scholarly journals Wing Morphometrics of Aedes Mosquitoes from North-Eastern France

Insects ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 341
Author(s):  
Jean-Philippe Martinet ◽  
Hubert Ferté ◽  
Pacôme Sientzoff ◽  
Eva Krupa ◽  
Bruno Mathieu ◽  
...  

Background: In the context of the increasing circulation of arboviruses, a simple, fast and reliable identification method for mosquitoes is needed. Geometric morphometrics have proven useful for mosquito classification and have been used around the world on known vectors such as Aedes albopictus. Morphometrics applied on French indigenous mosquitoes would prove useful in the case of autochthonous outbreaks of arboviral diseases. Methods: We applied geometric morphometric analysis on six indigenous and invasive species of the Aedes genus in order to evaluate its efficiency for mosquito classification. Results: Six species of Aedes mosquitoes (Ae. albopictus, Ae. cantans, Ae. cinereus, Ae. sticticus, Ae. japonicus and Ae. rusticus) were successfully differentiated with Canonical Variate Analysis of the Procrustes dataset of superimposed coordinates of 18 wing landmarks. Conclusions: Geometric morphometrics are effective tools for the rapid, inexpensive and reliable classification of at least six species of the Aedes genus in France.

Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.


2020 ◽  
Vol 18 (1) ◽  
Author(s):  
Abdelnasser Ibrahim ◽  
Aspalilah Alias ◽  
Mohamed Swarhib Shafie ◽  
Faridah Mohd Nor

The present systematic review explores the most sexually dimorphic parameters by using geometric morphometric analysis of human skull. An extended search was conducted in Google Scholars and PubMed (published between 2005 and 2017). The main inclusion criteria were research articles published in English, and studies that used geometric morphometric analysis for classification of human skull. The literature search identified 54 potential relevant articles whereby, five had met the inclusion criteria. Most studies reported positive contribution of geometric morphometric as an alternative and accurate tool for classification of unknown human crania. Geometric morphometric method resulted in a high classification accuracy of sexual dimorphism among different populations. Further studies are required to approach the best method used for varied types of postcranial bones equipped with a more advanced meta-analysis of the results.


Animals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 118
Author(s):  
Pere Miquel Parés-Casanova ◽  
Arcesio Salamanca-Carreño ◽  
René Alejandro Crosby-Granados ◽  
Jannet Bentez-Molano

Skull size and shape have been widely used to study domestic animal populations and breeds. Although several techniques have been proposed to quantify cranial form, few attempts have been made to compare the results obtained by different techniques. While linear morphometrics has traditionally been used in breed characterization, recent advances in geometric morphometrics have created new techniques for specifically quantifying shape and size. The objective of this study was to compare two morphometric methods for their ability to describe external morphology. For this purpose, 20 skull specimens of adult male Araucanian horses were examined. Two age categories were established (the “mature group”, M3 not fully erupted to moderately worn, n = 7; and the “senile group”, M3 totally erupted and highly worn, n = 13). Both methods showed that there were statistical differences between generations, but discrimination rates were different between methods with the geometric morphometric analysis obtaining a rate of 97.5%. Although linear morphometrics was found to be compatible with geometric morphometrics, the latter was better able to discriminate the two groups and it also provides more information on shape.


Author(s):  
Eva I. Riedlecker ◽  
Gail V. Ashton ◽  
Gregory M. Ruiz

Characteristics of the second gnathopod are traditionally used to distinguish between species of caprellid amphipods. However, these distinctions are often subjective and can be variable within a species. Geometric morphometrics were used to quantitatively assess shape variation of the second gnathopod propodus of three species of caprellids in North America, including the non-native Caprella mutica. Gnathopod shapes of C. mutica specimens from different latitudes revealed distinct morphologies; the factors responsible for the shape variations are unknown. Allometric change of propodus shape was observed in C. mutica. Larger individuals showed a wide array of possible propodus morphologies. Despite this variability, there were clear differences between large specimens of C. mutica and two species native to North America: C. alaskana and C. kennerlyi. The use of geometric morphometrics and the thin-plate spline method can serve to both complement descriptions using traditional keys and aid in identification of non-native species in novel geographical regions.


Insects ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 451 ◽  
Author(s):  
Tanasak Changbunjong ◽  
Jiraporn Ruangsittichai ◽  
Gerard Duvallet ◽  
Adrian C. Pont

The genus Haematobosca Bezzi, 1907 (Diptera: Muscidae) contains haematophagous flies of veterinary importance. A new fly species of this genus was recognised from northern Thailand based on morphological characters and described as Haematobosca aberrans Pont, Duvallet & Changbunjong, 2020. In the present study, the mitochondrial cytochrome c oxidase I (COI) gene was used to confirm the morphological identification of H. aberrans. In addition, landmark-based geometric morphometrics was used to determine sexual dimorphism. The molecular analysis was conducted with 10 COI sequences. The results showed that all sequences were 100% identical. The sequence was not highly similar to reference sequences from GenBank and did not match any identified species from Barcode of Life Data Systems (BOLD). Phylogenetic analysis clearly differentiated this species from other species within the subfamily Stomoxyinae. For geometric morphometric analysis, a total of 16 wing pictures were analysed using the landmark-based approach. The results showed significant differences in wing shape between males and females, with a cross-validated classification score of 100%. The allometric analysis showed that wing shape has no correlation with size. Therefore, the COI gene is effective in species identification of H. aberrans, and geometric morphometrics is also effective in determining sexual dimorphism.


Author(s):  
Li-Xuan Sim ◽  
Raja M. Zuha

Abstract Background Considering the practicality of geometric morphometrics which could discriminate insect species, this application was extended to the analysis of blow fly larval growth based on cephalopharyngeal skeleton. In forensic entomology, cephalopharyngeal skeleton plays a crucial role in species identification but the morphometric information of this part is scarce. In this study, Chrysomya megacephala (Fabricius, 1794) was reared in two study replicates in natural conditions and samplings were conducted at fixed daily intervals. Cephalopharyngeal skeletons were removed from larvae and mounted on glass slides. Images were obtained from the specimens; digitized and geometric morphometric analysis on C. megacephala cephalopharyngeal skeletons was performed with MorphoJ software based on the ordination of five landmarks. The assessments of this analysis were based on centroid size measurements, visualization on the landmarks displacements, classification of the relative landmarks by using canonical variate analysis, and ontogenetic allometry determination. Findings Centroid size was strongly correlated with developmental time (p < 0.05) and significantly different between daily intervals (p < 0.05). Ontogenetic allometric effect based on multivariate regression on Procrustes coordinates and centroid size was significant (p < 0.0001), indicating that shape was influenced by growth (60.3%). Disposition occurred on all landmarks during development and was further discriminated based on age groups. Conclusions Other than discriminating between species, geometric morphometrics was found to be practical to visualize larval growth based on cephalopharyngeal skeletons which can be useful in forensic entomology.


2020 ◽  
Vol 15 (6) ◽  
pp. 222-230
Author(s):  
JULIANA KRISTINE ANTHONY ◽  
◽  
HENRY DISNEY ◽  
RAJA MUHAMMAD ZUHA* RAJA MUHAMMAD ZUHA*

Geometric morphometric analysis recently has expanded to insects of forensic importance, mainly adult flies, as correct and valid species identification is important in forensic entomology. The objective of this research was to investigate morphological variations between two forensically important scuttle flies (Diptera: Phoridae) in Malaysia, i.e. Megaselia scalaris (Loew, 1866) and Megaselia spiracularis Schmitz, 1938, based on wing shape analysis. A total of 16 geometrical landmarks was defined and analysed with geometric morphometric procedures using MorphoJ software. Wing centroid size, which represented wing shape, was statistically different between species and sexes. By using residuals from the allometric effect, canonical variate analysis separated all defined groups in different distinct clusters and further cross validated by both species and sexes. Between species, male M. scalaris had broader wing shape than male M. spiracularis, whilst in the female, M. scalaris had a narrower shape at the tip of the wing. Within M. scalaris group, females had broader wing shape at the base than males, whereas in M. spiracularis, the females had narrower shape at the base of the wing than the males. The geometric morphometric analysis in distinguishing forensically important species could be expanded for further investigation, especially in Phoridae family.


2021 ◽  
Vol 22 (10) ◽  
Author(s):  
Jennifer Danila ◽  
GRECEBIO JONATHAN D. ALEJANDRO

Abstract. Danila JS, Alejandro GJD. 2021. Leaf geometric morphometric analyses of Callicarpa and Geunsia (Lamiaceae) in the Malesian region. Biodiversitas 22: 4379-4390. Leaves are one of the most substantial organs of plants for it serves as a basis of species identification. Leaf morphology provides distinguishing features that help in the discrimination of plant species as well as investigation of leaf features among populations. This study aimed to investigate leaf shape variations between the two genera Geunsia Blume group and its closely related taxon, Callicarpa L. (Lamiaceae) using a landmark-based geometric morphometric method. The differences in the leaf shape among former members of Geunsia, namely C. apoensis, C. basilanensis, C. flavida, C. paloensis, C. pentandra, C. ramiflora, and C. surigaensis are also evaluated. Two primary landmarks and 14 semilandmarks were assigned in all samples to represent changes around the leaf margin. The Procrustes fit was generated using MorphoJ software which displays the mean and landmark position for individual configurations. Canonical Variate Analysis (CVA) and Mahalanobis Distance (MD) were able to discriminate all samples of Geunsia species using a scatter plot. Furthermore, Procrustes ANOVA showed a significant difference (P = 0.0082) among the seven species of the Geunsia group. Based on the results obtained, geometric morphometrics of leaf shape is effective in interspecific discrimination within members of Geunsia. However, the result of Discriminant Analysis (DA) showed that Geunsia and Callicarpa groups made leaf shape differences inefficient in discriminating the two genera. Therefore, further morphological studies on landmark-based geometric morphometrics of leaf shape involving a larger number of samples especially in the study of intergeneric classification are suggested.


Sign in / Sign up

Export Citation Format

Share Document