scholarly journals Thermal Performance of a Cylindrical Lithium-Ion Battery Module Cooled by Two-Phase Refrigerant Circulation

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 8094
Author(s):  
Bichao Lin ◽  
Jiwen Cen ◽  
Fangming Jiang
Keyword(s):  
Thermal Management ◽  
Management System ◽  
Cooling System ◽  
Maximum Temperature ◽  
Two Phase ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Battery Thermal Management System ◽  
Li Ion ◽  
Battery Module

It is important for the safety and good performance of a Li-ion battery module/pack to have an efficient thermal management system. In this paper, a battery thermal management system with a two-phase refrigerant circulated by a pump was developed. A battery module consisting of 240 18650-type Li-ion batteries was fabricated based on a finned-tube heat-exchanger structure. This structural design offers the potential to reduce the weight of the battery thermal management system. The cooling performance of the battery module was experimentally studied under different charge/discharge C-rates and with different refrigerant circulation pump operation frequencies. The results demonstrated the effectiveness of the cooling system. It was found that the refrigerant-based battery thermal management system could maintain the battery module maximum temperature under 38 °C and the temperature non-uniformity within 2.5 °C for the various operation conditions considered. The experimental results with 0.5 C charging and a US06 drive cycle showed that the thermal management system could reduce the maximum temperature difference in the battery module from an initial value of 4.5 °C to 2.6 °C, and from the initial 1.3 °C to 1.1 °C, respectively. In addition, the variable pump frequency mode was found to be effective at controlling the battery module, functioning at a desirable constant temperature and at the same time minimizing the pump work consumption.

scholarly journals Investigation of the Applicability of Helium-Based Cooling System for Li-Ion Batteries

Electrochem ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 135-148
Author(s):  
Mohammad Alipour ◽  
Aliakbar Hassanpouryouzband ◽  
Riza Kizilel
Keyword(s):  
Thermal Management ◽  
Cooling System ◽  
Flow Direction ◽  
Maximum Temperature ◽  
Li Ion Batteries ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Inlet Flow Rate ◽  
Battery Thermal Management System ◽  
Li Ion

This paper proposes a novel He-based cooling system for the Li-ion batteries (LIBs) used in electric vehicles (EVs) and hybrid electric vehicles (HEVs). The proposed system offers a novel alternative battery thermal management system with promising properties in terms of safety, simplicity, and efficiency. A 3D multilayer coupled electrochemical-thermal model is used to simulate the thermal behavior of the 20 Ah LiFePO4 (LFP) cells. Based on the results, He gas, compared to air, effectively diminishes the maximum temperature rise and temperature gradient on the cell surface and offers a viable option for the thermal management of Li-ion batteries. For instance, in comparison with air, He gas offers 1.18 and 2.29 °C better cooling at flow rates of 2.5 and 7.5 L/min, respectively. The cooling design is optimized in terms of the battery’s temperature uniformity and the battery’s maximum temperature. In this regard, the effects of various parameters such as inlet diameter, flow direction, and inlet flow rate are investigated. The inlet flow rate has a more evident influence on the cooling efficiency than inlet/outlet diameter and flow direction. The possibility of using helium as a cooling fluid is shown to open new doors in the subject matter of an effective battery thermal management system.

Numerical analysis of heat-pipe-based battery thermal management system for prismatic lithium-ion batteries

2021 ◽  
pp. 1-16
Author(s):  
Jianping Cheng ◽  
Shenlong Shuai ◽  
Renchen Zhao ◽  
Zhiguo Tang
Keyword(s):  
Heat Pipe ◽  
Thermal Management ◽  
Management System ◽  
Discharge Rate ◽  
Maximum Temperature ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Battery Thermal Management System ◽  
Battery Module ◽  
Heating Medium

Abstract An effective battery thermal management system (BTMS) is essential for controlling both the maximum temperature and the temperature uniformity of a battery module. In this study, a novel and lightweight BTMS for prismatic batteries based on a heat pipe is proposed. A numerical model is created to study the influence of heat transfer designs and other factors on the thermal performance of the BTMS, and the simulation results are checked experimentally. The results show that when the condensation section of the heat pipe is cooled by liquid, the maximum temperature of the battery (Tmax) is reduced by 18.1% compared with air cooling. Decreasing the coolant temperature can reduce T_max, but can also lead to an undesirable temperature nonuniformity. The T_max and the maximum temperature difference (ΔTmax) in a battery module both increase rapidly as the discharge rate rises. The Tmax and ΔTmax are lower than 40 °C and 5 °C respectively when the discharge rate of the battery is lower than 2C. Under preheating conditions in cold weather, increasing the temperature of the heating medium can improve the temperature of the batteries, but at the same time it can make the battery module's temperature more nonuniform, and also add to cost. The temperature of the heating medium should therefore be selected with care. It could be concluded that the above results can provide perspectives in designing and optimizing battery thermal management system.

scholarly journals Hybrid Battery Thermal Management System in Electrical Vehicles: A Review

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6257
Author(s):  
Chunyu Zhao ◽  
Beile Zhang ◽  
Yuanming Zheng ◽  
Shunyuan Huang ◽  
Tongtong Yan ◽  
...  
Keyword(s):  
Thermal Management ◽  
Management System ◽  
Air Cooling ◽  
Liquid Cooling ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Battery Thermal Management System ◽  
Cooling Phase ◽  
Li Ion ◽  
Forced Air

The Li-ion battery is of paramount importance to electric vehicles (EVs). Propelled by the rapid growth of the EV industry, the performance of the battery is continuously improving. However, Li-ion batteries are susceptible to the working temperature and only obtain the optimal performance within an acceptable temperature range. Therefore, a battery thermal management system (BTMS) is required to ensure EVs’ safe operation. There are various basic methods for BTMS, including forced-air cooling, liquid cooling, phase change material (PCM), heat pipe (HP), thermoelectric cooling (TEC), etc. Every method has its unique application condition and characteristic. Furthermore, based on basic BTMS, more hybrid cooling methods adopting different basic methods are being designed to meet EVs’ requirements. In this work, the hybrid BTMS, as a more reliable and environmentally friendly method for the EVs, will be compared with basic BTMS to reveal its advantages and potential. By analyzing its cost, efficiency and other aspects, the evaluation criterion and design suggestions are put forward to guide the future development of BTMS.

Battery Thermal Management System Design: Role of Influence of Nanofluids, Flow Directions, and Channels

2019 ◽  
Vol 17 (2) ◽  
Author(s):  
Sanjay Srinivaas ◽  
Wei Li ◽  
Akhil Garg ◽  
Xiongbin Peng ◽  
Liang Gao
Keyword(s):  
Pressure Drop ◽  
Thermal Management ◽  
Temperature Rise ◽  
Management System ◽  
Battery Pack ◽  
Maximum Temperature ◽  
Temperature Deviation ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Battery Thermal Management System

Abstract Lithium-ion batteries are currently being produced and used in large quantities in the automobile sector as a clean alternative to fossil fuels. The thermal behavior of the battery pack is a very important criterion, which is not only essential for safety but also has an equally important role in the capacity and life cycle of the batteries. The liquid battery thermal management system is a very efficient type of thermal management system, and mini-channel-based liquid cooling systems are one of the most popular type of the battery thermal management system and have been researched extensively. This paper mainly intends to study the effects of tapering, the addition of grooves to the channel, the use of different nanofluids, and the flow direction of coolant on the thermal performance of the battery pack using a three-dimensional computational fluid dynamics model. The results suggest that converging channels can be used to control the temperature rise, while diverging channels can be used to control the temperature deviation. The addition of grooves and the use of nanofluids were beneficial in reducing the temperature rise. The final setups were able to reduce the maximum temperature rise by 2.267 K with a substantial pressure drop increase and by 1.513 K with an increase in pressure drop of only 19.92%.

scholarly journals Experimental Investigation on a Thermoelectric Cooler for Thermal Management of a Lithium-Ion Battery Module

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Xinxi Li ◽  
Zhaoda Zhong ◽  
Jinghai Luo ◽  
Ziyuan Wang ◽  
Weizhong Yuan ◽  
...  
Keyword(s):  
Thermal Management ◽  
Cooling System ◽  
Discharge Rate ◽  
Lithium Ion ◽  
Design And Optimization ◽  
System A ◽  
Battery Thermal Management ◽  
Thermal Management System ◽  
Battery Thermal Management System ◽  
Battery Module

Electric vehicles (EVs) powered by lithium batteries, which are a promising type of green transportation, have attracted much attention in recent years. In this study, a thermoelectric generator (TEG) coupled with forced convection (F-C) was designed as an effective and feasible cooling system for a battery thermal management system. A comparison of natural convection cooling, F-C cooling, and TEG cooling reveals that the TEG is the best cooling system. Specifically, this system can decrease the temperature by 16.44% at the discharge rate of 3C. The coupled TEG and F-C cooling system can significantly control temperature at a relatively high discharge rate. This system not only can decrease the temperature of the battery module promptly but also can reduce the energy consumption compared with the two other TEG-based cooling systems. These results are expected to supply an effective basis of the design and optimization of battery thermal management systems to improve the reliability and safety performance of EVs.

Sign in / Sign up

Export Citation Format

Share Document