scholarly journals Human Hand Anatomy-Based Prosthetic Hand

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 137
Author(s):  
Larisa Dunai ◽  
Martin Novak ◽  
Carmen García Espert
Keyword(s):  
3D Printing ◽  
Degrees Of Freedom ◽  
Use Of Force ◽  
Hand Movements ◽  
Human Hand ◽  
Prosthetic Hand ◽  
Object Surface ◽  
Hand Phalanges ◽  
High Level

The present paper describes the development of a prosthetic hand based on human hand anatomy. The hand phalanges are printed with 3D printing with Polylactic Acid material. One of the main contributions is the investigation on the prosthetic hand joins; the proposed design enables one to create personalized joins that provide the prosthetic hand a high level of movement by increasing the degrees of freedom of the fingers. Moreover, the driven wire tendons show a progressive grasping movement, being the friction of the tendons with the phalanges very low. Another important point is the use of force sensitive resistors (FSR) for simulating the hand touch pressure. These are used for the grasping stop simulating touch pressure of the fingers. Surface Electromyogram (EMG) sensors allow the user to control the prosthetic hand-grasping start. Their use may provide the prosthetic hand the possibility of the classification of the hand movements. The practical results included in the paper prove the importance of the soft joins for the object manipulation and to get adapted to the object surface. Finally, the force sensitive sensors allow the prosthesis to actuate more naturally by adding conditions and classifications to the Electromyogram sensor.

scholarly journals Human Hand Anatomy Based Prosthetic Hand

2020 ◽  
Author(s):  
Larisa Dunai ◽  
Martin Novak ◽  
Carmen García Espert
Keyword(s):  
Degrees Of Freedom ◽  
Use Of Force ◽  
Hand Movements ◽  
Human Hand ◽  
Prosthetic Hand ◽  
Object Surface ◽  
Hand Phalanges ◽  
3D Printed ◽  
High Level

The present paper describes the development of a prosthetic hand based on the human hand anatomy. The hand phalanges are printed by using 3D printed with Polylactic Acid material. One of the main contributions is the investigation on the prosthetic hand joins; the proposed design enables to create personalized joins that allow the prosthetic hand a high level of movement by increasing the degrees of freedom of the fingers. Moreover, the driven wire tendons show a progressive grasping movement, being the friction of the tendons with the phalanges very low. Another important point is the use of force sensitive resistors for simulating the hand touch pressure. These are used for the grasping stop simulating touch pressure of the fingers. Surface Electromyogram (EMG) sensors allow the user to control the prosthetic hand grasping start. Their use may provide the prosthetic hand the possibility of classification of the hand movements. The practical results included in the paper prove the importance of the soft joins for the object manipulation and to get adapted to the object surface. Finally, the force sensitive sensors allow the prosthesis to actuate with more naturalness by adding conditions and classifications to the Electromyogram sensor.

Novel Design of a 3D Printed Anthropomorphic Soft Prosthetic Hand

2020 ◽  
Author(s):  
Esme Abbot ◽  
Amanda de Oliveira Barros ◽  
James Yang
Keyword(s):  
Degrees Of Freedom ◽  
Fused Deposition Modeling ◽  
Human Hand ◽  
Prosthetic Hand ◽  
Fused Deposition ◽  
Versatile Tool ◽  
3D Printed ◽  
External Covering ◽  
Almost All ◽  
Precision Grasping

Abstract Human hands play a key role in almost all activities of daily living (ADLs) because it is an incredibly versatile tool capable of complex motion. For individuals who have had a complete loss of the hand, the ability to perform ADLs is impaired. Effective prosthetics accurately simulate the movements of a human hand by providing a high number of degrees of freedom, an efficient control system, and an anthropomorphic appearance. In this paper, the design and construction process of a highly anthropomorphic soft robotic prosthetic hand is outlined. The design specifications of the hand are based on feedback from current and former prosthetic users. The hand endoskeleton was 3D printed using fused deposition modeling techniques and was enclosed in a silicone coating modeled, after a real human hand. The hand presents anthropomorphic design in its realistic bone shapes and in its external covering that is like skin in texture and mechanical properties. The hand utilizes the flexibility of silicone instead of antagonistic tendons which would otherwise add complexity and weight to the prosthetic design. The prototype also includes adduction/abduction of the fingers, which is a common omitted movement in other prosthetics. Testing showed that the hand is capable of effective power and precision grasping.

scholarly journals Development of an Anthropomorphic Prosthetic Hand with Underactuated Mechanism

2020 ◽  
Vol 10 (12) ◽  
pp. 4384
Author(s):  
Wooseok Ryu ◽  
Youngjin Choi ◽  
Yong Je Choi ◽  
Yeong Geol Lee ◽  
Sungon Lee
Keyword(s):  
Degrees Of Freedom ◽  
Power Transmission ◽  
Human Hand ◽  
Prosthetic Hand ◽  
Underactuated Mechanism ◽  
Hand Size ◽  
Distal Interphalangeal ◽  
Compact Design ◽  
Constant Velocity Joints ◽  
Self Adaptive

An anthropomorphic prosthetic hand for wrist or forearm amputees is developed herein. The prosthetic hand was designed with an underactuated mechanism, which makes self-adaptive grasping possible, as well as natural motions such as flexion and extension. The finger and thumb modules were designed with four degrees of freedom by motions of the distal interphalangeal, proximal interphalangeal, and metacarpophalangeal joints. In this research, we pursued several novel trials in prosthetic hand design. By using two four-bar linkages composed of a combination of linkages and gears for coupling joints at each finger, it was possible to make a compact design, and the linkage has advantages such as accurate positioning, uniform power transmission, and high payload. Also, by using constant-velocity joints, torque is transferred to finger modules regardless of adduction/abduction motions. In addition, adduction/abduction and self-adaptive grasping motions are passively realized using torsional springs. The developed prosthetic hand was fabricated with a weight of 475 g and a human hand size of 175 mm. Experiments with diverse objects showed its good functionality.

Identify Finger Rotation Angles with ArUco Markers and Action Cameras

2022 ◽  
pp. 1-25
Author(s):  
Tianyun Yuan ◽  
Yu Song ◽  
Gerald A. Kraan ◽  
Richard HM Goossens
Keyword(s):  
Coordinate System ◽  
Degrees Of Freedom ◽  
Tracking System ◽  
Hand Movements ◽  
Hand Tracking ◽  
Human Hand ◽  
Joint Rotation ◽  
Hand Joints ◽  
Camera Coordinate System ◽  
Joint Experiment

Abstract Measuring the motions of human hand joints is often a challenge due to the high number of degrees of freedom. In this study, we proposed a hand tracking system utilizing action cameras and ArUco markers to continuously measure the rotation angles of hand joints. Three methods were developed to estimate the joint rotation angles. The pos-based method transforms marker positions to a reference coordinate system (RCS) and extracts a hand skeleton to identify the rotation angles. Similarly, the orient-x-based method calculates the rotation angles from the transformed x-orientations of the detected markers in the RCS. In contrast, the orient-mat-based method first identifies the rotation angles in each camera coordinate system using the detected orientations, and then, synthesizes the results regarding each joint. Experiment results indicated that the repeatability errors with one camera regarding different marker sizes were around 2.64 to 27.56 degrees and 0.60 to 2.36 degrees using the marker positions and orientations respectively. When multiple cameras were employed to measure the joint rotation angles, the angles measured by using the three methods were comparable with that measured by a goniometer. Despite larger deviations occurred when using the pos-based method. Further analysis indicated that the results of using the orient-mat-based method can describe more types of joint rotations, and the effectiveness of this method was verified by capturing hand movements of several participants. Thus it is recommended for measuring joint rotation angles in practical setups.

Analysis and Systematic Classification of Human Hand Movement for Robot Hand Design

2008 ◽  
Vol 20 (3) ◽  
pp. 429-435 ◽  
Author(s):  
Takeshi Ninomiya ◽  
◽  
Takashi Maeno ◽  
Keyword(s):  
Hand Movement ◽  
Hand Movements ◽  
Human Hand ◽  
Robot Hand ◽  
Systematic Classification ◽  
Robot Hands ◽  
Human Muscles ◽  
Set Up ◽  
Human Hands

The systematic classification of hand movements, which indicates the minimum mechanism of robot hands, is suggested. The performance of existent robot hands is not as high as that of human hands because the performance of existent actuators does not come up to that of human muscles in the same volume. It is important for robot hands to accomplish targeted tasks with a minimum mechanism. Human hand movements are analyzed quantitatively considering robot hands such as associated movement of DIP and PIP joints. Based on the results of analysis, we obtain three items, i.e., fingers, joints that must be set up actuators and basic movements we define. We systematically classify human hand movement for the robot hand based on three items.

Excitonic Coupled-cluster Theory: Part I, General Formalism

2017 ◽  
Author(s):  
Yuhong Liu ◽  
Anthony Dutoi
Keyword(s):  
Electron Correlation ◽  
Degrees Of Freedom ◽  
Model Systems ◽  
Coupled Cluster ◽  
Effective Hamiltonian ◽  
Coupled Cluster Theory ◽  
Cluster Theory ◽  
Companion Article ◽  
High Level ◽  
Fragment Interaction

<div> <div>A shortcoming of presently available fragment-based methods is that electron correlation (if included) is described at the level of individual electrons, resulting in many redundant evaluations of the electronic relaxations associated with any given fluctuation. A generalized variant of coupled-cluster (CC) theory is described, wherein the degrees of freedom are fluctuations of fragments between internally correlated states. The effects of intra-fragment correlation on the inter-fragment interaction is pre-computed and permanently folded into the effective Hamiltonian. This article provides a high-level description of the CC variant, establishing some useful notation, and it demonstrates the advantage of the proposed paradigm numerically on model systems. A companion article shows that the electronic Hamiltonian of real systems may always be cast in the form demanded. This framework opens a promising path to build finely tunable systematically improvable methods to capture precise properties of systems interacting with a large number of other systems. </div> </div>

Excitonic Coupled-cluster Theory: Part I, General Formalism

2017 ◽  
Author(s):  
Yuhong Liu ◽  
Anthony Dutoi
Keyword(s):  
Electron Correlation ◽  
Degrees Of Freedom ◽  
Model Systems ◽  
Coupled Cluster ◽  
Effective Hamiltonian ◽  
Coupled Cluster Theory ◽  
Cluster Theory ◽  
Companion Article ◽  
High Level ◽  
Fragment Interaction

<div> <div>A shortcoming of presently available fragment-based methods is that electron correlation (if included) is described at the level of individual electrons, resulting in many redundant evaluations of the electronic relaxations associated with any given fluctuation. A generalized variant of coupled-cluster (CC) theory is described, wherein the degrees of freedom are fluctuations of fragments between internally correlated states. The effects of intra-fragment correlation on the inter-fragment interaction is pre-computed and permanently folded into the effective Hamiltonian. This article provides a high-level description of the CC variant, establishing some useful notation, and it demonstrates the advantage of the proposed paradigm numerically on model systems. A companion article shows that the electronic Hamiltonian of real systems may always be cast in the form demanded. This framework opens a promising path to build finely tunable systematically improvable methods to capture precise properties of systems interacting with a large number of other systems. </div> </div>

Sign in / Sign up

Export Citation Format

Share Document