scholarly journals 2,2-Bis(phenylselanyl)-1-(p-tolyl)vinyl 2-Oxo-2-(p-tolyl)acetate

Molbank ◽  
10.3390/m1283 ◽  
2021 ◽  
Vol 2021 (4) ◽  
pp. M1283
Author(s):  
Shintaro Kodama ◽  
Vu Thai Hung ◽  
Tomokazu Saeki ◽  
Kei Mihara ◽  
Yuki Yamamoto ◽  
...  

2,2-Bis(phenylselanyl)-1-(p-tolyl)vinyl 2-oxo-2-(p-tolyl)acetate was synthesized via the reaction of p-tolylacetylene with diphenyl diselenide and benzoyl peroxide in benzene under atmospheric conditions. The molecular structure of the synthesized compound was evaluated using single-crystal X-ray analysis and spectral analyses. The process reported here provides a rare example of the direct and selective transformation of a terminal alkyne to the corresponding geminal diseleno-substituted alkene.

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1321
Author(s):  
Yasunobu Asawa ◽  
Aleksandra V. Arsent’eva ◽  
Sergey A. Anufriev ◽  
Alexei A. Anisimov ◽  
Kyrill Yu. Suponitsky ◽  
...  

Bis(carboranyl)amides 1,1′-μ-(CH2NH(O)C(CH2)n-1,2-C2B10H11)2 (n = 0, 1) were prepared by the reactions of the corresponding carboranyl acyl chlorides with ethylenediamine. Crystal molecular structure of 1,1′-μ-(CH2NH(O)C-1,2-C2B10H11)2 was determined by single crystal X-ray diffraction. Treatment of bis(carboranyl)amides 1,1′-μ-(CH2NH(O)C(CH2)n-1,2-C2B10H11)2 with ammonium or cesium fluoride results in partial deboronation of the ortho-carborane cages to the nido-carborane ones with formation of [7,7′(8′)-μ-(CH2NH(O)C(CH2)n-7,8-C2B9H11)2]2−. The attempted reaction of [7,7′(8′)-μ-(CH2NH(O)CCH2-7,8-C2B9H11)2]2− with GdCl3 in 1,2-dimethoxy- ethane did not give the expected metallacarborane. The stability of different conformations of Gd-containing metallacarboranes has been estimated by quantum-chemical calculations using [3,3-μ-DME-3,3′-Gd(1,2-C2B9H11)2]− as a model. It was found that in the most stable conformation the CH groups of the dicarbollide ligands are in anti,anti-orientation with respect to the DME ligand, while any rotation of the dicarbollide ligand reduces the stability of the system. This makes it possible to rationalize the design of carborane ligands for the synthesis of gadolinium metallacarboranes on their base.


2008 ◽  
Vol 63 (11) ◽  
pp. 1267-1275 ◽  
Author(s):  
Bernd Wrackmeyer ◽  
Ezzat Khan ◽  
Wolfgang Milius

Abstract Triethylborane, BEt3, can act as a 1,2-hydroborating reagent towards alkyn-1-ylsilanes, depending on the nature of the silane. A mechanism is proposed invoking hydrogen transfer from the β -carbon of one ethyl group, quite different from the 1,2-hydroboration mechanism using tri-n-propylborane, BnPr3. The structure of the products has been confirmed by comparison with that obtained using 9-borabicyclo[3.3.1]nonane, 9-BBN, as a well established 1,2-hydroborating reagent. All products have been characterized by a consistent set of NMR data (1H, 11B, 13C and 29Si NMR). The molecular structure of (Z)-1-dichlorosilyl-1-[9-(9-borabicyclo[3.3.1]nonyl)]-2-phenylethene has been determined by single crystal X-ray diffraction.


Inorganics ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 97 ◽  
Author(s):  
Marie Gaschard ◽  
Farzaneh Nehzat ◽  
Thomas Cheminel ◽  
Bruno Therrien

The synthesis and characterization of three metalla-rectangles of the general formula [Ru4(η6-p-cymene)4(μ4-clip)2(μ2-Lanthr)2][CF3SO3]4 (Lanthr: 9,10-bis(3,3’-ethynylpyridyl) anthracene; clip = oxa: oxalato; dobq: 2,5-dioxido-1,4-benzoquinonato; donq: 5,8-dioxido-1,4-naphthoquinonato) are presented. The molecular structure of the metalla-rectangle [Ru4(η6-p-cymene)4(μ4-oxa)2(μ2-Lanthr)2]4+ has been confirmed by the single-crystal X-ray structure analysis of [Ru4(η6-p-cymene)4(μ4-oxa)2(μ2-Lanthr)2][CF3SO3]4 · 4 acetone (A2 · 4 acetone), thus showing the anthracene moieties to be available for reaction with oxygen. While the formation of the endoperoxide form of Lanthr was observed in solution upon white light irradiation, the same reaction does not occur when Lanthr is part of the metalla-assemblies.


2014 ◽  
Vol 70 (a1) ◽  
pp. C1138-C1138
Author(s):  
Chiaki Tsuboi ◽  
Kazuki Aburaya ◽  
Shingo Higuchi ◽  
Fumiko Kimura ◽  
Masataka Maeyama ◽  
...  

We have developed magnetically oriented microcrystal array (MOMA) technique that enables single crystal X-ray diffraction analyses from microcrystalline powder. In this method, microcrystals suspended in a UV-curable monomer matrix are there-dimensionally aligned by special rotating magnetic field, followed by consolidation of the matrix by photopolymerization. From thus achieved MOMAs, we have been succeeded in crystal structure analysis for some substances [1, 2]. Though MOMA method is an effective technique, it has some problems as follows: in a MOMA, the alignment is deteriorated during the consolidation process. In addition, the sample microcrystals cannot be recovered from a MOMA. To overcome these problems, we performed an in-situ X-ray diffraction measurement using a three-dimensional magnetically oriented microcrystal suspension (3D MOMS) of L-alanine. An experimental setting of the in-situ X-ray measurement of MOMS is schematically shown in the figure. L-alanine microcrystal suspension was poured into a glass capillary and placed on the rotating unit equipped with a pair of neodymium magnets. Rotating X-ray chopper with 10°-slits was placed between the collimator and the suspension. By using this chopper, it was possible to expose the X-ray only when the rotating MOMS makes a specific direction with respect to the impinging X-ray. This has the same effect as the omega oscillation in conventional single crystal measurement. A total of 22 XRD images of 10° increments from 0° to 220° were obtained. The data set was processed by using conventional software to obtain three-dimensional molecular structure of L-alanine. The structure is in good agreement with that reported for the single crystal. R1 and wR2 were 6.53 and 17.4 %, respectively. RMSD value between the determined molecular structure and the reported one was 0.0045 Å. From this result, we conclude that this method can be effective and practical to be used widely for crystal structure analyses.


1979 ◽  
Vol 34 (3) ◽  
pp. 434-436 ◽  
Author(s):  
A. Müller ◽  
S. Pohl ◽  
M. Dartmann ◽  
J. P. Cohen ◽  
J. M. Bennett ◽  
...  

Abstract The novel tri-nuclear metal-sulfur cluster [Mo3S(S2)6]2- can be obtained as its ammonium salt by the reaction of a Moiv containing aqueous solutions with polysulfide. Its crystal and molecular structure has been determined by a single crystal X-ray study. The crystals are monoclinic (space group Cm, with a = 11.577(6) Å, b = 16.448(7) Å, c = 5.716(2) Å, β = 117.30(3)°, V = 967.2 Å3 , Z = 2, dexptl. = 2.54(2) g/cm3 , dcal = 2.54 g/cm3). The structure consists of isolated [Mo3S(S2)6]2- units, with three Mo atoms at the vertices of a triangle. There are bridging as well as terminal S22--ligands lying above and below the Mo3-plane (bond distances: Mo-Mo = 2.722 Å, Mo-S(terminal) = 2.435, Mo-S(bridging) = 2.452, Mo3-S = 2.353(4) Å and S-S = 2.04 Å (mean values)).


2020 ◽  
Vol 42 (6) ◽  
pp. 928-928
Author(s):  
Fouzia Chang Fouzia Chang ◽  
Najma Memon Najma Memon ◽  
Shahabuddin Memon Shahabuddin Memon ◽  
Muhammad Naeem Ahmed Muhammad Naeem Ahmed ◽  
Muhammad Nawaz Tahir Muhammad Nawaz Tahir ◽  
...  

A novel Poly [bis-and#181;-3,5-dinitro-2-oxidobenzoato) (py) Cu II]/(C12H7CuN3O7) was synthesized by a self assemble method at room temperature. The molecular structure was determined by single-crystal X-ray analysis. The compound crystallizes in the monoclinic system, space group P 2 1/c with lattice parameters of a = 10.2143, b = 5.1651 and c = 26.608, α = 90, β = 99.720, γ = 90, Z = 4, V = 1383.60 (18) and#197;3.Pore size depicted from single crystal XRD data was 47and#197;. The central metal atom Cu (II) is coordinated with oxygen of carboxylates group and nitrogen atom of pyridine. The coordination polyhedron posses square pyramidal geometry is manifested by the N— Cu—O angle of 90o. The structure is composed of monomeric coordination units with the central copper (II) ion is not occupying a centre of symmetry.


1995 ◽  
Vol 50 (12) ◽  
pp. 1811-1817 ◽  
Author(s):  
Max Herberhold ◽  
Christian Köhler ◽  
Wolfgang Milius ◽  
Bernd Wrackmeyer

N,N′-Dialkyl sulfur diimides (1), R(NSN)R [R = Me (a), Et (b), nPr (c), nBu (d)] react with cyclic bis(amino)stannylenes such as 1,3-di-tert-butyl-4,4-dimethyl-1,3,4,2λ2-diazasilastannetedine (2) or 1,3-di-tert-butyl-4,4,5,5-tetramethyl-1,3,4,5,2λ2-diazadisilastannolidine (3) in a 2:1 ratio to give the new spiro-tin(IV) compounds 5a-d, 6b and 6c, built from the respective cyclic bis(amino)stannylene and a seven-membered ring in which the two sulfur diimide groups are coupled via a N-N bond and across the tin atom. A 1:1 adduct 4 is proposed as an intermediate which is the final product 4e in the case of R = tBu (1e). The products were characterized by multinuclear magnetic resonance (1H, 13C, 15N, 29Si, 119Sn NMR), and in the case of 5c the molecular structure was determined by single crystal X-ray structure analysis [monoclinic, space group C2/c ; a = 1504.1(3), b = 1393.3(3), c = 1688.6(3) pm; β = 115.71(3)°].


2018 ◽  
Vol 6 (2) ◽  
pp. 132-136
Author(s):  
Pramod Kumar Yadav

The title compound azobenzene-4, 4′-dicarbonyl chloride has been synthesized in distilled dichlomethane and characterized by elemental analysis (C, H, N), IR and NMR (1H & 13C) studies. The crystal and molecular structure was further confirmed using single crystal X-ray diffraction analysis. It was crystallized in triclinic crystal system with space group P-1. The centrosymmetrically related molecules held together via C–H---O secondary interaction result in molecular aggregation of the compound.  Int. J. Appl. Sci. Biotechnol. Vol 6(2): 132-136


1977 ◽  
Vol 55 (2) ◽  
pp. 333-339 ◽  
Author(s):  
Colin James Lyne Lock ◽  
Graham Turner

The crystal and molecular structure of the title compound has been examined by single crystal X-ray diffraction. The crystals are monoclinic with a = 28.045(10), b = 8.766(3), c = 12.376(5) Å, β = 91.14(3)°. The space group is C2/c and there are eight molecules per unit cell. A total of 5053 independent reflections, of which 2860 were observed, were examined on a Syntex [Formula: see text] diffractometer. The structure was refined by full matrix least squares to an R2 value of 0.0449. The ligands form a very rough octahedron around the rhenium atom with Re—Cl(1), 2.441(3); Re—Cl(2), 2.366(3), Re—O(1), 1.684(7); Re—O(2), 1.896(6); Re—N(1), 2.144(7); Re—N(2), 2.132(7) Å. The pyridine rings are a dominant factor in determining the details of the molecular structure.


Sign in / Sign up

Export Citation Format

Share Document