scholarly journals State Estimation based Inverse Dynamic Controller for Hybrid system using Artificial Neural Network

2020 ◽  
Vol 8 (1) ◽  
pp. 10-18
Author(s):  
Xiao Laui ◽  
◽  
Rui-Lain Chua
2017 ◽  
Vol 14 (2) ◽  
pp. 172988141770089 ◽  
Author(s):  
Ali Unluturk ◽  
Omer Aydogdu

In this article, a novel real-time artificial neural network–based adaptable switching dynamic controller is developed and practically implemented. It will be used for real-time control of two-wheeled balance robot which can balance itself upright position on different surfaces. In order to examine the efficiency of the proposed controller, a two-wheeled mobile balance robot is designed and a test platform for experimental setup is made for balance problem on different surfaces. In a developed adaptive controller algorithm which is capable to adapt different surfaces, mean absolute target angle deviation error, mean absolute target displacement deviation error and mean absolute controller output data are employed for surface estimation by using artificial neural network. In a designed two-wheeled mobile balance robot system, robot tilt angle is estimated via Kalman filter from accelerometer and gyroscope sensor signals. Furthermore, a visual robot control interface is developed in C++ software development environment so that robot controller parameters can be changed as desired. In addition, robot balance angle, linear displacement and controller output can be observed online on personal computer. According to the real-time experimental results, the proposed novel type controller gives more effective results than the classic ones.


Author(s):  
Liviu Moldovan ◽  
Horațiu-Ștefan Grif ◽  
Adrian Gligor

<p>This paper presents an inverse dynamic model estimation based on an artificial neural network of a complete new parallel robot manipulator prototype 6- PGK with six degrees of freedom, built at Petru Maior University of Tirgu-Mures. The model estimation of the parallel robot manipulator is performed with a feedforward artificial neural network. In the control engineering domain there are control structures that need the direct or inverse model of the process for ensuring the process control at the imposed performances. Usually, the determination of the direct/inverse mathematical model is a difficult or impossible task to be achieved. In these cases different non-parametric or parametric, off-line or on-line identification methods are used. A solution that may support the on-line parametric methods is represented by the feedforward artificial neural networks. By implementing feedforward artificial neural networks as a nonlinear autoregressive model with exogenous inputs, the authors investigate the possibility of choosing the optimum parameters that characterize the neural network so that it approximates as better as possible the model of the 6-PGK prototype robot. Finally an innovative algorithm is developed for obtaining the optimal configuration parameters set of the feedforward artificial neural network. The proposed algorithm helps in setting the optimal parameters of the neural network that offer high opportunities to provide satisfactory identification of the robot model. Experimental results obtained by a structure derived from the proposed solution demonstrate a good approximation related to the studied system, which is characterized by nonlinearities and high complexity.</p>


Sign in / Sign up

Export Citation Format

Share Document