scholarly journals Effect of an Atmospheric Pressure Plasma Jet on the Structure and Physicochemical Properties of Waxy and Normal Maize Starch

Polymers ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 8 ◽  
Author(s):  
Yaping Zhou ◽  
Yizhe Yan ◽  
Miaomiao Shi ◽  
Yanqi Liu

In present study, a novel physical modification of waxy maize starch (WMS) and normal maize starch (NMS) was investigated by using an atmospheric pressure plasma jet (APPJ) treatment. The effect on the structure and physicochemical properties of both starches was demonstrated by treatment with a 5% starch suspension (w/w) with APPJ for short periods of time (1, 3, 5, or 7 min). The pH of WMS and NMS was decreased after APPJ treatment from 5.42 to 4.94, and 5.09 to 4.75, respectively. The water-binding capacity (WBC) (WMS: 105.19%–131.27%, NMS: 83.56%–95.61%) and swelling volume (SV) (WMS: 2.96 g/mL–3.33 g/mL, NMS: 2.75 g/mL–3.05 g/mL) of the starches were obviously increased by APPJ treatment. The surfaces of starch granules were wrecked, due to plasma etching. No changes in the crystalline types of both starches were observed. However, the relative crystallinities (RCs) of WMS and NMS were reduced from 46.7% to 42.0%, and 40.1% to 35.7%, respectively. Moreover, the short-range molecular orders of both starches were slightly reduced. In addition, APPJ treatment resulted in lower gelatinization temperature and enthalpies. Therefore, APPJ provides a mild and green approach to starch modification, showing great potential for applications in the food and non-food industry.

2019 ◽  
Vol 283 ◽  
pp. 46-51 ◽  
Author(s):  
Tsung-Yen Wu ◽  
Chih-Ren Chang ◽  
Tsai-Ju Chang ◽  
Yu-Ju Chang ◽  
Ying Liew ◽  
...  

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 683
Author(s):  
Huiliang Jin ◽  
Caixue Tang ◽  
Haibo Li ◽  
Yuanhang Zhang ◽  
Yaguo Li

The continuous phase plate (CPP) is the vital diffractive optical element involved in laser beam shaping and smoothing in high-power laser systems. The high gradients, small spatial periods, and complex features make it difficult to achieve high accuracy when manufacturing such systems. A high-accuracy and high-efficiency surface topography manufacturing method for CPP is presented in this paper. The atmospheric pressure plasma jet (APPJ) system is presented and the removal characteristics are studied to obtain the optimal processing parameters. An optimized iterative algorithm based on the dwell point matrix and a fast Fourier transform (FFT) is proposed to improve the accuracy and efficiency in the dwell time calculation process. A 120 mm × 120 mm CPP surface topography with a 1326.2 nm peak-to-valley (PV) value is fabricated with four iteration steps after approximately 1.6 h of plasma processing. The residual figure error between the prescribed surface topography and plasma-processed surface topography is 28.08 nm root mean square (RMS). The far-field distribution characteristic of the plasma-fabricated surface is analyzed, for which the energy radius deviation is 11 μm at 90% encircled energy. The experimental results demonstrates the potential of the APPJ approach for the manufacturing of complex surface topographies.


2019 ◽  
Vol 675 ◽  
pp. 34-42 ◽  
Author(s):  
Md. Mokter Hossain ◽  
Quang Hung Trinh ◽  
Duc Ba Nguyen ◽  
M.S.P. Sudhakaran ◽  
Young Sun Mok

Sign in / Sign up

Export Citation Format

Share Document