scholarly journals Review and Improvement of Chemical Hazard Risk Management of Korean Occupational Safety and Health Agency

Author(s):  
Saemi Shin ◽  
Sang-Hoon Byeon

In 2012, the Korean Occupational Safety and Health Agency developed Chemical Hazard Risk Management (CHARM) as a risk assessment tool. This study aims to reorganize the CHARM technique by complementing its logical loopholes, while evaluating the risk to enterprises and verifying this technique by applying it to some enterprises in Korea. The optimized technique changed the method of quantitative assessment and evaluation criteria, matched the risk level with the required control level, and specified the use of control practice. For the target enterprises, for several assessment methods, risk levels, hazard bands, exposure bands, and the risk assessment results were derived, and the same types of options were compared. Fewer informational methods resulted in more conservative results of risk levels and hazard bands. Since the control status of the enterprises could not be confirmed and the substances handled at the target enterprises were limited in this study, a follow-up study should be performed with more target materials and additional information on the current control status of the enterprises.

Author(s):  
Hyung-Il Moon ◽  
Sang-Woo Han ◽  
Saemi Shin ◽  
Sang-Hoon Byeon

The risk assessment of hazardous substances has become increasingly important for the efficient prevention and management of various diseases or accidents caused by increased amounts of hazardous substances in the workplace. In this study, risk assessment was conducted for 36 kinds of hazardous substances requiring management by using qualitative and quantitative risk assessments. Qualitative risk assessment was performed by multiplying the exposure level class by the hazard class according to the Korea Occupational Safety and Health Agency’s (KOSHA) Chemical Hazard Risk Management (CHARM). The quantitative risk assessment was followed by a four-step risk assessment system presented in the Guidelines for Hazard Risk Assessment of Chemicals (KOSHA GUIDE W-6-2016). In the quantitative assessments, we presented a new method of classifying risk levels into four steps, much like qualitative assessments. In this study, the quantitative risk assessment was considered difficult to predict through qualitative risk assessment. Therefore, it is necessary to perform a quantitative risk assessment after a qualitative risk assessment for a higher level of risk assessment.


Work ◽  
2021 ◽  
pp. 1-11
Author(s):  
Carlos Carvalhais ◽  
Micaela Querido ◽  
Cristiana C. Pereira ◽  
Joana Santos

BACKGROUND: The COVID-19 global pandemic brought several challenges to occupational safety and health practice. One of these is the need to (re)assess the occupational risks, particularly, biological risks. OBJECTIVE: The purpose of this work is to promote guidance to occupational safety and health practitioners when conducting a biological risk assessment in this context. METHODS: The main steps of the biological risk assessment are explained with some inputs regarding the novelty posed by SARS-CoV-2 and an example of a qualitative risk assessment method is presented. Also, its application to two different activities was exemplified. RESULTS: In both cases, the assessment considered that vulnerable workers were working from home or in medical leave. The results showed low or medium risk level for the assessed tasks. For medium risk level, additional controls are advised, such maintain social distancing, sanitize instruments/equipment before use, use proper and well-maintained PPE (when applicable), and promote awareness sessions to spread good practices at work. Employers must be aware of their obligations regarding biological risk assessment and OSH practitioners must be prepared to screen and link the abundance of scientific evidence generated following the outbreak, with the technical practice. CONCLUSIONS: This paper could be an important contribution to OSH practice since it highlights the need to (re)assess occupational risks, especially biological risk, to ensure a safe return to work, providing technical guidance.


2021 ◽  
Vol 5 (2) ◽  
pp. 15-25
Author(s):  
Muhammad Huda Firmansyah

Background: Risk management is a preventive effort for a company, especially those engaged in the service sector, which is very prone to errors and complaints. For this reason, it is necessary to map the risks that occur in accordance with the work unit in it which is expected to minimize the number of accidents or errors in both patients, visitors and employees in the hospital. In the 2019 patient safety incident report data at the Surabaya A. Yani Islamic Hospital, it was found that there were incidents which included near miss 93%, not injured 4%, unexpected events 3% and Sentinel 0%. The purpose of this study was to identify and identify the application of occupational safety and health risk management at the A. Yani Islamic Hospital in Surabaya. Methods: This thesis is a qualitative research with a case study method with the aim of fully describing the implementation of K3 risk management at Surabaya A. Yani Hospital based on observation, survey and documentation data on 37 units and hospital workplaces by identifying risks. , analyze and find risk control measures. Results: The results showed that the implementation of K3 risk management in the Islamic Hospital of Surabaya A. Yani based on the results of risk identification obtained as many as 25 risks in the graha building and the old building which were further analyzed by finding 15 moderate risks and 10 high risks. can be done is by repairing damaged infrastructure and improving the existing security system at the A. Yani Islamic Hospital in Surabaya. Conclusion: The conclusion in this study is the implementation of K3 risk management at the Islamic Hospital of Surabaya A. Yani based on the process of risk identification and risk analysis, there are 25 potential risks, of which there are 15 moderate risks and 10 high risks that can potentially cause accidents to employees, visitors and patients. In this case, control efforts are made to minimize the number of incidents and accidents.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nor Haslinda Abas ◽  
Nick Blismas ◽  
Helen Lingard

PurposeThe purpose of this paper is to describe the development of a risk assessment model to assess the occupational safety and health (OSH) risks presented by different construction approaches, namely traditional and industrialised building system (IBS). The development process applies the concept of argumentation theory, which helps construction designers integrate the management of OSH risk into the design process. In addition, an energy damage model is used as an underpinning framework for developing the model.Design/methodology/approachDevelopment of the model was achieved through two phases. Phase I involved collection of data on the activities involved in the construction process and their associated OSH risks, derived from five different case studies, field observation and interviews. Knowledge of design aspects that have the potential to impact on OSH was obtained from document analysis. Using the knowledge obtained in phase I, a model was developed in the form of argument trees (Phase II), which represent a reasoning template with regard to options available to designers when they make judgements about aspects of their designs. Inferences from these aspects eventually determined the magnitude of the damaging energies for every activity involved. Finally, the model was validated by panels of experts, and revisions and amendments were made to the model accordingly.FindingsThe risk assessment model development revealed that the concept of argumentation theory and energy damage model is suitable to represent design safety risk knowledge and effectively address the designer's role in making decisions in their designs and further illuminate the level of OSH risk their designs pose.Practical implicationsThe developed model provides best-practice reasoning support for construction designers, which help them to understand the impact of their designs decisions on worker's safety and health, and thereby assist them to further mitigate the risk to an acceptable level.Originality/valueThis study departs from the existing tool in that the model was developed based upon the combination of argumentation theory and energy damage model. The significance of the model is discussed.


2021 ◽  
Vol 1 (01) ◽  
pp. 1-12
Author(s):  
Suprapto Suprapto ◽  
Affan Ahmad

Introduction: Hospital as a health service institution for thecommunity is a workplace that has a high risk to the safety andhealth of hospital human resources, patients, patient companions,visitors, and hospital environment so that the hospital is obliged toimplement the Republic of Indonesia Ministerial Regulation No. 66of 2016 concerning Hospital Work Safety and Health Standards.Objectives: The purpose of this study was to determine theImplementation of Occupational Safety and Health Standards at theJagakarsa Regional Hospital in 2019.Method: This type of research is qualitative using 5 informants.Result: From the results of research Jagakarsa Hospital hasimplemented the application of occupational safety and healthstandards of the hospital which include risk management, safetyand security, occupational health services, Management ofhazardous and toxic materials (B3) from aspects of occupationalsafety and health, fire prevention and control, management hospitalinfrastructure from aspects of occupational safety and health,management of medical equipment from aspects of occupationalsafety and health, preparedness to deal with emergencies ordisasters have been implemented well by Jagakarsa RegionalHospital but in reality there are still some elements that have notbeen carried out according to the Occupational Safety and HealthStandards diseases including risk management, fire control andprevention as well as hospital infrastructure.Conclution: Jagakarsa Regional Hospital should complement theshortcomings in the field so that it can realize the dream of thehospital becoming a favorite and perfect hospital


Author(s):  
Marcia Nathai-Balkissoon ◽  
Kit Fai Pun

As Trinidad and Tobago (T&T) embraces the digital age, one field in which the country must advance is Occupational Safety and Health (OSH). This paper seeks to identify how T&T's Occupational Safety and Health Agency (TTOSHA) addresses e-government (e-gov) through its website, how its approach compares to those used by leading OSH bodies in two first-world countries, the USA (US) and the UK, and how the T&T approach may be improved. The OSH e-gov practices of the US OSHA, UK HSE, and TTOSHA websites are presented. Through a content analysis and comparison exercise, e-gov shortcomings of the TTOSHA site are noted and recommendations for improvement are proposed. The paper's potential benefits include improved accessibility and utility of the TTOSHA site through improved matching of site content to international practice, broader ranges of resource topics and media types, improved responsiveness and connectivity with stakeholders, and better focus on OSH performance through the dissemination of searchable OSH statistics and performance reports.


Sign in / Sign up

Export Citation Format

Share Document