scholarly journals Gen-Set Control in Stand-Alone/RES Integrated Power Systems

Energies ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 3353 ◽  
Author(s):  
Alessandro Corsini ◽  
Luca Cedola ◽  
Francesca Lucchetta ◽  
Eileen Tortora

Power supply in stand-alone power systems, such those in non-grid connected islands, represents an important area of study in investigating smart energy concepts. In particular, the discontinuity in renewable energy availability and the mismatch with power demand are likely to hinder grid stability and overall system efficiency. Typically, the load-levelling relies on diesel engine gen-sets which suffer the modulation of power output resulting in increased operation costs and life time reduction. Although energy storage can complement power fluxes balance, a proper dispatch strategy is needed in order to improve diesel engine operations in Renewable Energy Source (RES) integrated systems. The present study investigates the merit of a dispatch strategy aiming at improving gen-set performance in a hybrid RES/storage/Diesel Engine Generator set (DEGS) power configuration. The proposed dispatch strategy is modelled in a transient simulation software, with hourly based analysis over a year period and is applied to a small island case study.

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 573
Author(s):  
Mohamed Mokhtar ◽  
Mostafa I. Marei ◽  
Mariam A. Sameh ◽  
Mahmoud A. Attia

The frequency of power systems is very sensitive to load variations. Additionally, with the increased penetration of renewable energy sources in electrical grids, stabilizing the system frequency becomes more challenging. Therefore, Load Frequency Control (LFC) is used to keep the frequency within its acceptable limits. In this paper, an adaptive controller is proposed to enhance the system performance under load variations. Moreover, the proposed controller overcomes the disturbances resulting from the natural operation of the renewable energy sources such as Wave Energy Conversion System (WECS) and Photovoltaic (PV) system. The superiority of the proposed controller compared to the classical LFC schemes is that it has auto tuned parameters. The validation of the proposed controller is carried out through four case studies. The first case study is dedicated to a two-area LFC system under load variations. The WECS is considered as a disturbance for the second case study. Moreover, to demonstrate the superiority of the proposed controller, the dynamic performance is compared with previous work based on an optimized controller in the third case study. Finally in the fourth case study, a sensitivity analysis is carried out through parameters variations in the nonlinear PV-thermal hybrid system. The novel application of the adaptive controller into the LFC leads to enhance the system performance under disturbance of different sources of renewable energy. Moreover, a robustness test is presented to validate the reliability of the proposed controller.


2020 ◽  
Vol 12 (15) ◽  
pp. 6084
Author(s):  
Simona-Vasilica Oprea ◽  
Adela Bâra ◽  
Ștefan Preda ◽  
Osman Bulent Tor

Electricity generation from renewable energy sources (RES) has a common feature, that is, it is fluctuating, available in certain amounts and only for some periods of time. Consuming this electricity when it is available should be a primary goal to enhance operation of the RES-powered generating units which are particularly operating in microgrids. Heavily influenced by weather parameters, RES-powered systems can benefit from implementation of sensors and fuzzy logic systems to dynamically adapt electric loads to the volatility of RES. This study attempts to answer the following question: How to efficiently integrate RES to power systems by means of sustainable energy solutions that involve sensors, fuzzy logic, and categorization of loads? A Smart Adaptive Switching Module (SASM) architecture, which efficiently uses electricity generation of local available RES by gradually switching electric appliances based on weather sensors, power forecast, storage system constraints and other parameters, is proposed. It is demonstrated that, without SASM, the RES generation is supposed to be curtailed in some cases, e.g., when batteries are fully charged, even though the weather conditions are favourable. In such cases, fuzzy rules of SASM securely mitigate curtailment of RES generation by supplying high power non-traditional storage appliances. A numerical case study is performed to demonstrate effectiveness of the proposed SASM architecture for a RES system located in Hulubești (Dâmbovița), Romania.


2020 ◽  
Vol 170 ◽  
pp. 01015
Author(s):  
Avinash Kaldate ◽  
Amarsingh Kanase-Patil ◽  
Shashikant Lokhande

One downside to Green Energy is that it cannot be estimated. Therefore, determining the optimum planning and perfect working strategies for the resources to be included in the hybrid system is very important. HOMER software has been used in this research paper to solve the case study of the hybrid renewable energy system. Due to its extensive analytical capabilities and advanced prediction capabilities based on the sensitivity of variables, HOMER is one of the most used software for optimal planning purposes. A case study for the sizing of a renewable energy-based hybrid system is solved in this article, using the Hybrid Optimization of Multiple Energy Resources (HOMER) software. Photovoltaic panels (PV panels), wind turbines (WT), batteries, converters, electric charge and grid are used in case study. The results of the simulation are presented in graphical form and tabulated for better system visualization. The design of a system to supply 6.8 KWh/d whereas the peak is 1.04 KW electric loads has been performed using HOMER software. In order to allow the user to choose the most suitable option, a comparative analysis has made, showing the pros and cons of cases. Optimum construction conditions help to lower operating costs.


2018 ◽  
Vol 2 (1) ◽  
pp. 1-9
Author(s):  
Barry D. Solomon ◽  
Adam M. Wellstead

In the United States, 29 states, Washington, D.C. and three territories have adopted a mandatory Renewable Portfolio Standard (RPS) for their electric power systems, while eight states and one territory have set renewable energy goals. Many foreign nations have adopted an RPS as well. Thus far, almost all RPSs across the United States have met their interim goals with targets and timetables that vary widely. Hawaii’s RPS is the most ambitious, with a 100% target set for 2045 (though Vermont set a 75% target for 2032). This paper provides a case study of the Hawai’i RPS. The paper focuses on geographical issues and perspectives that may tease out the course of the states’ electricity future: sensitivity to climate change, population distribution, interisland rivalries, as well as the need for greater energy storage and complementary policies. An important complexity is the challenge of meeting electricity demand on six separate Hawaiian Islands (because of the lack of an interisland transmission cable), although all of them have substantial renewable energy resources.


2020 ◽  
Vol 54 ◽  
pp. 25-35 ◽  
Author(s):  
Mohar Chattopadhyay ◽  
Debabrata Chattopadhyay

Sign in / Sign up

Export Citation Format

Share Document