scholarly journals Improved Automated Detection of Subpixel-Scale Inundation—Revised Dynamic Surface Water Extent (DSWE) Partial Surface Water Tests

2019 ◽  
Vol 11 (4) ◽  
pp. 374 ◽  
Author(s):  
John Jones
Keyword(s):  
Surface Water ◽  
Mixture Models ◽  
Model Development ◽  
Depth Estimation ◽  
High Temporal Resolution ◽  
Commission Error ◽  
Dynamic Surface ◽  
In Situ Data ◽  
The Us ◽  
Spectral Mixture

In order to produce useful hydrologic and aquatic habitat data from the Landsat system, the U.S. Geological Survey has developed the “Dynamic Surface Water Extent” (DSWE) Landsat Science Product. DSWE will provide long-term, high-temporal resolution data on variations in inundation extent. The model used to generate DSWE is composed of five decision-rule based tests that do not require scene-based training. To allow its general application, required inputs are limited to the Landsat at-surface reflectance product and a digital elevation model. Unlike other Landsat-based water products, DSWE includes pixels that are only partially covered by water to increase inundation dynamics information content. Previously published DSWE model development included one wetland-focused test developed through visual inspection of field-collected Everglades spectra. A comparison of that test’s output against Everglades Depth Estimation Network (EDEN) in situ data confirmed the expectation that omission errors were a prime source of inaccuracy in vegetated environments. Further evaluation exposed a tendency toward commission error in coniferous forests. Improvements to the subpixel level “partial surface water” (PSW) component of DSWE was the focus of this research. Spectral mixture models were created from a variety of laboratory and image-derived endmembers. Based on the mixture modeling, a more “aggressive” PSW rule improved accuracy in herbaceous wetlands and reduced errors of commission elsewhere, while a second “conservative” test provides an alternative when commission errors must be minimized. Replication of the EDEN-based experiments using the revised PSW tests yielded a statistically significant increase in mean overall agreement (4%, p = 0.01, n = 50) and a statistically significant decrease (11%, p = 0.009, n = 50) in mean errors of omission. Because the developed spectral mixture models included image-derived vegetation endmembers and laboratory spectra for soil groups found across the US, simulations suggest where the revised DSWE PSW tests perform as they do in the Everglades and where they may prove problematic. Visual comparison of DSWE outputs with an unusual variety of coincidently collected images for locations spread throughout the US support conclusions drawn from Everglades quantitative analyses and highlight DSWE PSW component strengths and weaknesses.

scholarly journals Monitoring monthly surface water dynamics of Dongting Lake using Sentinal-1 data at 10 m

PeerJ ◽  
2018 ◽  
Vol 6 ◽  
pp. e4992 ◽  
Author(s):  
Liwei Xing ◽  
Xinming Tang ◽  
Huabin Wang ◽  
Wenfeng Fan ◽  
Guanghui Wang
Keyword(s):  
Surface Water ◽  
Water Distribution ◽  
Remote Sensing Data ◽  
Water Area ◽  
Dongting Lake ◽  
Water Dynamics ◽  
High Temporal Resolution ◽  
Backscattering Coefficient ◽  
Distribution Maps ◽  
Lower Accuracy

High temporal resolution water distribution maps are essential for surface water monitoring because surface water exhibits significant inner-annual variation. Therefore, high-frequency remote sensing data are needed for surface water mapping. Dongting Lake, the second-largest freshwater lake in China, is famous for the seasonal fluctuations of its inundation extents in the middle reaches of the Yangtze River. It is also greatly affected by the Three Gorges Project. In this study, we used Sentinel-1 data to generate surface water maps of Dongting Lake at 10 m resolution. First, we generated the Sentinal-1 time series backscattering coefficient for VH and VV polarizations at 10 m resolution by using a monthly composition method. Second, we generated the thresholds for mapping surface water at 10 m resolution with monthly frequencies using Sentinel-1 data. Then, we derived the monthly surface water distribution product of Dongting Lake in 2016, and finally, we analyzed the inner-annual surface water dynamics. The results showed that: (1) The thresholds were −21.56 and −15.82 dB for the backscattering coefficients for VH and VV, respectively, and the overall accuracy and Kappa coefficients were above 95.50% and 0.90, respectively, for the VH backscattering coefficient, and above 94.50% and 0.88, respectively, for the VV backscattering coefficient. The VV backscattering coefficient achieved lower accuracy due to the effect of the wind causing roughness on the surface of the water. (2) The maximum and minimum areas of surface water were 2040.33 km2in July, and 738.89 km2in December. The surface water area of Dongting Lake varied most significantly in April and August. The permanent water acreage in 2016 was 556.35 km2, accounting for 19.65% of the total area of Dongting Lake, and the acreage of seasonal water was 1525.21 km2. This study proposed a method to automatically generate monthly surface water at 10 m resolution, which may contribute to monitoring surface water in a timely manner.

scholarly journals Accurate extraction of surface water in complex environment based on Google Earth Engine and Sentinel-2

PLoS ONE ◽  
2021 ◽  
Vol 16 (6) ◽  
pp. e0253209
Author(s):  
Jianfeng Li ◽  
Biao Peng ◽  
Yulu Wei ◽  
Huping Ye
Keyword(s):  
Surface Water ◽  
Google Earth ◽  
Water Extraction ◽  
Practical Significance ◽  
Commission Error ◽  
Complex Environment ◽  
Visual Interpretation ◽  
Water Index ◽  
Google Earth Engine ◽  
Sentinel 2

To realize the accurate extraction of surface water in complex environment, this study takes Sri Lanka as the study area owing to the complex geography and various types of water bodies. Based on Google Earth engine and Sentinel-2 images, an automatic water extraction model in complex environment(AWECE) was developed. The accuracy of water extraction by AWECE, NDWI, MNDWI and the revised version of multi-spectral water index (MuWI-R) models was evaluated from visual interpretation and quantitative analysis. The results show that the AWECE model could significantly improve the accuracy of water extraction in complex environment, with an overall accuracy of 97.16%, and an extremely low omission error (0.74%) and commission error (2.35%). The AEWCE model could effectively avoid the influence of cloud shadow, mountain shadow and paddy soil on water extraction accuracy. The model can be widely applied in cloudy, mountainous and other areas with complex environments, which has important practical significance for water resources investigation, monitoring and protection.

scholarly journals Surface waters properties in the Laptev and the East-Siberian Seas in summer 2018 from in situ and satellite data

2019 ◽  
Author(s):  
Anastasiia Tarasenko ◽  
Alexandre Supply ◽  
Nikita Kusse-Tiuz ◽  
Vladimir Ivanov ◽  
Mikhail Makhotin ◽  
...  
Keyword(s):  
Surface Water ◽  
Satellite Data ◽  
Water Masses ◽  
Sea Surface ◽  
Ekman Transport ◽  
Water Displacement ◽  
Wind Speeds ◽  
In Situ Data ◽  
Ocean Salinity

Abstract. Variability of surface water masses of the Laptev and the East-Siberian seas in August–September 2018 is studied using in situ and satellite data. In situ data was collected during ARKTIKA-2018 expedition and then completed with satellite estimates of sea surface temperature (SST) and salinity (SSS), sea surface height, satellite-derived wind speeds and sea ice concentrations. Derivation of SSS is still challenging in high latitude regions, and the quality of Soil Moisture and Ocean Salinity (SMOS) SSS retrieval was improved by applying a threshold on SSS weekly error. The validity of SST and SSS products is demonstrated using ARKTIKA-2018 continuous thermosalinograph measurements and CTD casts. The surface gradients and mixing of river and sea waters in the free of ice and ice covered areas is described with a special attention to the marginal ice zone. The Ekman transport was calculated to better understand the pathway of surface water displacement. T-S diagram using surface satellite estimates shows a possibility to investigate the surface water masses transformation in detail.

scholarly journals Kalman filter physical retrieval of surface emissivity and temperature from geostationary infrared radiances

2013 ◽  
Vol 6 (12) ◽  
pp. 3613-3634 ◽  
Author(s):  
G. Masiello ◽  
C. Serio ◽  
I. De Feis ◽  
M. Amoroso ◽  
S. Venafra ◽  
...  
Keyword(s):  
Kalman Filter ◽  
High Temporal Resolution ◽  
Target Area ◽  
Surface Emissivity ◽  
In Situ Data ◽  
Infrared Imager ◽  
Filter Approach ◽  
Infrared Radiances

Abstract. The high temporal resolution of data acquisition by geostationary satellites and their capability to resolve the diurnal cycle allows for the retrieval of a valuable source of information about geophysical parameters. In this paper, we implement a Kalman filter approach to apply temporal constraints on the retrieval of surface emissivity and temperature from radiance measurements made from geostationary platforms. Although we consider a case study in which we apply a strictly temporal constraint alone, the methodology will be presented in its general four-dimensional, i.e., space-time, setting. The case study we consider is the retrieval of emissivity and surface temperature from SEVIRI (Spinning Enhanced Visible and Infrared Imager) observations over a target area encompassing the Iberian Peninsula and northwestern Africa. The retrievals are then compared with in situ data and other similar satellite products. Our findings show that the Kalman filter strategy can simultaneously retrieve surface emissivity and temperature with an accuracy of ± 0.005 and ± 0.2 K, respectively.

Sign in / Sign up

Export Citation Format

Share Document