non destructive testing
Recently Published Documents





2022 ◽  
Vol 1 (1) ◽  
pp. 72-77
Evgenii Sniatkov ◽  
Fatma Mirzoeva ◽  
Muslim Tsuev

Modern methods of restoring body parts of a car include many interrelated operations performed in accordance with certain requirements. Carried out repairs are usually con-trolled both by the organization that carried out the repairs and by the car owner. Often after the repair, there is disagreement in the assessment of quality. The article describes the methodology for de-termining the location of damage hidden from observation without using the destructive meth-od. Based on the application of non-destructive testing and analysis of chronology, conclusions are drawn about the cause of the formation of convex deformities of the sweat. Practical value. The article may be useful to specialists working in the field of body repair, as well as experts evaluating the quality of body repair

2022 ◽  
Vol 1049 ◽  
pp. 282-288
S.F. Dmitriev ◽  
Vladimir Malikov ◽  
Alexey Ishkov ◽  
Sergey Voinash ◽  
Marat Kalimullin ◽  

This research is devoted to the application of non-destructive testing methods for detecting defects of the internal structure of the material in steel pipelines. Despite the use of modern approaches to the design and manufacture of pipelines, which make it possible to lay a significant margin of safety in the created system, the task of developing new approaches to measuring the technical and operational characteristics and parameters of steel parts using software and hardware complexes for non-destructive testing does not lose its relevance. The paper presents the results of the development of defect detection system aimed at detecting damage of the structure of the material with a diameter of 0.2 mm and located at a depth of up to 2 mm. The proposed system is based on the physical principles of the influence of the existing defect on the value of the transformer voltage, which is induced in the measurement circuit of the sensor built on eddy current effects. The focus of the research is the relationship between the linear dimensions of the defect, its location and the generated voltage indications of the developed sensor. Also, within the framework of the study, the results of processing and analysis of the data collected by the defect detection system are presented, the result of which was the determination of the parameters of the detected defects.

2022 ◽  
Vol 1049 ◽  
pp. 275-281
Vladimir Gadalov ◽  
Irina Vornacheva ◽  
Sergey Safonov ◽  
Damir Nuretdinov ◽  
Victoria Alexandrovna Sokolova ◽  

Over a long period of operation, under the influence of corrosion and stresses from the acting forces, metal structures lose their strength. There is a need for their periodic non-destructive testing. The development of new methods is relevant in the field of control of building metal structures, such as bridge structures, structures of building cranes and other mechanical engineering products. The applied methods should be reliable and should not require huge material and labor costs. In this work, informational relationships between acoustic characteristics and parameters of metal microstructure are established. The proposed method can be useful for specialists and experts in the field of monitoring the technical condition of metal products requiring non-destructive testing. The safety of the operated objects depends on the accuracy of the applied criteria, as well as the degree of resource saving due to the full use of the product resource.

2022 ◽  
E. Putilova

Abstract. The development of trunk pipelines network, taking into accont their operation in difficult climatic conditions, leads to the creation and the development of non-destructive testing methods to control the stress-strain state of the pipe itself, as well as welded joints. This work presents the results of studies of the microstructure, as well as the mechanical and magnetic characteristics of the metal cut from different zones of the welded joint of X80 strength class pipe steel.

Sign in / Sign up

Export Citation Format

Share Document