scholarly journals Large scale three-dimensional pit slope stability analysis of the structurally controlled mechanism in Mae Moh coal mine

Author(s):  
Apipat Chaiwan ◽  
Cheowchan Leelasukseree ◽  
Narongsak Mavong
2020 ◽  
Vol 841 ◽  
pp. 155-160
Author(s):  
Pongsakorn Wongchana ◽  
Peerapong Jitsangiam

The open pit mine is excavation soil from the Earth's surface, leading to presence of cut steep slopes with stability-concerned manners. Mae Moh open pit mine has the main component of claystone with ambiguous properties under stress condition changes from mine operations. Therefore, the strength of the claystone must be studied to be used for the slope stability analysis. Shear strength parameters for slope stability analysis were derived from the Triaxial Compression tests. Claystone is a type of sedimentary rock. Therefore, it is necessary to improve the equipment of the triaxial compression strength test to fit with intrinsic soft rock characteristics of the Mae Moh Claystone. Determination of parameters was based on Mohr Coulomb model, because it is the basis for slope stability analysis and can be resulted from the triaxial compression test. In addition, many computer-based programs for slope stability analysis also were relied onthe Mohr Coulomb model, including PLAXIS used in this study. Before the analysis, the model were validated by the function of “Simulation of Lab Test” in PLAXIS. Comparison on triaxial compression test results between the Mohr-Coulomb Model from PLAXIS and triaxial compression tests were made. This article reported the strength characteristics of Mae Moh claystone.


1989 ◽  
Vol 26 (4) ◽  
pp. 679-686 ◽  
Author(s):  
Oldrich Hungr ◽  
F. M. Salgado ◽  
P. M. Byrne

A study comparing a three-dimensional extension of the Bishop simplified method with other limit equilibrium solutions is presented. Very good correspondence is found in cases of rotational and symmetric sliding surfaces, such as ellipsoids. The Bishop method tends to be conservative when applied to nonrotational and asymmetric surfaces because it neglects internal strength. The error is, however, tolerably small for many commonly occurring slide geometries. Indices are proposed to identify cases for which the method should not be used. With its limitations defined, the Bishop simplified method offers a useful algorithm for three-dimensional limit equilibrium analysis. Key words: three-dimensional slope stability analysis.


Sign in / Sign up

Export Citation Format

Share Document