Challenges for In-Flight Calibration of Thermal Infrared Instruments for Earth Observation

Satellite instruments operating in the thermal infrared wavelength range >3 µm provide information for applications such as land surface temperature (LST), sea surface temperatures (SST), land surface emissivity, land classification, soil composition, volcanology, fire radiative power, cloud masking, aerosols, and trace gases. All these instruments are dependent on blackbody (BB) calibration sources to provide the traceability of the radiometric calibration to SI (Système International d’Unités). A key issue for flight BB sources is to maintain the traceability of the radiometric calibration from ground to orbit. For example, the temperature of the BB is measured by a number of precision thermometers that are calibrated against a reference Standard Platinum Resistance Thermometer (SPRT) to provide the traceability to the International Temperature Scale of 1990 (ITS-90). However, once calibrated the thermometer system is subject to drifts caused by on-ground testing, the launch and space environments. At best the uncertainties due to thermometer ageing can only be estimated as there is no direct method for recalibrating. Comparisons with other satellite sensors are useful for placing an upper limit on calibration drifts but do not themselves provide a traceable link to the SI. In this paper, we describe we describe some of the technology developments, including phase change cells for use as reference standards, thermometer readout electronics and implementation of novel coatings, that are in progress to enhance the traceability of flight calibration systems in the thermal infrared.