scholarly journals Synthesis of Dimethyl Carbonate by Transesterification of Propylene Carbonate with Methanol on CeO2-La2O3 Oxides Prepared by the Soft Template Method

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4802
Author(s):  
Maria Giorgia Cutrufello ◽  
Luciano Atzori ◽  
Daniela Meloni ◽  
Alessandra Piras ◽  
Delia Gazzoli ◽  
...  

In this study, CeO2, La2O3, and CeO2-La2O3 mixed oxide catalysts with different Ce/La molar ratios were prepared by the soft template method and characterized by different techniques, including inductively coupled plasma atomic emission spectrometry, X-ray diffraction, N2 physisorption, thermogravimetric analysis, and Raman and Fourier transform infrared spectroscopies. NH3 and CO2 adsorption microcalorimetry was also used for assessing the acid and base surface properties, respectively. The behavior of the oxides as catalysts for the dimethyl carbonate synthesis by the transesterification of propylene carbonate with methanol, at 160 °C under autogenic pressure, was studied in a stainless-steel batch reactor. The activity of the catalysts was found to increase with an increase in the basic sites density. The formation of dimethyl carbonate was favored on medium-strength and weak basic sites, while it underwent decomposition on the strong ones. Several parasitic reactions occurred during the transformation of propylene carbonate, depending on the basic and acidic features of the catalysts. A reaction pathway has been proposed on the basis of the components identified in the reaction mixture.

2020 ◽  
Vol 86 (5) ◽  
pp. 16-21
Author(s):  
T. A. Karimova ◽  
G. L. Buchbinder ◽  
S. V. Kachin

Calibration by the concentration ratio provides better metrological characteristics compared to other calibration modes when using the inductively coupled plasma atomic emission spectrometry (ICP-AES) for analysis of geological samples and technical materials on their base. The main reasons for the observed improvement are: i) elimination of the calibration error of measuring vessels and the error of weighing samples of the analyzed materials from the total error of the analysis; ii) high intensity of the lines of base element; and iii) higher accuracy of measuring the ratio of intensities compared to that of measuring the absolute intensities. Calcium oxide is better suited as a base when using calibration by the concentration ratio in analysis of carbonate rocks, technical materials, slags containing less than 20% SiO2 and more than 20% CaO. An equation is derived to calculate the content of components determined in carbonate materials when using calibration by the concentration ratio. A method of ICP-AES with calibration by the concentration ratio is developed for determination of CaO (in the range of contents 20 – 100%), SiO2 (2.0 – 35%), Al2O3 (0.1 – 30%), MgO (0.1 – 20%), Fe2O3 (0.5 – 40%), Na2O (0.1 – 15%), K2O (0.1 – 5%), P2O5 (0.001 – 2%), MnO (0.01 – 2%), TiO2 (0.01 – 2.0%) in various carbonate materials. Acid decomposition of the samples in closed vessels heated in a HotBlock 200 system is proposed. Correctness of the procedure is confirmed in analysis of standard samples of rocks. The developed procedure was used during the interlaboratory analysis of the standard sample of slag SH17 produced by ZAO ISO (Yekaterinburg, Russia).


RSC Advances ◽  
2021 ◽  
Vol 11 (26) ◽  
pp. 15959-15968
Author(s):  
Guozheng Zhao ◽  
Hui Liang ◽  
Hongzhu Xu ◽  
Changbo Li ◽  
Qingwei Tan ◽  
...  

Ordered mesoporous Ag/CeO2 catalysts have been successfully synthesized by a microwave assisted soft template method.


Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 133
Author(s):  
Henryk R. Parzentny ◽  
Leokadia Róg

It is supposed that the determination of the content and the mode of occurrence of ecotoxic elements (EE) in feed coal play the most significant role in forecasting distribution of EE in the soil and plants in the vicinity of power stations. Hence, the aim of the work was to analyze the properties of the feed coal, the combustion residues, and the topsoil which are reached by EE together with dust from power stations. The mineral and organic phases, which are the main hosts of EE, were identified by microscopy, X-ray powder diffraction, inductively coupled plasma atomic emission spectrometry, and scanning electron microscope with an energy dispersive X-ray methods. The highest content of elements was observed in the Oi and Oe subhorizons of the topsoil. Their hosts are various types of microspheres and char, emitted by power stations. In the areas of long-term industrial activity, there are also sharp-edged grains of magnetite emitted in the past by zinc, lead, and ironworks. The enrichment of the topsoil with these elements resulted in the increase in the content of EE, by between 0.2 times for Co; and 41.0 times for Cd in the roots of Scots pine, common oak and undergrowth, especially in the rhizodermis and the primary cortex and, more seldom, in the axle roller and cortex cells.


Sign in / Sign up

Export Citation Format

Share Document