scholarly journals Elucidating the Effect of Additive Friction Stir Deposition on the Resulting Microstructure and Mechanical Properties of Magnesium Alloy WE43

Metals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1739
Author(s):  
M. B. Williams ◽  
T. W. Robinson ◽  
C. J. Williamson ◽  
R. P. Kinser ◽  
N. A. Ashmore ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Magnesium Alloy ◽  
Surface Defects ◽  
Processing Parameters ◽  
Process Window ◽  
Structure Property ◽  
Friction Stir ◽  
Microstructure And Mechanical Properties ◽  
Alloy We43 ◽  
Relationship Of

In this work, the effect of processing parameters on the resulting microstructure and mechanical properties of magnesium alloy WE43 processed via Additive Friction Stir Deposition (AFSD), a nascent solid-state additive manufacturing (AM) process, is investigated. In particular, a parameterization study was carried out, using multiple four-layer deposits, to identify a suitable process window for a structural 68-layers bulk WE43 deposition. The parametric study identified an acceptable set of parameters with minimal surface defects and excellent consolidation for the fabrication of a bulk WE43 deposition. Microstructural, tensile, and fatigue life characterization was conducted on the bulk WE43 deposition and compared to commercially available wrought material to elucidate the process-structure-property-performance (PSPP) relationship of the AFSD process. This study shows that the bulk WE43 deposit exhibited a refined homogenous microstructure and a texture shift relative to the wrought material. However, a reduction in hardness and tensile behavior was observed in the as-deposited WE43 compared to the wrought control. Additionally, fatigue specimens extracted from the bulk deposition exhibited a decrease in life in the low-cycle regime but performed comparably to the wrought plate in the high-cycle regime. The outcomes of this study illustrate the potential of the AFSD process in additively manufactured structural load-bearing components made with magnesium alloy WE43 in the as-built condition.

Dissimilar Friction Stir Lap Welding of AA2198 and AA7075 Sheets: Forces, Microstructure and Mechanical Properties

2021 ◽  
Author(s):  
Antonello Astarita ◽  
Fausto Tucci ◽  
Alessia Teresa Silvestri ◽  
Michele Perrella ◽  
Luca Boccarusso ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Welding Process ◽  
Processing Parameters ◽  
Processing Parameter ◽  
Friction Stir Lap Welding ◽  
Friction Stir ◽  
Lap Shear ◽  
Microstructure And Mechanical Properties ◽  
Lap Welding ◽  
Factorial Design Of Experiments

Abstract This paper deals with the dissimilar friction stir lap welding of AA2198 and AA7075 sheets. The influence of processing parameters, namely welding speed and tool rotational speed on joint features, microstructure, and mechanical properties were investigated implementing a full factorial design of experiments. During the welding process, axial and transversal forces were continuously measured using a dedicated sensed fixture aiming at the correlation of this processing parameter with the quality of the achieved joints. The reported outcomes showed a very narrow processing window in which it was possible to avoid the formation of defects while the formation of an hook was observed for all the joints welded. The influence of the weld bead morphology on the lap shear strength was elucidated proving that the strength is ruled by the hook morphology. A correlation between the process parameters and the forces arising was also attempted. The final microstructure of the joints was studied and explained and also compared with the microhardness results.

Sign in / Sign up

Export Citation Format

Share Document