scholarly journals A Dual-Band High-Gain Subwavelength Cavity Antenna with Artificial Magnetic Conductor Metamaterial Microstructures

Micromachines ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 58
Author(s):  
Guang Lu ◽  
Fabao Yan ◽  
Kaiyuan Zhang ◽  
Yunpeng Zhao ◽  
Lei Zhang ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
High Gain ◽  
Resonant Wavelength ◽  
Circuit Board ◽  
Dual Band ◽  
Dual Frequency ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Low Profile ◽  
Unit Cells

This paper presents dual-band high-gain subwavelength cavity antennas with artificial magnetic conductor (AMC) metamaterial microstructures. We developed an AMC metamaterial plate that can be equivalent to mu-negative metamaterials (MNMs) at two frequencies using periodic microstructure unit cells. A cavity antenna was constructed using the dual-band AMC metamaterial plate as the covering layer and utilizing a feed patch antenna with slot loading as the radiation source. The antenna was fabricated with a printed circuit board (PCB) process and measured in an anechoic chamber. The |S11| of the antenna was −26.8 dB and −23.2 dB at 3.75 GHz and 5.66 GHz, respectively, and the realized gain was 15.2 dBi and 18.8 dBi at two resonant frequencies. The thickness of the cavity, a sub-wavelength thickness cavity, was 15 mm, less than one fifth of the long resonant wavelength and less than one third of the short resonant wavelength. This new antenna has the advantages of low profile, light weight, dual-frequency capability, high gain, and easy processing.

scholarly journals A Low-Profile High-Gain and Wideband Log-Periodic Meandered Dipole Array Antenna with a Cascaded Multi-Section Artificial Magnetic Conductor Structure

Sensors ◽  
2019 ◽  
Vol 19 (20) ◽  
pp. 4404 ◽  
Author(s):  
Son Trinh-Van ◽  
Oh Heon Kwon ◽  
Euntae Jung ◽  
Jinwoo Park ◽  
Byunggil Yu ◽  
...  
Keyword(s):  
High Gain ◽  
Operating Frequency ◽  
Main Beam ◽  
Impedance Bandwidth ◽  
Beam Direction ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Low Profile ◽  
Operating Bandwidth ◽  
Meander Line

This paper presents a low-profile log-periodic meandered dipole array (LPMDA) antenna with wideband and high gain characteristics. The antenna consists of 14 dipole elements. For compactness, a meander line structure is applied to each dipole element to reduce its physical length. As a result, a compact and wideband LPMDA antenna is realized, exhibiting a wide impedance bandwidth of 1.04–5.22 GHz (ratio bandwidth of 5.02:1) for | S 11| < −10 dB. To enhance the antenna gain performance while maintaining the wideband behavior, the LPMDA antenna is integrated with a new design of an artificial magnetic conductor (AMC) structure. The designed AMC is realized by combining three AMC structures of different sizes to form a cascaded multi-section AMC structure, of which its overall operating bandwidth can continuously cover the entire impedance bandwidth of the LPMDA antenna. The proposed AMC-backed LPMDA antenna is experimentally verified and its measured −10 dB reflection bandwidth is found to be in the range of 0.84–5.15 GHz (6.13:1). At the main beam direction within the operating frequency bandwidth, the gain of the proposed AMC-backed LPMDA antenna ranges from 7.15–11.43 dBi, which is approximately 4 dBi higher than that of an LPMDA antenna without an AMC. Moreover, the proposed antenna has a low profile of only 0.138 λ L. ( λ L is the free-space wavelength at the lowest operating frequency).

scholarly journals A Compact, Low-Profile Log-Periodic Meandered Dipole Array Antenna with an Artificial Magnetic Conductor

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Oh Heon Kwon ◽  
Sungwoo Lee ◽  
Jong Min Lee ◽  
Keum Cheol Hwang
Keyword(s):  
Ground Plane ◽  
Array Antenna ◽  
Main Beam ◽  
Beam Direction ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Line Configuration ◽  
Low Profile ◽  
Unit Cells ◽  
Meander Line

A compact and low-profile log-periodic meandered dipole array (LPMDA) antenna with an artificial magnetic conductor (AMC) is proposed. For compactness, a meander line configuration is implemented with dipole elements and optimized using a genetic algorithm (GA) to realize the LPMDA antenna. As a result, a size reduction of approximately 30% is achieved as compared to a conventional log-periodic dipole array antenna. To enhance the gain characteristics, the AMC ground plane configuration is realized with 9 × 9 unit cells for the LPMDA antenna. Two prototypes of the proposed LPMDA antennas with and without an AMC are fabricated and measured to verify its performance. The measured −10 dB reflection ratio bandwidths are 2.56 : 1 (0.85–2.18 GHz) and 2.34 : 1 (0.92–2.16 GHz) for the proposed LPMDA antennas with and without the AMC, respectively. The gain at the main beam direction within the operating frequency bandwidth is significantly improved from 3.94–7.17 dBi to 7.86–10.01 dBi by applying the AMC.

scholarly journals A Dual Band Slotted Patch Antenna on Dielectric Material Substrate

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
M. Habib Ullah ◽  
M. T. Islam ◽  
M. R. Ahsan ◽  
J. S. Mandeep ◽  
N. Misran
Keyword(s):  
Patch Antenna ◽  
Printed Circuit Board ◽  
Dielectric Material ◽  
Circuit Board ◽  
Dual Band ◽  
Polymer Resin ◽  
Full Wave ◽  
Low Profile ◽  
Gain Variation ◽  
Satellite Applications

A low profile, compact dual band slotted patch antenna has been designed using finite element method-based high frequency full-wave electromagnetic simulator. The proposed antenna fabricated using LPKF printed circuit board (PCB) fabrication machine on fiberglass reinforced epoxy polymer resin material substrate and the performance of the prototype has been measured in a standard far-field anechoic measurement chamber. The measured impedance bandwidths of (reflection coefficient<-10 dB) 12.26% (14.3–16.2 GHZ), 8.24% (17.4–18.9 GHz), and 3.08% (19.2–19.8) have been achieved through the proposed antenna prototype. 5.9 dBi, 3.37 dBi, and 3.32 dBi peak gains have been measured and simulated radiation efficiencies of 80.3%, 81.9%, and 82.5% have been achieved at three resonant frequencies of 15.15 GHz, 18.2 GHz, and 19.5 GHz, respectively. Minimum gain variation, symmetric, and almost steady measured radiation pattern shows that the proposed antenna is suitable for Ku and K band satellite applications.

Low profile dual‐band antenna loaded with artificial magnetic conductor for indoor radar systems

2015 ◽  
Vol 9 (2) ◽  
pp. 184-190 ◽  
Author(s):  
Sen Yan ◽  
Ping Jack Soh ◽  
Marco Mercuri ◽  
Dominique M.M.‐P. Schreurs ◽  
Guy A.E. Vandenbosch
Keyword(s):  
Dual Band ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Dual Band Antenna ◽  
Radar Systems ◽  
Low Profile

A low‐profile dual‐band shared‐aperture antenna based on artificial magnetic conductor with transparent elements

2020 ◽  
Vol 62 (11) ◽  
pp. 3571-3575
Author(s):  
Alexander P. Volkov ◽  
Vitalii V. Kakshin ◽  
Igor Yu. Ryzhov ◽  
Kirill V. Kozlov ◽  
Alexander P. Kurochkin ◽  
...  
Keyword(s):  
Dual Band ◽  
Aperture Antenna ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Low Profile

A wideband, compact, high gain, low-profile, monopole antenna using wideband artificial magnetic conductor for off-body communications

2021 ◽  
pp. 1-10
Author(s):  
Bidisha Hazarika ◽  
Banani Basu ◽  
Arnab Nandi
Keyword(s):  
High Gain ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Reflection Phase ◽  
Low Profile ◽  
Independent Behavior ◽  
Integrated Antenna ◽  
Body Loading

Abstract A wideband staircase pattern defected ground monopole antenna integrated with an artificial magnetic conductor (AMC) reflector has been proposed for C-band (4–8 GHz) and ITU band (8.01–8.5 GHz) applications. The integrated antenna consists of a staircase antenna at top, a 2 × 2 AMC reflector at the bottom and an air substrate as gap between them. The AMC offers 18.5% ± 90° reflection phase bandwidth from 6.10 to 7.32 GHz. The AMC layer has achieved mu-negative properties in the designated band. The AMC proffers polarization independent behavior in the respective frequency band depicting robustness in AMC reflection phase characteristics. The integrated antenna has offered a wide impedance bandwidth of 2.78 GHz (42.8% at 6.5 GHz and 34.1% at 8.15 GHz) due to the defected ground monopole. The integration of wideband AMC beneath the staircase monopole antenna alters the out of phase radiation to in-phase planer pattern which enhances the peak gain up to 9.7 dB. It reduces the 1-g averaged specific absorption rate to 0.223 and 0.324 W/kg at the two designated bands. The structure maintains almost similar bandwidth and gain due to artificial human body loading.

scholarly journals Broadband metasurfaces loaded with non-Foster elements

2021 ◽  
Vol 2015 (1) ◽  
pp. 012061
Author(s):  
Nikita Kalmykov ◽  
Bair Buiantuev ◽  
Dmitry Kholodnyak
Keyword(s):  
Frequency Band ◽  
Conversion Error ◽  
Magnetic Conductor ◽  
Bandwidth Extension ◽  
Artificial Magnetic Conductor ◽  
Low Profile ◽  
Low Profile Antennas ◽  
Unit Cells ◽  
Operational Frequency ◽  
Impedance Converter

Abstract Metasurfaces have been widely used to design low-profile antennas, thin absorbers, lenses etc. The operational frequency band of a metasurface is rather narrow due to its resonant nature. Loading metasurface unit cells with non-Foster elements allows for remarkable bandwidth extension. In this paper, design of a broadband metasurface to operate as an artificial magnetic conductor is considered. The main issues which influence the bandwidth extension such as implementation of the non-Foster load, minimization of conversion error of a negative impedance converter, and circuit stabilization are addressed.

Sign in / Sign up

Export Citation Format

Share Document