scholarly journals Pencil Graphite Electrodes Decorated with Platinum Nanoparticles as Efficient Electrocatalysts for Hydrogen Evolution Reaction

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 73
Author(s):  
Lorena-Cristina Balint ◽  
Iosif Hulka ◽  
Andrea Kellenberger

Platinum-based materials are widely known as the most utilized and advanced catalysts for hydrogen evolution reaction. For this reason, several studies have reported alternative methods of incorporating this metal into more economical electrodes with a carbon-based support material. Herein, we report on the performance of pencil graphite electrodes decorated with electrochemically deposited platinum nanoparticles as efficient electrocatalysts for hydrogen evolution reaction. The electrodeposition of platinum was performed via pulsed current electrodeposition and the effect of current density on the electrocatalytic activity was investigated. The obtained electrodes were characterized using cyclic voltammetry, while the electrocatalytic activity was assessed through linear sweep voltammetry. Field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy were utilised to gain an insight into surface morphology and chemical analysis of platinum nanoparticles. The best performing electrocatalyst, at both low and high current densities, was characterized by the highest exchange current density of 1.98 mA cm−2 and an ultralow overpotential of 43 mV at a current density of 10 mA cm−2. The results show that, at low current densities, performances closest to that of platinum can be achieved even with an ultralow loading of 50 µg cm−2 Pt.

2019 ◽  
Vol 55 (65) ◽  
pp. 9665-9668 ◽  
Author(s):  
Quan Zhang ◽  
Fang Luo ◽  
Hao Hu ◽  
Ruizhi Xu ◽  
Konggang Qu ◽  
...  

W/W2C heterostructured nanoparticles encapsulated by N,P dual-doped carbon require low overpotentials of 55 mV and 82 mV vs. RHE to achieve cathodic current density of 10 mA cm−2 in acidic and alkaline electrolytes, respectively.


2020 ◽  
Vol 8 (44) ◽  
pp. 23323-23329
Author(s):  
Jing Hu ◽  
Siwei Li ◽  
Yuzhi Li ◽  
Jing Wang ◽  
Yunchen Du ◽  
...  

Crystalline–amorphous Ni–Ni(OH)2 core–shell assembled nanosheets exhibit outstanding electrocatalytic activity and stability for hydrogen evolution under alkaline conditions.


2021 ◽  
Author(s):  
Zihao Liu ◽  
Shifeng Li ◽  
Fangfang Wang ◽  
Mingxia Li ◽  
Yonghong Ni

FeNi-layered double hydroxide (LDH) is thought to be an excellent electrocatalyst for oxygen evolution reaction (OER), but it always shows extremely poor electrocatalytic activity toward hydrogen evolution reaction (HER) in...


2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Pengyuan Wu ◽  
Gangyong Sun ◽  
Yuanzhi Chen ◽  
Wanjie Xu ◽  
Hongfei Zheng ◽  
...  

ACS Nano ◽  
2021 ◽  
Vol 15 (2) ◽  
pp. 2643-2653 ◽  
Author(s):  
Jean-François Lemineur ◽  
Paolo Ciocci ◽  
Jean-Marc Noël ◽  
Hongxin Ge ◽  
Catherine Combellas ◽  
...  

Small ◽  
2021 ◽  
Vol 17 (6) ◽  
pp. 2006770
Author(s):  
Zhongke Wang ◽  
Shengyan Wang ◽  
Lixia Ma ◽  
Yingjie Guo ◽  
Jie Sun ◽  
...  

Crystals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1040 ◽  
Author(s):  
Getachew Solomon ◽  
Raffaello Mazzaro ◽  
Vittorio Morandi ◽  
Isabella Concina ◽  
Alberto Vomiero

Molybdenum sulfide (MoS2) has emerged as a promising catalyst for hydrogen evolution applications. The synthesis method mainly employed is a conventional hydrothermal method. This method requires a longer time compared to other methods such as microwave synthesis methods. There is a lack of comparison of the two synthesis methods in terms of crystal morphology and its electrochemical activities. In this work, MoS2 nanosheets are synthesized using both hydrothermal (HT-MoS2) and advanced microwave methods (MW-MoS2), their crystal morphology, and catalytical efficiency towards hydrogen evolution reaction (HER) were compared. MoS2 nanosheet is obtained using microwave-assisted synthesis in a very short time (30 min) compared to the 24 h hydrothermal synthesis method. Both methods produce thin and aggregated nanosheets. However, the nanosheets synthesized by the microwave method have a less crumpled structure and smoother edges compared to the hydrothermal method. The as-prepared nanosheets are tested and used as a catalyst for hydrogen evolution results in nearly similar electrocatalytic performance. Experimental results showed that: HT-MoS2 displays a current density of 10 mA/cm2 at overpotential (−280 mV) compared to MW-MoS2 which requires −320 mV to produce a similar current density, suggesting that the HT-MoS2 more active towards hydrogen evolutions reaction.


Sign in / Sign up

Export Citation Format

Share Document