scholarly journals A Driving Behavior Distribution Fitting Method Based on Two-Stage Hybrid User Classification

2021 ◽  
Vol 13 (13) ◽  
pp. 7018
Author(s):  
Han Su ◽  
Qian Zhang ◽  
Wanying Wang ◽  
Xiaoan Tang
Keyword(s):  
Standard Deviation ◽  
Driving Behavior ◽  
Distribution Fitting ◽  
Two Stage ◽  
User Classification ◽  
Driving Time ◽  
Fitting Method ◽  
Stage Classification ◽  
The Mean

Determining the distribution fitting of traditional private vehicle user driving behavior is an effective way to understand the differences between different users and provides valuable information on user travel demands. The classification of users is significant to product improvement, precision marketing, and driving recommendations. This study proposed a method which includes four aspects: (1) data collection; (2) data preprocessing; (3) data analysis—a two-stage hybrid user classification, and (4) distribution fitting method. A two-stage hybrid user classification method is used to cluster traditional vehicle users. First, the first-stage classification of the classification method extracts the daily typical time–mileage-series travel patterns (TMTP) to obtain user driving time characteristics. This first-stage classification also extracts the mean and standard deviation of the daily vehicle mileage traveled (DVMT) to express user driving demands. Next, users are divided by K-means based on the driving time characteristics and driving demands from the first stage. Finally, a three-parameter log-normal distribution is used to fit the DVMT of different user types. Comparison with traditional clustering based on the mean and standard deviation and the proportion of each vehicle’s time series in the TMTP types, this study reveals that the new methods provide significant advantages in analyzing driving behavior and high reference value for enterprises making electric vehicle driving range recommendations, car market segmentation, and policy making decisions.

A novel two-stage method of plant seedlings classification based on deep learning

2021 ◽  
pp. 1-11
Author(s):  
Tianhong Dai ◽  
Shijie Cong ◽  
Jianping Huang ◽  
Yanwen Zhang ◽  
Xinwang Huang ◽  
...  
Keyword(s):  
Deep Learning ◽  
Learning Technology ◽  
Two Stage ◽  
Second Stage ◽  
Stage Classification ◽  
Different Types ◽  
Two Stages ◽  
Plant Seedlings

In agricultural production, weed removal is an important part of crop cultivation, but inevitably, other plants compete with crops for nutrients. Only by identifying and removing weeds can the quality of the harvest be guaranteed. Therefore, the distinction between weeds and crops is particularly important. Recently, deep learning technology has also been applied to the field of botany, and achieved good results. Convolutional neural networks are widely used in deep learning because of their excellent classification effects. The purpose of this article is to find a new method of plant seedling classification. This method includes two stages: image segmentation and image classification. The first stage is to use the improved U-Net to segment the dataset, and the second stage is to use six classification networks to classify the seedlings of the segmented dataset. The dataset used for the experiment contained 12 different types of plants, namely, 3 crops and 9 weeds. The model was evaluated by the multi-class statistical analysis of accuracy, recall, precision, and F1-score. The results show that the two-stage classification method combining the improved U-Net segmentation network and the classification network was more conducive to the classification of plant seedlings, and the classification accuracy reaches 97.7%.

scholarly journals Robust Confidence Intervals for PM2.5 Concentration Measurements in the Ecuadorian Park La Carolina

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 654 ◽  
Author(s):  
Wilmar Hernandez ◽  
Alfredo Mendez ◽  
Rasa Zalakeviciute ◽  
Angela Maria Diaz-Marquez
Keyword(s):  
Air Pollution ◽  
Standard Deviation ◽  
Confidence Intervals ◽  
Quality Index ◽  
Urban Park ◽  
Absolute Deviation ◽  
The Mean ◽  
Concentration Measurements ◽  
Pm2.5 Concentration

In this article, robust confidence intervals for PM2.5 (particles with size less than or equal to 2.5   μ m ) concentration measurements performed in La Carolina Park, Quito, Ecuador, have been built. Different techniques have been applied for the construction of the confidence intervals, and routes around the park and through the middle of it have been used to build the confidence intervals and classify this urban park in accordance with categories established by the Quito air quality index. These intervals have been based on the following estimators: the mean and standard deviation, median and median absolute deviation, median and semi interquartile range, a -trimmed mean and Winsorized standard error of order a , location and scale estimators based on the Andrew’s wave, biweight location and scale estimators, and estimators based on the bootstrap- t method. The results of the classification of the park and its surrounding streets showed that, in terms of air pollution by PM2.5, the park is not at caution levels. The results of the classification of the routes that were followed through the park and its surrounding streets showed that, in terms of air pollution by PM2.5, these routes are at either desirable, acceptable or caution levels. Therefore, this urban park is actually removing or attenuating unwanted PM2.5 concentration measurements.

scholarly journals EXTRACTION OF COASTLINES WITH FUZZY APPROACH USING SENTINEL-1 SAR IMAGE

2016 ◽  
Vol XLI-B7 ◽  
pp. 747-751
Author(s):  
N. Demir ◽  
M. Kaynarca ◽  
S. Oy
Keyword(s):  
Standard Deviation ◽  
Optical Sensors ◽  
Land Surface ◽  
Airborne Lidar ◽  
Surface Model ◽  
Lidar Data ◽  
Sar Image ◽  
Fuzzy Approach ◽  
The Mean

Coastlines are important features for water resources, sea products, energy resources etc. Coastlines are changed dynamically, thus automated methods are necessary for analysing and detecting the changes along the coastlines. In this study, Sentinel-1 C band SAR image has been used to extract the coastline with fuzzy logic approach. The used SAR image has VH polarisation and 10x10m. spatial resolution, covers 57 sqkm area from the south-east of Puerto-Rico. Additionally, radiometric calibration is applied to reduce atmospheric and orbit error, and speckle filter is used to reduce the noise. Then the image is terrain-corrected using SRTM digital surface model. Classification of SAR image is a challenging task since SAR and optical sensors have very different properties. Even between different bands of the SAR sensors, the images look very different. So, the classification of SAR image is difficult with the traditional unsupervised methods. In this study, a fuzzy approach has been applied to distinguish the coastal pixels than the land surface pixels. The standard deviation and the mean, median values are calculated to use as parameters in fuzzy approach. The Mean-standard-deviation (MS) Large membership function is used because the large amounts of land and ocean pixels dominate the SAR image with large mean and standard deviation values. The pixel values are multiplied with 1000 to easify the calculations. The mean is calculated as 23 and the standard deviation is calculated as 12 for the whole image. The multiplier parameters are selected as a: 0.58, b: 0.05 to maximize the land surface membership. The result is evaluated using airborne LIDAR data, only for the areas where LIDAR dataset is available and secondly manually digitized coastline. The laser points which are below 0,5 m are classified as the ocean points. The 3D alpha-shapes algorithm is used to detect the coastline points from LIDAR data. Minimum distances are calculated between the LIDAR points of coastline with the extracted coastline. The statistics of the distances are calculated as following; the mean is 5.82m, standard deviation is 5.83m and the median value is 4.08 m. Secondly, the extracted coastline is also evaluated with manually created lines on SAR image. Both lines are converted to dense points with 1 m interval. Then the closest distances are calculated between the points from extracted coastline and manually created coastline. The mean is 5.23m, standard deviation is 4.52m. and the median value is 4.13m for the calculated distances. The evaluation values are within the accuracy of used SAR data for both quality assessment approaches.

Two-stage classification of respiratory sound patterns

2005 ◽  
Vol 35 (1) ◽  
pp. 67-83 ◽  
Author(s):  
Emin Çaǧatay Güler ◽  
Bülent Sankur ◽  
Yasemin P. Kahya ◽  
Sarunas Raudys
Keyword(s):  
Respiratory Sound ◽  
Two Stage ◽  
Stage Classification ◽  
Sound Patterns

IDSS-based Two stage classification of brain tumor using SVM

2019 ◽  
Vol 10 (1) ◽  
pp. 249-258 ◽  
Author(s):  
Sanjeeva Polepaka ◽  
Ch. Srinivasa Rao ◽  
M. Chandra Mohan
Keyword(s):  
Brain Tumor ◽  
Two Stage ◽  
Stage Classification

scholarly journals EXTRACTION OF COASTLINES WITH FUZZY APPROACH USING SENTINEL-1 SAR IMAGE

2016 ◽  
Vol XLI-B7 ◽  
pp. 747-751 ◽  
Author(s):  
N. Demir ◽  
M. Kaynarca ◽  
S. Oy
Keyword(s):  
Standard Deviation ◽  
Optical Sensors ◽  
Land Surface ◽  
Airborne Lidar ◽  
Surface Model ◽  
Lidar Data ◽  
Sar Image ◽  
Fuzzy Approach ◽  
The Mean

Coastlines are important features for water resources, sea products, energy resources etc. Coastlines are changed dynamically, thus automated methods are necessary for analysing and detecting the changes along the coastlines. In this study, Sentinel-1 C band SAR image has been used to extract the coastline with fuzzy logic approach. The used SAR image has VH polarisation and 10x10m. spatial resolution, covers 57 sqkm area from the south-east of Puerto-Rico. Additionally, radiometric calibration is applied to reduce atmospheric and orbit error, and speckle filter is used to reduce the noise. Then the image is terrain-corrected using SRTM digital surface model. Classification of SAR image is a challenging task since SAR and optical sensors have very different properties. Even between different bands of the SAR sensors, the images look very different. So, the classification of SAR image is difficult with the traditional unsupervised methods. In this study, a fuzzy approach has been applied to distinguish the coastal pixels than the land surface pixels. The standard deviation and the mean, median values are calculated to use as parameters in fuzzy approach. The Mean-standard-deviation (MS) Large membership function is used because the large amounts of land and ocean pixels dominate the SAR image with large mean and standard deviation values. The pixel values are multiplied with 1000 to easify the calculations. The mean is calculated as 23 and the standard deviation is calculated as 12 for the whole image. The multiplier parameters are selected as a: 0.58, b: 0.05 to maximize the land surface membership. The result is evaluated using airborne LIDAR data, only for the areas where LIDAR dataset is available and secondly manually digitized coastline. The laser points which are below 0,5 m are classified as the ocean points. The 3D alpha-shapes algorithm is used to detect the coastline points from LIDAR data. Minimum distances are calculated between the LIDAR points of coastline with the extracted coastline. The statistics of the distances are calculated as following; the mean is 5.82m, standard deviation is 5.83m and the median value is 4.08 m. Secondly, the extracted coastline is also evaluated with manually created lines on SAR image. Both lines are converted to dense points with 1 m interval. Then the closest distances are calculated between the points from extracted coastline and manually created coastline. The mean is 5.23m, standard deviation is 4.52m. and the median value is 4.13m for the calculated distances. The evaluation values are within the accuracy of used SAR data for both quality assessment approaches.

At Least One Standard Deviation Above the Mean

1969 ◽  
Vol 14 (9) ◽  
pp. 470-471
Author(s):  
M. DAVID MERRILL
Keyword(s):  
Standard Deviation ◽  
The Mean
Sign in / Sign up

Export Citation Format

Share Document