyl)-3,2′:6′,3″-terpyridine (3), and 4′-(3-(trifluoromethyl)phenyl)-3,2′:6′,3″-terpyridine (4) have been prepared and characterized. The single crystal structures of 1 and 2 were determined. The 1D-polymers [Cu2(hfacac)4(1)2]n.2nC6H4Cl2 (Hhfacac = 1,1,1,5,5,5-hexafluoropentane-2,4-dione), [Cu(hfacac)2(2)]n.2nC6H5Me, [Cu2(hfacac)4(3)2]n.nC6H4Cl2, [Cu2(hfacac)4(3)2]n.nC6H5Cl, and [Cu(hfacac)2(4)]n.nC6H5Cl have been formed by reactions of 1, 2, 3 and 4 with [Cu(hfacac)2].H2O under conditions of crystal growth by layering and four of these coordination polymers have been formed on a preparative scale. [Cu2(hfacac)4(1)2]n.2nC6H4Cl2 and [Cu(hfacac)2(2)]n.2nC6H5Me are zig-zag chains and the different substitution position of the CF3 group in 1 and 2 does not affect this motif. Packing of the polymer chains is governed mainly by C–F...F–C contacts, and there are no inter-polymer π-stacking interactions. The conformation of the 3,2′:6′,3″-tpy unit in [Cu2(hfacac)4(3)2]n.nC6H4Cl2 and [Cu(hfacac)2(4)]n.nC6H5Cl differs, leading to different structural motifs in the 1D-polymer backbones. In [Cu(hfacac)2(4)]n.nC6H5Cl, the peripheral 3-CF3C6H4 unit is accommodated in a pocket between two {Cu(hfacac)2} units and engages in four C–Hphenyl...F–Chfacac contacts which lock the phenylpyridine unit in a near planar conformation. In [Cu2(hfacac)4(3)2]n.nC6H4Cl2 and [Cu(hfacac)2(4)]n.nC6H5Cl, π-stacking interactions between 4′-trifluoromethylphenyl-3,2′:6′,3″-tpy domains are key packing interactions, and this contrasts with the packing of polymers incorporating 1 and 2. We use powder X-ray diffraction to demonstrate that the assemblies of the coordination polymers are reproducible, and that a switch from a 4,2′:6′,4″- to 3,2′:6′,3″-tpy metal-binding unit is accompanied by a change from dominant C–F...F–C and C–F...H–C contacts to π-stacking of arene domains between ligands 3 or 4.


Chemistry ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 182-198
Author(s):  
Dalila Rocco ◽  
Samantha Novak ◽  
Alessandro Prescimone ◽  
Edwin C. Constable ◽  
Catherine E. Housecroft

We report the preparation and characterization of 4′-([1,1′-biphenyl]-4-yl)-3,2′:6′,3″-terpyridine (1), 4′-(4′-fluoro-[1,1′-biphenyl]-4-yl)-3,2′:6′,3″-terpyridine (2), 4′-(4′-chloro-[1,1′-biphenyl]-4-yl)-3,2′:6′,3″-terpyridine (3), 4′-(4′-bromo-[1,1′-biphenyl]-4-yl)-3,2′:6′,3″-terpyridine (4), and 4′-(4′-methyl-[1,1′-biphenyl]-4-yl)-3,2′:6′,3″-terpyridine (5), and their reactions with copper(II) acetate. Single-crystal structures of the [Cu2(μ-OAc)4L]n 1D-coordination polymers with L = 1–5 have been determined, and powder X-ray diffraction confirms that the single crystal structures are representative of the bulk samples. [Cu2(μ-OAc)4(1)]n and [Cu2(μ-OAc)4(2)]n are isostructural, and zigzag polymer chains are present which engage in π-stacking interactions between [1,1′-biphenyl]pyridine units. 1D-chains nest into one another to give 2D-sheets; replacing the peripheral H in 1 by an F substituent in 2 has no effect on the solid-state structure, indicating that bifurcated contacts (H...H for 1 or H...F for 2) are only secondary packing interactions. Upon going from [Cu2(μ-OAc)4(1)]n and [Cu2(μ-OAc)4(2)]n to [Cu2(μ-OAc)4(3)]n, [Cu2(μ-OAc)4(4)]n, and [Cu2(μ-OAc)4(5)]n·nMeOH, the increased steric demands of the Cl, Br, or Me substituent induces a switch in the conformation of the 3,2′:6′,3″-tpy metal-binding domain, and a concomitant change in dominant packing interactions to py–py and py–biphenyl face-to-face π-stacking. The study underlines how the 3,2′:6′,3″-tpy domain can adapt to different steric demands of substituents through its conformational flexibility.


FEBS Letters ◽  
1996 ◽  
Vol 389 (3) ◽  
pp. 309-313 ◽  
Author(s):  
Monica Di Luca ◽  
Lucia Pastorino ◽  
Vittorio Raverdino ◽  
Pierre N.E. De Graan ◽  
Antonio Caputi ◽  
...  

1999 ◽  
Vol 830 (1) ◽  
pp. 135-143 ◽  
Author(s):  
E Lacassie ◽  
M.-F Dreyfuss ◽  
J.L Daguet ◽  
M Vignaud ◽  
P Marquet ◽  
...  

2007 ◽  
Vol 44 (2) ◽  
pp. 558-563 ◽  
Author(s):  
Pierina Sueli Bonato ◽  
Anderson Rodrigo Moraes de Oliveira ◽  
Fernando José Malagueño de Santana ◽  
Bruno José Dumet Fernandes ◽  
Vera Lucia Lanchote ◽  
...  

1994 ◽  
Vol 48 (6) ◽  
pp. 655-661 ◽  
Author(s):  
George R. Agnes ◽  
Gary Horlick

Spectral results are presented illustrating the capability of electrospray mass spectrometry (ES-MS) for the determination of the composition of solution samples. The solution components that can be determined include the elemental and molecular forms of anions and cations. Three modes of positive-ion ES-MS are described: the ion cluster mode, the metal-ion mode, and an intermediate mode. The modes are established by operating the electrospray source at specific voltages and curtain gas flow rate values, and each mode provides a unique mass spectral picture of the solution components with primary focus on cationic species (i.e., metal ions). Results are also presented for operation of the electrospray source in negative-ion mode. In this mode both elemental anions (i.e., halides) and molecular anions (i.e., oxo-anions) can be determined.


Sign in / Sign up

Export Citation Format

Share Document