scholarly journals Transport and Electrochemical Characteristics of CJMCED Homogeneous Cation Exchange Membranes in Sodium Chloride, Calcium Chloride, and Sodium Sulfate Solutions

Membranes ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 165
Author(s):  
Veronika Sarapulova ◽  
Natalia Pismenskaya ◽  
Dmitrii Butylskii ◽  
Valentina Titorova ◽  
Yaoming Wang ◽  
...  

Recently developed and produced by Hefei Chemjoy Polymer Material Co. Ltd., homogeneous CJMC-3 and CJMC-5 cation-exchange membranes (CJMCED) are characterized. The membrane conductivity in NaCl, Na2SO4, and CaCl2 solutions, permeability in respect to the NaCl and CaCl2 diffusion, transport numbers, current–voltage curves (CVC), and the difference in the pH (ΔpH) of the NaCl solution at the desalination compartment output and input are examined for these membranes in comparison with a well-studied commercial Neosepta CMX cation-exchange membrane produced by Astom Corporation, Japan. It is found that the conductivity, CVC (at relatively low voltages), and water splitting rate (characterized by ΔpH) for both CJMCED membranes are rather close to these characteristics for the CMX membrane. However, the diffusion permeability of the CJMCED membranes is significantly higher than that of the CMX membrane. This is due to the essentially more porous structure of the CJMCED membranes; the latter reduces the counterion permselectivity of these membranes, while allowing much easier transport of large ions, such as anthocyanins present in natural dyes of fruit and berry juices. The new membranes are promising for use in electrodialysis demineralization of brackish water and natural food solutions.

1989 ◽  
Vol 41 ◽  
pp. 143-153 ◽  
Author(s):  
M. Suhara ◽  
K. Suzuki ◽  
H. Horie ◽  
T. Shimohira

1988 ◽  
Vol 42a ◽  
pp. 698-701 ◽  
Author(s):  
T. Ojala ◽  
K. Kontturi ◽  
Sylvia Gobom ◽  
Christian Rømming ◽  
Leiv K. Sydnes ◽  
...  

2021 ◽  
Vol 29 (4) ◽  
Author(s):  
Mohammed Qader Gubari ◽  
Haider Mohammed Zwain ◽  
Nadezda Vyacheslavovna Alekseeva

Cation exchange membrane (MK-40) is a commercial membrane with a fixed group that is an important part of the electrodialysis (ED) process. Sodium chloride (NaCl) diffusion and osmotic permeability for MK-40 was studied. A cell containing two compartments was used to analyse the properties of the MK-40 membrane fixed between them. Furthermore, the influence of temperature, NaCl concentration, and operating time on MK-40 properties was investigated. The results showed that the highest diffusion permeability coefficient of NaCl was 7.37×10-9 (m2/s), and the maximum osmotic permeability coefficient of distilled water was 43.8×10-9 (m2/s) at NaCl solution concentration of 0.1 M and 50oC. Generally, the permeability was constant beyond 60 min of operational time. Additionally, the minimum diffusion permeability coefficients of the MK-40 membrane fell by about 22% over time when the concentration of NaCl solution was 1 M at 25oC. To conclude, membrane properties in the ED process depend on the two electrodes (a cathode and an anode), without the diffusion of salts particles. Meanwhile, the most important properties of cation exchange membranes (CEMs) used in electrodialysis are increased membrane efficiency when water and salts transport decrease through CEMs, which leads to a decrease in energy consumption. Thus, the MK-40 membrane showed a good properties due to its low diffusion permeability for concentrated NaCl solution at elevated temperatures and minimum reduction in diffusion permeability of concentrated NaCl solution over time.


Sign in / Sign up

Export Citation Format

Share Document