scholarly journals Pathways to Green Perspectives: Production and Characterization of Polylactide (PLA) Nanocomposites Filled with Superparamagnetic Magnetite Nanoparticles

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5154
Author(s):  
Marius Murariu ◽  
Armando Galluzzi ◽  
Yoann Paint ◽  
Oltea Murariu ◽  
Jean-Marie Raquez ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Surface Treatment ◽  
Water Repellent ◽  
Modern Approach ◽  
Melt Compounding ◽  
Characteristic Features ◽  
End Use ◽  
20 Nm ◽  
Superparamagnetic Properties

In the category of biopolymers, polylactide or polylactic acid (PLA) is one of the most promising candidates considered for future developments, as it is not only biodegradable under industrial composting conditions, but it is produced from renewable natural resources. The modification of PLA through the addition of nanofillers is considered as a modern approach to improve its main characteristic features (mechanical, thermal, barrier, etc.) and to obtain specific end-use properties. Iron oxide nanoparticles (NPs) of low dimension (10–20 nm) such as magnetite (Fe3O4), exhibit strong magnetization in magnetic field, are biocompatible and show low toxicity, and can be considered in the production of polymer nanocomposites requiring superparamagnetic properties. Accordingly, PLA was mixed by melt-compounding with 4–16 wt.% magnetite NPs. Surface treatment of NPs with a reactive polymethylhydrogensiloxane (MHX) was investigated to render the nanofiller water repellent, less sensitive to moisture and to reduce the catalytic effects at high temperature of iron (from magnetite) on PLA macromolecular chains. The characterization of nanocomposites was focused on the differences of the rheology and morphology, modification, and improvements in the thermal properties using surface treated NPs, while the superparamagnetic behavior was confirmed by VSM (vibrating sample magnetometer) measurements. The PLA−magnetite nanocomposites had strong magnetization properties at low magnetic field (values close to 70% of Mmax at H = 0.2 T), while the maximum magnetic signal (Mmax) was mainly determined by the loading of the nanofiller, without any significant differences linked to the surface treatment of MNPs. These bionanocomposites showing superparamagnetic properties, close to zero magnetic remanence, and coercivity, can be further produced at a larger scale by melt-compounding and can be designed for special end-use applications, going from biomedical to technical areas.

scholarly journals Thermal and Quasi-Static Mechanical Characterization of Polyamide 6-Graphene Nanoplatelets Composites

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1454
Author(s):  
Pietro Russo ◽  
Francesca Cimino ◽  
Antonio Tufano ◽  
Francesco Fabbrocino
Keyword(s):  
Chemical Resistance ◽  
Experimental Tests ◽  
Polyamide 6 ◽  
Graphene Nanoplatelets ◽  
Strength Parameter ◽  
Melt Compounding ◽  
Static Mechanical ◽  
Thermal And Electrical Properties ◽  
Multifunctional Products

The growing demand for lightweight and multifunctional products in numerous industrial fields has recently fuelled a growing interest in the development of materials based on polymer matrices including graphene-like particles, intrinsically characterized by outstanding mechanical, thermal, and electrical properties. Specifically, with regard to one of the main mass sectors, which is the automotive, there has been a significant increase in the use of reinforced polyamides for underhood applications and fuel systems thanks to their thermal and chemical resistance. In this frame, polyamide 6 (PA6) composites filled with graphene nanoplatelets (GNPs) were obtained by melt-compounding and compared in terms of thermal and mechanical properties with the neat matrix processed under the same condition. The results of the experimental tests have shown that the formulations studied so far offer slight improvements in terms of thermal stability but much more appreciable benefits regarding both tensile and flexural parameters with respect to the reference material. Among these effects, the influence of the filler content on the strength parameter is noteworthy. However, the predictable worsening of the graphene sheet dispersion for GNPs contents greater than 3%, as witnessed by scanning electron images of the tensile fractured sections of specimens, affected the ultimate performance of the more concentrated formulation.

scholarly journals Compositional, structural, and surface characterization of heat-treated halloysite samples: Influence of surface treatment on photochemical activity

2021 ◽  
Vol 212 ◽  
pp. 106222
Author(s):  
Balázs Zsirka ◽  
Veronika Vágvölgyi ◽  
Katalin Győrfi ◽  
Erzsébet Horváth ◽  
Róbert K. Szilágyi ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Surface Characterization ◽  
Photochemical Activity ◽  
Heat Treated

Aerodynamic Characterization of Transonic Turbine Vanes Optimized to Attenuate Rotor Forcing

2011 ◽  
Author(s):  
R. Puente ◽  
G. Paniagua ◽  
T. Verstraete
Keyword(s):  
High Efficiency ◽  
Prediction Method ◽  
Optimization Procedure ◽  
3D Design ◽  
Turbine Vanes ◽  
Turbine Vane ◽  
Loss Prediction ◽  
Transonic Turbine ◽  
Characteristic Features

A multi-objective optimization procedure is applied to the 3D design of a transonic turbine vane row, considering efficiency and stator outlet pressure distortion, which is directly related to induced rotor forcing. The characteristic features that define different individuals along the Pareto Front are described, analyzing the differences between high efficiency airfoils and low interaction. Pressure distortion is assessed by means of a model that requires only of the computation the steady flow field in the domain of the stator. The reduction of aerodynamic rotor forcing is checked via unsteady multistage aerodynamic computations. A well known loss prediction method is used to drive the efficiency of one optimization run, while CFD analysis is used for another, in order to assess the reliability of both methods. In both cases, the decomposition of total losses is performed to quantify the influence on efficiency of reducing rotor forcing. Results show that when striving for efficiency, the rotor is affected by few, but intense shocks. On the other hand, when the objective is the minimization of distortion, multiple shocks will appear.

Fabrication and characterization of highly textured (Bi,Pb)2Sr2Ca2Cu3Ox superconducting ceramics using high magnetic field and cold isostatic pressing

1995 ◽  
Vol 10 (10) ◽  
pp. 2433-2443 ◽  
Author(s):  
Wai Lo ◽  
R. Stevens ◽  
R. Doyle ◽  
A.M. Campbell ◽  
W.Y. Liang
Keyword(s):  
Magnetic Field ◽  
Electron Microscopy ◽  
Cold Isostatic Pressing ◽  
Sintered Ceramic ◽  
Grain Alignment ◽  
Isostatic Pressing ◽  
Transmission Electron ◽  
Superconducting Ceramics ◽  
High Degree

High textured (Bi,Pb)2Sr2Ca2Cu3Ox ceramics have been fabricated by aligning deflocculated flakes of (Bi,Pb)2Sr2Ca2Cu3Ox suspended in an organic medium by means of a high de magnetic field (6 T) at room temperature followed by cold isostatic pressing. The proportion of the (Bi,Pb)2Sr2Ca2Cu3Ox phase in the precursor powder was carefully controlled, and the characteristics of the powder, such as size distribution and morphology, were determined. A high degree of grain alignment was found in the specimens after the magnetic alignment, although the bulk density of the materials was low. Cold isostatic pressing substantially increased the density of the magnetically prealigned specimens which also resulted in a slight decrease in the degree of grain alignment. This minor realignment was found to be due to the various kinds of processing defects that appeared in the specimens during compaction due to the grinding and cracking of the grains and their interlocking. The microstructural and superconducting properties of the sintered ceramic have been studied using texture goniometry, high resolution scanning electron microscopy, transmission electron microscopy, ac magnetic susceptometry, and critical current measurements.

scholarly journals Compton and Raman free electron laser stability properties for a cold electron beam propagating through a helical magnetic wiggler

1985 ◽  
Vol 33 (3) ◽  
pp. 387-423 ◽  
Author(s):  
John A. Davies ◽  
Ronald C. Davidson ◽  
George L. Johnston
Keyword(s):  
Magnetic Field ◽  
Electron Beam ◽  
Dispersion Relation ◽  
Free Electron ◽  
Free Electron Laser ◽  
Relativistic Electron Beam ◽  
Cold Electron ◽  
Wiggler Magnetic Field ◽  
Laser Stability

This paper gives an extensive characterization of the range of validity of the Compton and Raman approximations to the exact free electron laser dispersion relation for a cold, relativistic electron beam propagating through a constantamplitude helical wiggler magnetic field. The electron beam is treated as infinite in transverse extent. Specific properties of the exact and approximate dispersion relations are investigated analytically and numerically. In particular, a detailed numerical analysis is carried out to determine the range of validity of the Compton approximation.

Magnetic field characterization of Macolod Corridor (Luzon, Philippines): New perspectives on rifting in a volcanic arc setting

2021 ◽  
pp. 229179
Author(s):  
Rurik S.P. Austria ◽  
Nathaniel E. Parcutela ◽  
Edd Marc L. Reyes ◽  
Leo T. Armada ◽  
Carla B. Dimalanta ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Volcanic Arc ◽  
Arc Setting

Analysis and Characterization of Solid and Liquid Organic Fertilizer from Hydrothermal Carbonization (HTC) of Chicken Feather and Blood Waste

2021 ◽  
Vol 21 (3) ◽  
pp. 651
Author(s):  
Agus Kuncaka ◽  
Rizky Ibnufaatih Arvianto ◽  
Almas Shafira Ramadhanty Bunga Latifa ◽  
Munawir Ramadhan Rambe ◽  
Adhitasari Suratman ◽  
...  
Keyword(s):  
Iron Content ◽  
Solid Phase ◽  
Organic Fertilizer ◽  
Liquid Product ◽  
Hydrothermal Carbonization ◽  
Mass Ratio ◽  
Solid Product ◽  
Chicken Waste ◽  
20 Nm

Conversion of feather and blood from chicken slaughterhouse waste for producing solid and liquid organic fertilizer excluding composting process with a variation of the mass ratio of feather and blood of a chicken has been conducted. The nitrogen, sulfur, and iron content in the solid and liquid product of the hydrothermal carbonization process were analyzed to identify and characterize the possibility of hydrolysate as a source of nitrogen, sulfur, and iron in soil fertilizer. Feather and blood of chicken waste were introduced to a hydrothermal carbonization reactor with the addition of limestone at a temperature range of 160–170 °C for the preparation of solid and liquid organic fertilizer. According to the FTIR interpretation, the solid product had functional groups such as NH, OH, CH sp3, SH, C=O, C=C, C–O–C, and C–H aromatic. The nitrogen, sulfur, and iron content of the optimal ratio in the solid phase were 4.67%, 1.63%, and 3694.56 ppm, while their contents in the liquid fertilizer were 3.76%, 1.80%, and 221.56 ppm, respectively. The vibration of 478 cm–1 is attributed to Fe–O paramagnetic (Fe2O3) confirmed by TEM images showed the diameter size less than 20 nm indicating the presence of superparamagnetic material.

Sign in / Sign up

Export Citation Format

Share Document