scholarly journals Application of Direct Numerical Simulation to Determine the Correlation Describing Friction Losses during the Transverse Flow of Fluid in Hexagonal Array Pin Bundles

Fluids ◽  
2022 ◽  
Vol 7 (1) ◽  
pp. 22
Author(s):  
Yury Shvetsov ◽  
Yury Khomyakov ◽  
Mikhail Bayaskhalanov ◽  
Regina Dichina
Keyword(s):  
Numerical Simulation ◽  
Reynolds Number ◽  
Pressure Drop ◽  
Liquid Metal ◽  
Direct Numerical Simulation ◽  
Incompressible Fluid ◽  
Reactor Core ◽  
Transverse Flow ◽  
Hexagonal Array ◽  
Flow Through

This paper presents the results of a numerical simulation to determine the hydraulic resistance for a transverse flow through the bundle of hexagonal rods. The calculations were carried out using the precision CFD code CONV-3D, intended for direct numerical simulation of the flow of an incompressible fluid (DNS-approximation) in the parts of fast reactors cooled by liquid metal. The obtained dependencies of the pressure drop and the coefficient of anisotropy of friction on the Reynolds number can be used in the thermal-hydraulic codes that require modeling of the flow in similar structures and, in particular, in the inter-wrapper space of the reactor core.

scholarly journals Direct Numerical Simulation of the Flow Through a Randomly Packed Pebble Bed

2020 ◽  
Vol 142 (4) ◽  
Author(s):  
Mustafa Alper Yildiz ◽  
Gerrit Botha ◽  
Haomin Yuan ◽  
Elia Merzari ◽  
Richard C. Kurwitz ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Direct Numerical Simulation ◽  
Power Systems ◽  
Nuclear Power ◽  
Flow Behavior ◽  
Reactor Core ◽  
Reynolds Numbers ◽  
Fourth Generation ◽  
Flow Through ◽  
Flow Domain

Abstract The proposition for molten salt and high-temperature gas-cooled reactors has increased the focus on the dynamics and physics in randomly packed pebble beds. Research is being conducted on the validity of these designs as a possible contestant for the fourth-generation nuclear power systems. A detailed understanding of the coolant flow behavior is required in order to ensure proper cooling of the reactor core during normal and accident conditions. In order to increase the understanding of the flow through these complex geometries and enhance the accuracy of lower-fidelity modeling, high-fidelity approaches such as direct numerical simulation (DNS) can be utilized. Nek5000, a spectral-element computational fluid dynamics (CFD) code, was used to develop DNS fluid flow data. The flow domain consisted of 147 pebbles enclosed by a bounding wall. In the work presented, the Reynolds numbers ranged from 430 to 1050 based on the pebble diameter and inlet velocity. Characteristics of the flow domain such as volume averaged porosity, axial porosity, and radial porosity were studied and compared with correlations available in the literature. Friction factors from the DNS results for all Reynolds numbers were compared with correlations in the literature. The first- and second-order statistics show good agreement with the available experimental data. Turbulence length scales were analyzed in the flow. Reynolds stress anisotropy was characterized by utilizing invariant analysis. Overall, the results of the analysis in this study provide deeper understanding of the flow behavior and the effect of the wall in packed beds.

scholarly journals The Turbulent Flow over the BARC Rectangular Cylinder: A DNS Study

2021 ◽  
Author(s):  
Alessandro Chiarini ◽  
Maurizio Quadrio
Keyword(s):  
Numerical Simulation ◽  
Reynolds Number ◽  
Direct Numerical Simulation ◽  
Finite Differences ◽  
Turbulence Models ◽  
Fine Tuning ◽  
Rectangular Cylinder ◽  
Budget Equation ◽  
Complete Set ◽  
First Time

AbstractA direct numerical simulation (DNS) of the incompressible flow around a rectangular cylinder with chord-to-thickness ratio 5:1 (also known as the BARC benchmark) is presented. The work replicates the first DNS of this kind recently presented by Cimarelli et al. (J Wind Eng Ind Aerodyn 174:39–495, 2018), and intends to contribute to a solid numerical benchmark, albeit at a relatively low value of the Reynolds number. The study differentiates from previous work by using an in-house finite-differences solver instead of the finite-volumes toolbox OpenFOAM, and by employing finer spatial discretization and longer temporal average. The main features of the flow are described, and quantitative differences with the existing results are highlighted. The complete set of terms appearing in the budget equation for the components of the Reynolds stress tensor is provided for the first time. The different regions of the flow where production, redistribution and dissipation of each component take place are identified, and the anisotropic and inhomogeneous nature of the flow is discussed. Such information is valuable for the verification and fine-tuning of turbulence models in this complex separating and reattaching flow.

scholarly journals Effects of Turbulent Reynolds Number on the Performance of Algebraic Flame Surface Density Models for Large Eddy Simulation in the Thin Reaction Zones Regime: A Direct Numerical Simulation Analysis

2012 ◽  
Vol 2012 ◽  
pp. 1-13 ◽  
Author(s):  
Mohit Katragadda ◽  
Nilanjan Chakraborty ◽  
R. S. Cant
Keyword(s):  
Numerical Simulation ◽  
Reynolds Number ◽  
Fractal Dimension ◽  
Direct Numerical Simulation ◽  
Surface Density ◽  
Flame Surface ◽  
Algebraic Models ◽  
Flame Surface Density ◽  
Turbulent Reynolds Number ◽  
Reaction Zones

A direct numerical simulation (DNS) database of freely propagating statistically planar turbulent premixed flames with a range of different turbulent Reynolds numbers has been used to assess the performance of algebraic flame surface density (FSD) models based on a fractal representation of the flame wrinkling factor. The turbulent Reynolds number Rethas been varied by modifying the Karlovitz number Ka and the Damköhler number Da independently of each other in such a way that the flames remain within the thin reaction zones regime. It has been found that the turbulent Reynolds number and the Karlovitz number both have a significant influence on the fractal dimension, which is found to increase with increasing Retand Ka before reaching an asymptotic value for large values of Retand Ka. A parameterisation of the fractal dimension is presented in which the effects of the Reynolds and the Karlovitz numbers are explicitly taken into account. By contrast, the inner cut-off scale normalised by the Zel’dovich flame thicknessηi/δzdoes not exhibit any significant dependence on Retfor the cases considered here. The performance of several algebraic FSD models has been assessed based on various criteria. Most of the algebraic models show a deterioration in performance with increasing the LES filter width.

Effects of the Equivalence Ratio and Reynolds Number on Turbulence and Flame Front Interactions by Direct Numerical Simulation

2016 ◽  
Vol 30 (8) ◽  
pp. 6727-6737 ◽  
Author(s):  
Cong Xu ◽  
Zhihua Wang ◽  
Wubin Weng ◽  
Kaidi Wan ◽  
Ronald Whiddon ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Reynolds Number ◽  
Direct Numerical Simulation ◽  
Flame Front ◽  
Equivalence Ratio
Sign in / Sign up

Export Citation Format

Share Document