Force Control Strategy of Five-Digit Precision Grasping With Aligned and Unaligned Configurations

Objective To investigate the digit force control during a five-digit precision grasp in aligned (AG) and unaligned grasping (UG) configurations. Background The effects of various cylindrical handles for tools on power grasp performance have been previously investigated. However, there is little information on force control strategy of precision grasp to fit various grasping configurations. Method Twenty healthy young adults were recruited to perform a lift-hold-lower task. The AG and UG configurations on a cylindrical simulator with force transducers were adjusted for each individual. The applied force and moment, the force variability during holding, and force correlations between thumb and each finger were measured. Result No differences in applied force, force correlation, repeatability, and variability were found between configurations. However, the moments applied in UG were significantly larger than those in AG. Conclusion The force control during precision grasp did not change significantly across AG and UG except for the digit moment. The simulator is controlled efficiently with large moment during UG, which is thus the optimal configuration for precision grasping with a cylindrical handle. Further research should consider the effects of task type and handle design on force control, especially for individuals with hand disorders. Application To design the handle of specific tool, one should consider the appropriate configuration according to the task requirements of precision grasping to reduce the risk of accumulating extra loads on digits with a cylindrical handle.

Dynamics of moving-object grasped by a hybrid hand

When a heavy object is cooperatively grasped to move by several fingers of the robot hybrid hand, the inertial properties and the mass distribution of the object must influence largely on the operation precision, grasping stability, and the safety of both the hybrid hand and the object. Hence, it is an important and significant issue to establish and analyze the dynamics model of the moving-object cooperatively grasped by the hybrid hand in order to ensure the safety and grasping stability of the hybrid hand and the object. However, this research has not been conducted. In this paper, a dynamics model of the moving-object grasped by the hybrid hand is established, and its dynamics is studied and analyzed. First, a three-dimensional model of a hybrid hand formed by a novel parallel manipulator and three fingers is designed for cooperatively grasping object. Second, the kinematic formulas for solving the Jacobian matrices, the Hessian matrices, the general velocity/acceleration of the moving platform, and four active limbs of the parallel manipulator are derived. Third, the composite Jacobian matrix and the composite Hessian matrix of the hybrid hand are derived, and the general velocity/acceleration of the moving-object grasped by the hybrid hand is derived. Fourth, dynamics model of the hybrid hand is established, the formulas for solving the dynamic actuation forces of the three fingers and the dynamic actuation forces/torque and constrained forces of the parallel manipulator are derived. Finally, the theoretical solutions of the dynamics model of the moving-object grasped by the hybrid hand are verified by its simulation mechanism.

Asymmetric shape of distal phalanx of human finger improves precision grasping

In morphology field, the functions of an asymmetric-shaped distal phalanx in human finger have only been inferred. In this study, we used an engineering approach to empirically examine the effects of the shape of distal phalanx on the ability of precision grasping. Hence, we developed artificial fingertips consisting of four parts, namely bones, nails, skin, and subcutaneous tissue, that substitute the actual human fingertips. Furthermore, we proposed a method to evaluate the grasping ability of artificial fingers. When a cylindrical object was grasped by an artificial fingertip, a pull-out experiment was conducted. Thus, the asymmetric type was found to be superior in terms of drawing force, holding time, and work of friction than the symmetric type. Our results clearly demonstrate that the asymmetric shape, particularly the mirror-reversed shape of the distal phalanx, improves the ability of precision grasping and suggests that the human distal phalanx is shaped favorably for object grasping.

Novel Design of a 3D Printed Anthropomorphic Soft Prosthetic Hand

Human hands play a key role in almost all activities of daily living (ADLs) because it is an incredibly versatile tool capable of complex motion. For individuals who have had a complete loss of the hand, the ability to perform ADLs is impaired. Effective prosthetics accurately simulate the movements of a human hand by providing a high number of degrees of freedom, an efficient control system, and an anthropomorphic appearance. In this paper, the design and construction process of a highly anthropomorphic soft robotic prosthetic hand is outlined. The design specifications of the hand are based on feedback from current and former prosthetic users. The hand endoskeleton was 3D printed using fused deposition modeling techniques and was enclosed in a silicone coating modeled, after a real human hand. The hand presents anthropomorphic design in its realistic bone shapes and in its external covering that is like skin in texture and mechanical properties. The hand utilizes the flexibility of silicone instead of antagonistic tendons which would otherwise add complexity and weight to the prosthetic design. The prototype also includes adduction/abduction of the fingers, which is a common omitted movement in other prosthetics. Testing showed that the hand is capable of effective power and precision grasping.

Multi-segment soft robotic fingers enable robust precision grasping

In this work, we discuss the design of soft robotic fingers for robust precision grasping. Through a conceptual analysis of the finger shape and compliance during grasping, we confirm that antipodal grasps are more stable when contact with the object occurs on the side of the fingers (i.e., pinch grasps) instead of the fingertips. In addition, we show that achieving such pinch grasps with soft fingers for a wide variety of objects requires at least two independent bending segments each, but only requires actuation in the proximal segment. Using a physical prototype hand, we evaluate the improvement in pinch-grasping performance of this two-segment proximally actuated finger design compared to more typical, uniformly actuated fingers. Through an exploration of the relative lengths of the two finger segments, we show the tradeoff between power grasping strength and precision grasping capabilities for fingers with passive distal segments. We characterize grasping on the basis of the acquisition region, object sizes, rotational stability, and robustness to external forces. Based on these metrics, we confirm that higher-quality precision grasping is achieved through pinch grasping via fingers with the proximally actuated finger design compared to uniformly actuated fingers. However, power grasping is still best performed with uniformly actuated fingers. Accordingly, soft continuum fingers should be designed to have at least two independently actuated serial segments, since such fingers can maximize grasping performance during both power and precision grasps through controlled adaptation between uniform and proximally actuated finger structures.