scholarly journals Design and Analysis for Early Warning of Rotor UAV Based on Data-Driven DBN

Electronics ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 1350 ◽  
Author(s):  
Chen ◽  
Wu ◽  
Wu ◽  
Xiong ◽  
Han ◽  
...  

The unmanned aerial vehicle (UAV), which is a typical multi-sensor closed-loop flight control system, has the properties of multivariable, time-varying, strong coupling, and nonlinearity. Therefore, it is very difficult to obtain an accurate mathematical diagnostic model based on the traditional model-based method; this paper proposes a UAV sensor diagnostic method based on data-driven methods, which greatly improves the reliability of the rotor UAV nonlinear flight control system and achieves early warning. In order to realize the rapid on-line fault detection of the rotor UAV flight system and solve the problems of over-fitting, limited generalization, and long training time in the traditional shallow neural network for sensor fault diagnosis, a comprehensive fault diagnosis method based on deep belief network (DBN) is proposed. Using the DBN to replace the shallow neural network, a large amount of off-line historical sample data obtained from the rotor UAV are trained to obtain the optimal DBN network parameters and complete the on-line intelligent diagnosis to achieve the goal of early warning as possible as quickly. In the end, the two common faults of the UAV sensor, namely the stuck fault and the constant deviation fault, are simulated and compared with the back propagation (BP) neural network model represented by the shallow neural network to verify the effectiveness of the proposed method in the paper.

Aerospace ◽  
2019 ◽  
Vol 6 (3) ◽  
pp. 27 ◽  
Author(s):  
Manuel Pusch ◽  
Daniel Ossmann ◽  
Tamás Luspay

The model-based flight control system design for a highly flexible flutter demonstrator, developed in the European FLEXOP project, is presented. The flight control system includes a baseline controller to operate the aircraft fully autonomously and a flutter suppression controller to stabilize the unstable aeroelastic modes and extend the aircraft’s operational range. The baseline control system features a classical cascade flight control structure with scheduled control loops to augment the lateral and longitudinal axis of the aircraft. The flutter suppression controller uses an advanced blending technique to blend the flutter relevant sensor and actuator signals. These blends decouple the unstable modes and individually control them by scheduled single loop controllers. For the tuning of the free parameters in the defined controller structures, a model-based approach solving multi-objective, non-linear optimization problems is used. The developed control system, including baseline and flutter control algorithms, is verified in an extensive simulation campaign using a high fidelity simulator. The simulator is embedded in MATLAB and a features non-linear model of the aircraft dynamics itself and detailed sensor and actuator descriptions.


Sign in / Sign up

Export Citation Format

Share Document