scholarly journals Inverse kinematics Solution of PUMA by using ANFIS Technique

2020 ◽  
Vol 9 (7) ◽  
pp. 847-850
Keyword(s):  
Inverse Kinematics ◽  
Forward Kinematics ◽  
Parameter Method ◽  
Puma Robot

In this paper Inverse kinematics solution of the PUMA 560 is solved. In robotics the main problem is to find the inverse kinematics solution. Forward kinematics is calculated with the help of D-H (Denavit-Hartenberg) parameter method. Now a day’s inverse kinematics is the area of research in robotics. In present paper, Inverse kinematics is calculated by mathematically and by ANFIS and then difference between the predicted value and deducted value is calculated. Workspace area of PUMA Robot is also shown in this paper.

Mechanism Design and Simulation of the ULTRA Spine: A Tensegrity Robot

2015 ◽  
Author(s):  
Andrew P. Sabelhaus ◽  
Hao Ji ◽  
Patrick Hylton ◽  
Yakshu Madaan ◽  
ChanWoo Yang ◽  
...  
Keyword(s):  
Mechanism Design ◽  
Design Process ◽  
Inverse Kinematics ◽  
Gear Ratio ◽  
Forward Kinematics ◽  
Robot Design ◽  
Link Structure ◽  
Iterative Design ◽  
Quadruped Robots ◽  
Ongoing Effort

The Underactuated Lightweight Tensegrity Robotic Assistive Spine (ULTRA Spine) project is an ongoing effort to create a compliant, cable-driven, 3-degree-of-freedom, underactuated tensegrity core for quadruped robots. This work presents simulations and preliminary mechanism designs of that robot. Design goals and the iterative design process for an ULTRA Spine prototype are discussed. Inverse kinematics simulations are used to develop engineering characteristics for the robot, and forward kinematics simulations are used to verify these parameters. Then, multiple novel mechanism designs are presented that address challenges for this structure, in the context of design for prototyping and assembly. These include the spine robot’s multiple-gear-ratio actuators, spine link structure, spine link assembly locks, and the multiple-spring cable compliance system.

Comparison of Inverse Kinematics Algorithms for Multi-Section Continuum Robots

2021 ◽  
Vol 22 (8) ◽  
pp. 420-424
Author(s):  
D. Yu. Kolpashchikov ◽  
O. M. Gerget
Keyword(s):  
Inverse Kinematics ◽  
Complex Geometry ◽  
Forward Kinematics ◽  
Non Destructive Testing ◽  
Invasive Procedures ◽  
Destructive Testing ◽  
Continuum Robots ◽  
Unique Type ◽  
Non Destructive ◽  
Constant Section

Continuum robots are a unique type of robots that move due to the elastic deformation of their own body. Their flexible design allows them to bend at any point along their body, thus making them usable in workspaces with complex geometry and many obstacles. Continuum robots are used in industry for non-destructive testing and in medicine for minimally invasive procedures and examinations. The kinematics of continuum robots consisting of a single bending section are well known, as is the forward kinematics for multi-section continuum robots. There exist efficient algorithms for them. However, the problem of inverse kinematics for multi-section continuum robots is still relevant. The complexity of the inverse kinematics for multi-section continuum robots is quite high due to the nonlinearities of the robots’ motion. The article discusses in detail the modification of the FABRIK algorithm proposed by the authors, as well as a Jacobian-based iterative algorithm. A comparison of inverse kinematics algorithms for multi-section continuum robots with constant section length is given and the results of the experiment are described.

scholarly journals A design of stretcher with auxiliary functions of lateral positioning and transferring for immobilized patients

2021 ◽  
Vol 336 ◽  
pp. 02014
Author(s):  
Ying Xiong ◽  
Xuehua Tang ◽  
Congcong Shi ◽  
Yang Yang
Keyword(s):  
Inverse Kinematics ◽  
Forward Kinematics ◽  
Motion Simulation ◽  
Practical Application ◽  
Auxiliary Functions ◽  
Rigid Rods ◽  
Hospital Bed ◽  
Motion Process ◽  
Lateral Positioning ◽  
Position State

For now, many hospitals that require nurses to move patients by hand from stretchers to a hospital bed, so a design of stretcher with auxiliary functions of lateral positioning and transferring for immobilized patients, which is a mechanical mechanism consisted of rigid rods, joints and sliders, was designed to help the nurses to move patients between beds and reduce their workload. Driven by motors, the rigid rods can be rotated, stretched or shortened so that the entire stretcher bed board can archive to a proper posture and position. In this paper, the following objectives will be achieved: (i) Create a schematic of the mechanism and describe the principles and functions (ii) the calculation of inverse kinematics, forward kinematics, dynamics (including energy), and PD control in the mechanism (iii) The motion process of simulating the mechanism using MATLAB (iv) Using MATLAB to create the plots of angle, torque, and position state (v) Using SolidWorks to construct the prototype and to implement the motion simulation of the mechanism (vi) Describe the practical application and future Extensions of this mechanism.

Robust and efficient forward, differential, and inverse kinematics using dual quaternions

2020 ◽  
pp. 027836492093194
Author(s):  
Neil T Dantam
Keyword(s):  
Inverse Kinematics ◽  
Forward Kinematics ◽  
Robot Kinematics ◽  
Dual Numbers ◽  
Dual Quaternion ◽  
Implicit Representation ◽  
Alternative Representation ◽  
Transformation Matrices ◽  
Dual Quaternions ◽  
Efficient Representation

Modern approaches for robot kinematics employ the product of exponentials formulation, represented using homogeneous transformation matrices. Quaternions over dual numbers are an established alternative representation; however, their use presents certain challenges: the dual quaternion exponential and logarithm contain a zero-angle singularity, and many common operations are less efficient using dual quaternions than with matrices. We present a new derivation of the dual quaternion exponential and logarithm that removes the singularity, we show an implicit representation of dual quaternions offers analytical and empirical efficiency advantages compared with both matrices and explicit dual quaternions, and we derive efficient dual quaternion forms of differential and inverse position kinematics. Analytically, implicit dual quaternions are more compact and require fewer arithmetic instructions for common operations, including chaining and exponentials. Empirically, we demonstrate a 30–40% speedup on forward kinematics and a 300–500% speedup on inverse position kinematics. This work relates dual quaternions with modern exponential coordinates and demonstrates that dual quaternions are a robust and efficient representation for robot kinematics.

Analyses of Error and Precision of 6-DOF Platform

2012 ◽  
Vol 591-593 ◽  
pp. 2081-2086 ◽  
Author(s):  
Rui Ren ◽  
Chang Chun Ye ◽  
Guo Bin Fan
Keyword(s):  
Inverse Kinematics ◽  
Newton Iteration ◽  
Forward Kinematics ◽  
Parallel Mechanisms ◽  
End Effector ◽  
C Programming Language ◽  
C Programming ◽  
Manufacturing Tolerances ◽  
Parallel Robotics ◽  
Forward Kinematic

A particular subset of 6-DOF parallel mechanisms is known as Stewart platforms (or hexapod). Stewart platform characteristic analyzed in this paper is the effect of small errors within its elements (strut lengths, joint placement) which can be caused by manufacturing tolerances or setting up errors or other even unknown sources to end effector. The biggest kinematics problem is parallel robotics which is the forward kinematics. On the basis of forward kinematic of 6-DOF platform, the algorithm model was built by Newton iteration, several computer programs were written in the MATLAB and Visual C++ programming language. The model is effective and real-time approved by forwards kinematics, inverse kinematics iteration and practical experiment. Analyzing the resource of error, get some related spectra map, top plat position and posture error corresponding every error resource respectively. By researching and comparing the error spectra map, some general results is concluded.

Inverse Kinematics of Discretely-Actuated Manipulators Within a Bounded Grid Element

2006 ◽  
Author(s):  
Deanne C. Kemeny ◽  
Raymond J. Cipra
Keyword(s):  
Inverse Kinematics ◽  
Lower Cost ◽  
Robotic Manipulators ◽  
Forward Kinematics ◽  
End Effector ◽  
Grid Element ◽  
The Third ◽  
Inverse Kinematics Problem

Discretely-actuated manipulators are defined in this paper as serial planar chains of many links and are an alternative to traditional robotic manipulators, where continuously variable actuators are replaced with discrete, or digital actuators. Benefits include reduced weight and complexity, and predictable manipulation at lower cost. Challenges to using digital manipulators are the discrete end-effector positions which make the inverse kinematics problem difficult to solve. Furthermore, for a specific application position in the manipulator workspace, there may not be an actual end-effector position. This research has relaxed the inverse kinematics problem around this challenge making each application position an element of a grid in which the end effector must reach. There may be many possible end-effector positions that would reach the element goal, the solution uses the first one that is found. The inverse kinematics solution assumes the assembly configuration of the digital manipulator is already solved specifically for the application grid. The Jacobian function, normally used to solve joint velocities, can be used to identify the exact shift vectors that are used for the inverse kinematics. Three methods to solve this problem are discussed and the third method was implemented as a four-part solution that is a directed and manipulated search for the inverse kinematics solution where all four solutions may be needed. A discussion of forward kinematics and the Jacobian function in relation to digital manipulators is also presented.

Kinematics Simulation Analysis of Turn-Milling Center Based on Virtual Prototype

2010 ◽  
Vol 43 ◽  
pp. 683-686
Author(s):  
Li Da Zhu ◽  
Jia Ying Pei ◽  
Tian Biao Yu ◽  
Wan Shan Wang
Keyword(s):  
Mechanism Design ◽  
Inverse Kinematics ◽  
Development Time ◽  
Simulation Analysis ◽  
Forward Kinematics ◽  
Optimized Design ◽  
Kinematics Simulation ◽  
Physical Prototype ◽  
Motion Characteristics ◽  
Turn Milling

In order to analyze the motion characteristics of turn-milling center, it’s prototype is modeled and spiral motion is simulated and analyzed to get curves of displacement and velocity in forward kinematics and inverse kinematics. The rationality and applicability of mechanism design is verificated to provide the basis of fast optimized design of turn-milling center. So the method can forecast and improve before physical prototype manufacturing to ensure design feasibility and save development time.

Analysis of the Kinematics of an Eight-Wheeled Mobile Platform

2013 ◽  
Vol 198 ◽  
pp. 67-72
Author(s):  
Marek Stania
Keyword(s):  
Inverse Kinematics ◽  
Object Motion ◽  
Forward Kinematics ◽  
Contact Phenomenon ◽  
Kinematics Model ◽  
Inverse Kinematics Problem ◽  
Transport Vehicle ◽  
Forward And Inverse Kinematics ◽  
Motion Parameters ◽  
Simulation Results

This paper presents the modeling problem connected with the autonomous transport vehicle designed at Hochschule Ravensburg-Weingarten. The forward and inverse kinematics problem of eight-wheeled autonomous transport vehicle have been formulated and solved, additionally examples of simulation results representing the changes of individual motion parameters have been presented. Contact phenomenon between foundation and drive wheel has been taken into account in the kinematics model. Motion trajectory and velocity of the selected point belonging to the platform have been intended while the inverse kinematics problem has been solved. The forward kinematics problem has been worked out in order to verify correctness of the studied kinematics model. The presented simulation results point out compatibility of the worked out kinematics model of investigated object. The worked out models allow carrying out analysis of object motion through simulation investigations on the basis of proposed computational model.

Kinematics Analysis of a Hot-Line Live Working Manipulator

2014 ◽  
Vol 610 ◽  
pp. 28-34 ◽  
Author(s):  
Xiao Lin Ma ◽  
Hui Chai ◽  
Yun Jiang Li
Keyword(s):  
Analytical Solutions ◽  
Inverse Kinematics ◽  
Transformation Method ◽  
Forward Kinematics ◽  
Euler Angles ◽  
Kinematics Analysis ◽  
Hydraulic Actuator ◽  
End Effector

This paper introduces the development of hot-line live working manipulators and gives a new configuration manipulator driven by hydraulic actuator firstly. Then, its forward kinematics equations are derived with homogenous transformation method. Finally, the analytical solutions of its inverse kinematics are solved under the condition that the posture of the end-effector is known and given with z-y-z Euler angles.

Kinematics Analysis and Simulation of the Power-on-Live Manipulator

2014 ◽  
Vol 709 ◽  
pp. 316-322
Author(s):  
Xu Dong ◽  
Zhong Cai Zheng ◽  
Yan Gao ◽  
Zhen Ting Jiang ◽  
Hai Yong Xiao
Keyword(s):  
Numerical Simulation ◽  
Dynamic Simulation ◽  
Hydraulic System ◽  
Inverse Kinematics ◽  
Simulation Software ◽  
Forward Kinematics ◽  
Kinematics Analysis ◽  
Six Dof ◽  
Forward And Inverse Kinematics

The Power-On-Live Manipulator with hydraulic system can complete many different repair works in the Substation. This paper focuses on the study of the kinematics of six DOF manipulator, and establishes the forward kinematics equation based on the analysis of the whole power-on-live manipulator. The methods of analytical and geometric are used to complete the power-on-live manipulator’s inverse kinematics calculations, and then the effectiveness of the power-on-live manipulator’s forward and inverse kinematics are verified by the numerical simulation software and the dynamic simulation software.

Sign in / Sign up

Export Citation Format

Share Document