Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)

2015 ◽  
2017 ◽  
Vol 38 (4) ◽  
pp. 2209
Author(s):  
Rodrigo Lima Carneiro ◽  
Patrícia Cristina Ferro Lopes ◽  
Ana Paula Gering ◽  
Eliselle Gouveia de Faria Biteli ◽  
Paloma Do Espírito Santo Silva ◽  
...  

This paper evaluated the effects of the ratio of nitrous oxide to oxygen (50% of each) on cardiovascular parameters in pigs anesthetized with propofol and maintained in ventilation with intermittent positive pressure. Sixteen Large White pigs, weighing between 15 and 20 kg, were divided into two groups of eight animals, and designated as follows: GPN (propofol/nitrous oxide) and GPA (propofol/compressed air). In order to allow endotracheal intubation, the animals received azaperone (2 mg kg-1, IM) followed, after 20 minutes, by intravenous propofol. After successful intubation, continuous infusion of propofol was initiated at a dose of 0.4 mg kg-1minute-1. From this point, the GPN group received N2O (diluted in 50% oxygen), while the GPA group received compressed air (diluted in 50% oxygen). Rocuronium was then administered by continuous intravenous infusion at 0.6 mg kg-1h-1. Pressure-controlled ventilation (PCV) was started and adjusted to 15 cmH2O, and the respiratory rate was set to reach capnometry readings between 35-45 mmHg. The measurement of parameters (heart rate, mean arterial pressure, cardiac index, systemic vascular resistance index, stroke index) begun 15 minutes after the administration of rocuronium, and was repeated in 15-minute intervals for 60 minutes. Data were statistically analyzed by ANOVA followed by Bonferroni test. The results showed that the 1:1 ratio combination of nitrous oxide to oxygen (50% each) did not alter the mentioned parameters in pigs anesthetized with propofol and maintained at pressure-controlled ventilation, indicating that it is a safe protocol for the cardiovascular system.


2015 ◽  
Vol 10 (4) ◽  
pp. 620-626
Author(s):  
Takumi Sasaki ◽  
◽  
Yoshiaki Miyazato ◽  
Junji Inamoto ◽  
Takahiro Yamamoto ◽  
...  

We have developed a new type of hose nozzle, which uses either water or compressed air foam (CAF), as a more efficient fire-fighting strategy. In this paper, a description of the measured spray range and foam expansion of both the prototype nozzle and conventional nozzles is given. The results show that the spray range of the prototype nozzle is equal or superior to that of conventional nozzles. The foam expansion capability of the prototype nozzle is far superior to that of existing nozzles. From these results, it was confirmed that the new type of hose nozzle suggested in this paper will be an effective addition to existing firefighting equipment, resulting in a more efficient firefighting strategy.


2017 ◽  
Author(s):  
Craig G Weinschenk ◽  
Daniel M Madrzykowski ◽  
Keith Stakes ◽  
Joseph M Willi
Keyword(s):  

2002 ◽  
Vol 37 (1) ◽  
pp. 21-52 ◽  
Author(s):  
S.A. Magrabi ◽  
B.Z. Dlugogorski ◽  
G.J. Jameson

2020 ◽  
Vol 1006 ◽  
pp. 11-18
Author(s):  
Anatolii Kodrik ◽  
Oleksandr Titenko ◽  
Stanislav Vinogradov ◽  
Stanislav Shakhov

The main problem with creating compressed air systems is to properly regulate the flow of water and the flow of air that is fed into the mixing chamber so as to continuously provide a foam that must have adequate fire-fighting properties and remain stable over time. The process of obtaining compression foam is a thermodynamic process, which depending on the specified technological factors can be both isothermal and adiabatic. The nature of the process determines both the geometric and physical properties of the foam, and its possible fluctuations can lead to changes in the physical characteristics of the foam. The work provides recommendations for determining the type of thermodynamic process, which makes it possible to improve the accuracy when creating mathematical models of mobile plants for the production of CAF.


Sign in / Sign up

Export Citation Format

Share Document