scholarly journals In Vivo Investigation into Effectiveness of Fe3O4/PLLA Nanofibers for Bone Tissue Engineering Applications

Polymers ◽  
2018 ◽  
Vol 10 (7) ◽  
pp. 804 ◽  
Author(s):  
Wei-Yi Lai ◽  
Sheng-Wei Feng ◽  
Ya-Hui Chan ◽  
Wei-Jen Chang ◽  
Hsin-Ta Wang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Animal Experiments ◽  
Engineering Applications ◽  
Neat Plla ◽  
Electrospinning Method ◽  
Quantitative Results ◽  
Histological Results

Fe3O4 nanoparticles were loaded into poly-l-lactide (PLLA) with concentrations of 2% and 5%, respectively, using an electrospinning method. In vivo animal experiments were then performed to evaluate the potential of the Fe3O4/PLLA nanofibrous material for bone tissue engineering applications. Bony defects with a diameter of 4 mm were prepared in rabbit tibias. Fe3O4/PLLA nanofibers were grafted into the drilled defects and histological examination and computed tomography (CT) image detection were performed after an eight-week healing period. The histological results showed that the artificial bony defects grafted with Fe3O4/PLLA nanofibers exhibited a visibly higher bone healing activity than those grafted with neat PLLA. In addition, the quantitative results from CT images revealed that the bony defects grafted with 2% and 5% Fe3O4/PLLA nanofibers, respectively, showed 1.9- and 2.3-fold increases in bone volume compared to the control blank sample. Overall, the results suggest that the Fe3O4/PLLA nanofibers fabricated in this study may serve as a useful biomaterial for future bone tissue engineering applications.

Self-Assembled Biomimetic Scaffolds for Bone Tissue Engineering

2016 ◽  
pp. 104-132
Author(s):  
Ozan Karaman ◽  
Cenk Celik ◽  
Aylin Sendemir Urkmez
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Donor Site ◽  
Donor Site Morbidity ◽  
Engineering Applications ◽  
Temporal Regulation ◽  
Biomimetic Scaffolds ◽  
Self Assembled

Cranial, maxillofacial, and oral fractures, as well as large bone defects, are currently being treated by auto- and allograft procedures. These techniques have limitations such as immune response, donor-site morbidity, and lack of availability. Therefore, the interest in tissue engineering applications as replacement for bone graft has been growing rapidly. Typical bone tissue engineering models require a cell-supporting scaffold in order to maintain a 3-dimensional substrate mimicking in vivo extracellular matrix for cells to attach, proliferate and function during the formation of bone tissue. Combining the understanding of molecular and structural biology with materials engineering and design will enable new strategies for developing biological tissue constructs with clinical relevance. Self-assembled biomimetic scaffolds are especially suitable as they provide spatial and temporal regulation. Specifically, self-assembling peptides capable of in situ gelation serve as attractive candidates for minimally invasive injectable therapies in bone tissue engineering applications.

scholarly journals In vitro and in vivo Biocompatibility of Alginate Dialdehyde/Gelatin Hydrogels with and without Nanoscaled Bioactive Glass for Bone Tissue Engineering Applications

Materials ◽  
2014 ◽  
Vol 7 (3) ◽  
pp. 1957-1974 ◽  
Author(s):  
Ulrike Rottensteiner ◽  
Bapi Sarker ◽  
Dominik Heusinger ◽  
Diana Dafinova ◽  
Subha Rath ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bioactive Glass ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Engineering Applications

scholarly journals In vivo engineering of a human vasculature for bone tissue engineering applications

2008 ◽  
Vol 13 (9b) ◽  
pp. 3380-3386 ◽  
Author(s):  
Lilian Steffens ◽  
Andreas Wenger ◽  
G. Björn Stark ◽  
Günter Finkenzeller
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Engineering Applications

scholarly journals Plant-derived Cellulose Scaffolds for Bone Tissue Engineering

2020 ◽  
Author(s):  
Maxime Leblanc Latour ◽  
Maryam Tarar ◽  
Ryan J. Hickey ◽  
Charles M. Cuerrier ◽  
Isabelle Catelas ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Pore Size ◽  
Bone Tissue ◽  
Structural Features ◽  
Osteogenic Potential ◽  
Engineering Applications ◽  
Alizarin Red

AbstractPlant-derived cellulose biomaterials have recently been utilized in several tissue engineering applications. Naturally-derived cellulose scaffolds have been shown to be highly biocompatible in vivo, possess structural features of relevance to several tissues, as well as support mammalian cell invasion and proliferation. Recent work utilizing decellularized apple hypanthium tissue has shown that it possesses a pore size and properties similar to trabecular bone. In the present study, we examined the potential of apple-derived cellulose scaffolds for bone tissue engineering (BTE). Confocal microscopy revealed that the scaffolds had a suitable pore size for BTE applications. To analyze their in vitro mineralization potential, MC3T3-E1 pre-osteoblasts were seeded in either bare cellulose scaffolds or in composite scaffolds composed of cellulose and collagen I. Following chemically-induced differentiation, scaffolds were mechanically tested and evaluated for mineralization. The Young’s modulus of both types of scaffolds significantly increased after cell differentiation. Alkaline phosphatase and Alizarin Red staining further highlighted the osteogenic potential of the scaffolds. Histological sectioning of the constructs revealed complete invasion by the cells and mineralization throughout the entire constructs. Finally, scanning electron microscopy demonstrated the presence of mineral aggregates deposited on the scaffolds after differentiation, and energy-dispersive spectroscopy confirmed the presence of phosphate and calcium. In summary, our results indicate that plant-derived cellulose is a promising scaffold candidate for bone tissue engineering applications.

scholarly journals Development of an angiogenesis-promoting microvesicle-alginate-polycaprolactone composite graft for bone tissue engineering applications

PeerJ ◽  
2016 ◽  
Vol 4 ◽  
pp. e2040 ◽  
Author(s):  
Hui Xie ◽  
Zhenxing Wang ◽  
Liming Zhang ◽  
Qian Lei ◽  
Aiqi Zhao ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Bone Tissue ◽  
Umbilical Vein ◽  
Composite Graft ◽  
Electron Microscopic ◽  
Engineering Applications

One of the major challenges of bone tissue engineering applications is to construct a fully vascularized implant that can adapt to hypoxic environments in vivo. The incorporation of proangiogenic factors into scaffolds is a widely accepted method of achieving this goal. Recently, the proangiogenic potential of mesenchymal stem cell-derived microvesicles (MSC-MVs) has been confirmed in several studies. In the present study, we incorporated MSC-MVs into alginate-polycaprolactone (PCL) constructs that had previously been developed for bone tissue engineering applications, with the aim of promoting angiogenesis and bone regeneration. MSC-MVs were first isolated from the supernatant of rat bone marrow-derived MSCs and characterized by scanning electron microscopic, confocal microscopic, and flow cytometric analyses. The proangiogenic potential of MSC-MVs was demonstrated by the stimulation of tube formation of human umbilical vein endothelial cellsin vitro. MSC-MVs and osteodifferentiated MSCs were then encapsulated with alginate and seeded onto porous three-dimensional printed PCL scaffolds. When combined with osteodifferentiated MSCs, the MV-alginate-PCL constructs enhanced vessel formation and tissue-engineered bone regeneration in a nude mouse subcutaneous bone formation model, as demonstrated by micro-computed tomographic, histological, and immunohistochemical analyses. This MV-alginate-PCL construct may offer a novel, proangiogenic, and cost-effective option for bone tissue engineering.

Porous shape memory scaffold of dextran and hydroxyapatite for minimum invasive implantation for bone tissue engineering applications

2020 ◽  
pp. 088532822095006
Author(s):  
Kai Huang ◽  
Mo-song Yang ◽  
Yu-jun Tang ◽  
Shi-Yong Ling ◽  
Feng Pan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Minimally Invasive ◽  
Shape Memory ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Porous Scaffold ◽  
Great Promise ◽  
Scanning Calorimetry ◽  
Engineering Applications

Minimally invasive implantation of a porous scaffold of large volume into bone defect site remains a challenge. Scaffolds based on shape memory polymer (SMP) show potential to be delivered in the compact form via minimally invasive surgery. The present study chooses poly (ε-caprolactone)-diols (PCL-diols) as the SMP to cross-link carboxyl dextran via ester bonds together with particle leaching method to yield a porous SMP scaffold. The inner surfaces of porous SMP scaffold are then mineralized via in situ precipitation to yield mineralized porous SMP-hydroxyapatite (SMP-HA) scaffold. The porous SMP-HA scaffold possesses pore size of 400–500 μm, with HA particles uniformly distributed and orientationally aligned on the inner surfaces of scaffold. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) are carried out to identify the HA deposition. The phase transition temperature of the scaffold is adjusted to 38°C via changing the dosage of PCL (molecule weight: 2800) to endow the scaffold with shape deformation and fixed properties, as well as well-performed shape recovery property under body temperature. Bone marrow mesenchymal stem cells (BMSCs) adhere on the inner surfaces of SMP-HA scaffold, exhibiting larger spreading area when compared to cells adhered on SMP scaffold without HA, promoting its osteogenesis. In vivo degradation showed that the scaffold degrades completely after 6 months post-implantation. At the same time, significant tissue and capillary invasion indicated that the present porous SMP-HA scaffold hold great promise towards bone tissue engineering applications.

Towards Engineering Whole Bones via Endochondral Ossification

2013 ◽  
Author(s):  
Eamon J. Sheehy ◽  
Tatiana Vinardell ◽  
Conor T. Buckley ◽  
Daniel J. Kelly
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Low Oxygen ◽  
Engineering Applications ◽  
Endochondral Bone ◽  
Oxygen Conditions

Tissue engineering applications aim to replace or regenerate damaged tissues through a combination of cells, three-dimensional scaffolds, and signaling molecules [1]. The endochondral approach to bone tissue engineering [2], which involves remodeling of an intermittent hypertrophic cartilaginous template, may be superior to the traditional intramembranous approach. Naturally derived hydrogels have been used extensively in tissue engineering applications [3]. Mesenchymal stem cell (MSC) seeded hydrogels may be a particularly powerful tool in scaling-up engineered endochondral bone grafts as the low oxygen conditions that develop within large constructs enhance in vitro chondrogenic differentiation and functional development [4]. A key requirement however, is that the hydrogel must allow for remodeling of the engineered hypertrophic cartilage into bone and also facilitate vascularization of the graft. The first objective of this study was to compare the capacity of different naturally derived hydrogels (alginate, chitosan, and fibrin) to generate in vivo endochondral bone. The secondary objective was to investigate the possibility of engineering a ‘scaled-up’ anatomically accurate distal phalange as a paradigm for whole bone tissue engineering.

scholarly journals In Vitro and In Vivo Evaluation of Carboxymethyl Cellulose Scaffolds for Bone Tissue Engineering Applications

ACS Omega ◽  
2021 ◽  
Author(s):  
Ganesan Priya ◽  
Balaraman Madhan ◽  
Uttamchand Narendrakumar ◽  
Rayadurgam Venkata Suresh Kumar ◽  
Inderchand Manjubala
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Carboxymethyl Cellulose ◽  
Engineering Applications ◽  
In Vivo Evaluation
Sign in / Sign up

Export Citation Format

Share Document