scholarly journals Sensor Based on a Poly[2-(Dimethylamino)ethyl Methacrylate-Co-Styrene], Gold Nanoparticles, and Methylene Blue-Modified Glassy Carbon Electrode for Melamine Detection

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2850
Author(s):  
Fairouz Aberkane ◽  
Imene Abdou ◽  
Nadia Zine ◽  
Nicole Jaffrezic-Renault ◽  
Abdelhamid Elaissari ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Gold Nanoparticles ◽  
Impedance Spectroscopy ◽  
Glassy Carbon Electrode ◽  
Modified Electrode ◽  
Glassy Carbon ◽  
Electrochemical Impedance ◽  
Differential Pulse ◽  
Carbon Electrode ◽  
Detection Range

Melamine has been used as a non-protein nitrogenous additive in food products to artificially increase the apparent “false” protein content. Melamine is known as a dangerous and poisonous substance for human health and it causes diverse diseases. An electrochemical sensor for melamine detection has been developed by modification of a glassy carbon electrode using copolymer poly[DMAEMA-co-styrene], gold nanoparticles, and methylene blue. The characterization of the modified electrode was conducted using several analysis techniques including cyclic voltammetry (CV), differential pulse voltammetry (DPV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS). The electrochemical detection of melamine was performed by impedance spectroscopy. Obtained results revealed that the developed sensor has a large detection range from 5.0 × 10−13 to 3.8 × 10−8 M with a low detection limit of 1.8 × 10−12 M (at S/N = 3). Various interfering species such as phenol, hydroquinone, and bisphenol A have been used and their behavior on modified electrode has been studied.

scholarly journals The effect of tamoxifen on the electrochemical behavior of Bi+3/Bi on the glassy carbon electrode and its determination via differential pulse anodic stripping voltammetry

2019 ◽  
Vol 63 (1) ◽  
Author(s):  
Mehdi Jalali ◽  
Zeinab Deris Falahieh ◽  
Mohammad Alimoradi ◽  
Jalal Albadi ◽  
Ali Niazi
Keyword(s):  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Electrochemical Behavior ◽  
Electrochemical Impedance ◽  
Anodic Stripping Voltammetry ◽  
Stripping Voltammetry ◽  
Differential Pulse ◽  
Peak Height ◽  
Carbon Electrode

The electrochemical behavior of Bi+3 ions on the surface of a glassy carbon electrode, in acidic media and in the presence of tamoxifen, was investigated. Cyclic voltammetry, chronoamperometry, differential pulse voltammetry, electrochemical impedance spectroscopy, and scanning electron microscopy with energy-dispersive X-ray spectroscopy were used to find the probable mechanism contributing to the reduction of the peak height of bismuth oxidation with an increase in the concentration of tamoxifen. The obtained results show a slight interaction between the bismuth species and tamoxifen which co-deposit on the surface of glassy carbon electrode. Therefore, the reduction in the peak height of bismuth oxidation as a function of tamoxifen concentration was used to develop a new differential pulse anodic striping voltammetry method for determination of trace amount of tamoxifen. The effects of experimental parameters on the in situ DPASV of Bi+3 ions in the presence of tamoxifen shown the optimal conditions as: 2 mol L-1 H2SO4 (1% v v-1 MeOH), a deposition potential of -0.5 V, a deposition time of 60 s, and a glassy carbon electrode rotation rate of 300 rpm. The calibration curve was plotted in the range of 0.5 to 6 µg mL-1 and the limits of detection and quantitation were calculated to be 3.1 × 10-5 µg mL-1 and 1.0 × 10-4 µg mL-1, respectively. The mean, RSD, and relative bias for 0.5 µg mL-1 (n=5) were found to be 0.49 µg mL-1, 0.3%, and 2%, respectively. Finally, the proposed method was successfully used for the determination of tamoxifen in serum and pharmaceutical samples.

Electrocatalytic Response and Determination of Noradrenaline in the Presence of L-Ascorbic and Uric Acids with Poly(Eriochrome Black T)-Modified Electrode

2007 ◽  
Vol 72 (9) ◽  
pp. 1177-1188 ◽  
Author(s):  
Xinhua Lin ◽  
Wei Li ◽  
Hong Yao ◽  
Yuanyuan Sun ◽  
Liying Huang ◽  
...  
Keyword(s):  
Glassy Carbon Electrode ◽  
Modified Electrode ◽  
Glassy Carbon ◽  
Dynamic Range ◽  
Differential Pulse ◽  
Carbon Electrode ◽  
Modified Glassy Carbon Electrode ◽  
Eriochrome Black T ◽  
Wide Linear Dynamic Range

A poly(Eriochrome Black T) chemically modified glassy carbon electrode modified with Eriochrome Black T was prepared by cyclic voltammetry. The modified electrode showed an excellent electrocatalytic activity in oxidation of noradrenaline (NA) and could separate its electrochemical responses from those of L-ascorbic acid (AA) and uric acid (UA). Differences of the oxidation peak potentials for NA-AA and UA-NA were about 150 mV. The responses to NA, AA and UA of the modified electrode are relatively independent. Using differential pulse voltammetry, the peak currents of NA at modified glassy carbon electrode increased linearly with the concentration of NA from 0.5 to 100 μmol l-1. The detection limit was 0.2 μmol l-1. With the modified electrode, UA could be selectively determined in the presence of AA. The method showing a wide linear dynamic range and excellent sensitivity was successfully applied to the determination of NA in pharmaceutical injections and various samples.

The influence of gold nanoparticles on the electroactivity of nickel tetrasulfonated phthalocyanine

2014 ◽  
Vol 18 (08n09) ◽  
pp. 642-651 ◽  
Author(s):  
Audacity Maringa ◽  
Tebello Nyokong
Keyword(s):  
Gold Nanoparticles ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Glassy Carbon ◽  
Electrochemical Impedance ◽  
Modified Electrodes ◽  
Enhancement Effect ◽  
Carbon Electrode ◽  
Cathodic Peak ◽  
Peak Separation

We report on the electrodeposition of gold nanoparticles ( AuNPs ) on a glassy carbon electrode (GCE) followed by deposition of nickel tetrasulfonated phthalocyanine ( NiTSPc ) film by electropolymerization (poly- NiTSPc -GCE) to form Poly- NiTSPc / AuNPs -GCE. The presence of the gold nanoparticles caused a lowering of the anodic and cathodic peak separation (ΔE p ) of ferricyanide from 126 mV on poly- NiTSPc to 110 mV on poly- NiTSPc / AuNPs . The electrooxidation of nitrite improved on modified electrodes compared to GCE, with the latter giving E p = 0.78 V and the modified electrodes gave E p = 0.62 V or 0.61 V. Poly- NiTSPc / AuNPs -GCE had higher currents compared to poly- NiTSPc -GCE. This indicates the enhancement effect caused by the AuNPs . Electrochemical impedance spectroscopy and chronoamperometric studies also showed that poly- NiTSPc / AuNPs -GCE was a better electrocatalyst than poly- NiTSPc -GCE or AuNPs -GCE.

scholarly journals Preparation and Application of Keggin Silicomolybdic acid Modified Electrode

2020 ◽  
Author(s):  
Miao Liu ◽  
Mingxuan Jia ◽  
Dong Hui Li
Keyword(s):  
Glassy Carbon Electrode ◽  
Modified Electrode ◽  
Glassy Carbon ◽  
Photoelectron Spectroscopy ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Carbon Electrode ◽  
X Ray ◽  
Linear Relationships

Abstract An innovative method for the determination of isoniazid tablets is studied through electrochemical method for the modification of glassy carbon electrode (GCE). Polyoxomolybdate, with stable structures, has not been widely used for the determination of substance. In this study, the mentioned polyoxomolybdate was characterized by Fourier transform infrared spectroscopy (FT-IR), UV-vis, X-ray diffraction (XRD), Atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS), and used to modify the glassy carbon electrode. The electrochemical performance of the polyoxomolybdate@GCE was investigated with cyclic voltammetry (CV) and differential pulse voltammetry (DPV), compared with the unmodified electrode, the proposed polyoxomolybdate modified electrode exhibited strong electro-catalytic activities towards isoniazid (INH). Under the optimized conditions, there was linear relationships between the DPV peak currents and the concentrations in the range of 1 × 10 -7 g/L to 3 × 10 -7 g/L for INH (R 2 = 0.9979), with the limit of detection (LOD) of 0.024 μg/L (based on S/N = 3). The modified electrode has proper reproducibility (RSD < 5%), stability, response time (< 3 min) and lifetime (up to 6 days).

scholarly journals Determination of Mercury (II) Ion on Aryl Amide-Type Podand-Modified Glassy Carbon Electrode

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
Sevgi Güney ◽  
Gülcemal Yıldız ◽  
Gönül Yapar
Keyword(s):  
Glassy Carbon Electrode ◽  
Modified Electrode ◽  
Glassy Carbon ◽  
Reference Electrode ◽  
Differential Pulse ◽  
Acetate Buffer Solution ◽  
Carbon Electrode ◽  
Modified Glassy Carbon Electrode ◽  
Buffer Solution

A new voltammetric sensor based on an aryl amide type podand, 1,8-bis(o-amidophenoxy)-3,6-dioxaoctane, (AAP) modified glassy carbon electrode, was described for the determination of trace level of mercury (II) ion by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). A well-defined anodic peak corresponding to the oxidation of mercury on proposed electrode was obtained at 0.2 V versus Ag/AgCl reference electrode. The effect of experimental parameters on differential voltammetric peak currents was investigated in acetate buffer solution of pH 7.0 containing 1 × 10−1 mol L−1NaCl. Mercury (II) ion was preconcentrated at the modified electrode by forming complex with AAP under proper conditions and then reduced on the surface of the electrode. Interferences of Cu2+, Pb2+, Fe3+, Cd2+, and Zn2+ions were also studied at two different concentration ratios with respect to mercury (II) ions. The modified electrode was applied to the determination of mercury (II) ions in seawater sample.

Sign in / Sign up

Export Citation Format

Share Document