scholarly journals Carbon and Neon Ion Bombardment Induced Smoothing and Surface Relaxation of Titania Nanotubes

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2458
Author(s):  
Astrid Kupferer ◽  
Michael Mensing ◽  
Jan Lehnert ◽  
Stephan Mändl ◽  
Stefan Mayr

Titania nanotube arrays with their enormous surface area are the subject of much attention in diverse fields of research. In the present work, we show that not only 60 keV and 150 keV ion bombardment of amorphous titania nanotube arrays yields defect creation within the tube walls, but it also changes the surface morphology: the surface relaxes and smoothens in accordance with a curvature-driven surface material’s transport mechanism, which is mediated by radiation-induced viscous flow or radiation-enhanced surface diffusion, while the nanotubes act as additional sinks for the particle surface currents. These effects occur independently of the ion species: both carbon and neon ion bombardments result in comparable surface relaxation responses initiated by an ion energy of 60 keV at a fluence of 1 × 1016 ions/cm2. Using atomic force microscopy and contact angle measurements, we thoroughly study the relaxation effects on the surface topography and surface free energy, respectively. Moreover, surface relaxation is accompanied by further amorphization in surface-near regions and a reduction in the mass density, as demonstrated by Raman spectroscopy and X-ray reflectivity. Since ion bombardment can be performed on global and local scales, it constitutes a versatile tool to achieve well-defined and tunable topographies and distinct surface characteristics. Hence, different types of nanotube arrays can be modified for various applications.

2010 ◽  
Vol 43 (18) ◽  
pp. 2809-2822 ◽  
Author(s):  
T. G. Satheesh Babu ◽  
P. V. Suneesh ◽  
T. Ramachandran ◽  
Bipin Nair

2011 ◽  
Vol 284-286 ◽  
pp. 791-795 ◽  
Author(s):  
Shi Pu Li ◽  
Shi Wei Lin ◽  
Jian Jun Liao ◽  
Dan Hong Li ◽  
Yang Cao ◽  
...  

Titania nanotube arrays were fabricated in deionize water and glycerol mixed electrolyte containing a certain amount of NH4F. Three different polishing methods were used for pretreatment of Ti substrates: polished by hand with abrasive paper, by polishing machine, or by chemical polishing fluid (HF:HNO3=1:4, in volumetric ratio). The morphology of three different samples were imaged by scanning electron microscopy, and their photoelectrical properties were studied as well. Experimental results showed that Titania nanotube arrays grown on the Ti substrate and polished by polishing fluid has highly-ordered and well-defined nanotube structure. The effects of anodization potential and duration on synthesis of highly-ordered TiO2nanotubes were also studied in this paper. Both the layer thickness and nanotube diameter linearly increase with the increasing potential. The layer thickness also increases with prolongation of anodization time. By optimizing the preparation conditions, we can successfully control the geometrical structure of TiO2nanotube arrays with diameters in the range between 50 and 200 nm and the layer thickness between 800 and 2000 nm.


Sign in / Sign up

Export Citation Format

Share Document