scholarly journals Development of Depth-Limited Wave Boundary Layers over a Smooth Bottom

2020 ◽  
Vol 9 (1) ◽  
pp. 27
Author(s):  
Hitoshi Tanaka ◽  
Nguyen Xuan Tinh ◽  
Xiping Yu ◽  
Guangwei Liu

A theoretical and numerical study is carried out to investigate the transformation of the wave boundary layer from non-depth-limited (wave-like boundary layer) to depth-limited one (current-like boundary layer) over a smooth bottom. A long period of wave motion is not sufficient to induce depth-limited properties, although it has simply been assumed in various situations under long waves, such as tsunami and tidal currents. Four criteria are obtained theoretically for recognizing the inception of the depth-limited condition under waves. To validate the theoretical criteria, numerical simulation results using a turbulence model as well as laboratory experiment data are employed. In addition, typical field situations induced by tidal motion and tsunami are discussed to show the usefulness of the proposed criteria.

2019 ◽  
Vol 59 (2) ◽  
pp. 201-207
Author(s):  
G. M. Reznik

The theory of wave boundary layers developed in [7], is generalized to the case of stably-neutrally stratified ocean consisting of upper homogeneous and lower stratified layers. In this configuration, in addition to the boundary layers near the ocean bottom and/or surface, a wave boundary layer develops near the interface between the layers in the lower stratified part of basin. Each the boundary layer is a narrow domain characterized by sharp, growing in time, vertical gradients of buoyancy and horizontal velocity. As in [7], the near interface boundary layer arises as a result of free linear evolution of rather general initial fields. An asymptotic solution describing the long-term evolution is presented and compared to exact solution; the asymptotic solution approximates the exact one fairly well even on not very large times.


2019 ◽  
Vol 880 ◽  
pp. 239-283 ◽  
Author(s):  
Christoph Wenzel ◽  
Tobias Gibis ◽  
Markus Kloker ◽  
Ulrich Rist

A direct numerical simulation study of self-similar compressible flat-plate turbulent boundary layers (TBLs) with pressure gradients (PGs) has been performed for inflow Mach numbers of 0.5 and 2.0. All cases are computed with smooth PGs for both favourable and adverse PG distributions (FPG, APG) and thus are akin to experiments using a reflected-wave set-up. The equilibrium character allows for a systematic comparison between sub- and supersonic cases, enabling the isolation of pure PG effects from Mach-number effects and thus an investigation of the validity of common compressibility transformations for compressible PG TBLs. It turned out that the kinematic Rotta–Clauser parameter $\unicode[STIX]{x1D6FD}_{K}$ calculated using the incompressible form of the boundary-layer displacement thickness as length scale is the appropriate similarity parameter to compare both sub- and supersonic cases. Whereas the subsonic APG cases show trends known from incompressible flow, the interpretation of the supersonic PG cases is intricate. Both sub- and supersonic regions exist in the boundary layer, which counteract in their spatial evolution. The boundary-layer thickness $\unicode[STIX]{x1D6FF}_{99}$ and the skin-friction coefficient $c_{f}$, for instance, are therefore in a comparable range for all compressible APG cases. The evaluation of local non-dimensionalized total and turbulent shear stresses shows an almost identical behaviour for both sub- and supersonic cases characterized by similar $\unicode[STIX]{x1D6FD}_{K}$, which indicates the (approximate) validity of Morkovin’s scaling/hypothesis also for compressible PG TBLs. Likewise, the local non-dimensionalized distributions of the mean-flow pressure and the pressure fluctuations are virtually invariant to the local Mach number for same $\unicode[STIX]{x1D6FD}_{K}$-cases. In the inner layer, the van Driest transformation collapses compressible mean-flow data of the streamwise velocity component well into their nearly incompressible counterparts with the same $\unicode[STIX]{x1D6FD}_{K}$. However, noticeable differences can be observed in the wake region of the velocity profiles, depending on the strength of the PG. For both sub- and supersonic cases the recovery factor was found to be significantly decreased by APGs and increased by FPGs, but also to remain virtually constant in regions of approximated equilibrium.


Author(s):  
Q Wu ◽  
Q Ye ◽  
G X Meng

This article introduces a new vortex gripper with a diversion body. Vortex gripper, as a pneumatic non-contact handling device, can generate lifting force to hold a workpiece without any contact. In order to predict the characteristics of this new vortex gripper, including pressure distribution on the upper surface of the workpiece, lifting force, supporting stiffness, and flowrate, a computational fluid dynamics study has been carried out. In the vortex cup, air swirling flow is a complex turbulent one; so Reynolds stress model (RSM) was used to describe internal air swirling flow. In addition, an experiment was carried out to study the characteristics of the vortex gripper. When compared with the experimental results, the reliability of numerical simulation results by RSM was verified. The vortex gripper with a diversion body could generate greater lifting force when compared with those designed by Xin et al. with the same air consumption. Therefore, the efficiency of the vortex gripper is improved.


Sign in / Sign up

Export Citation Format

Share Document