There are a variety of model ices and test techniques adopted by model test facilities. Most often, the clients would ask: “How well can you predict the full scale performance from your model test results?” Model-scale/full-scale correlation becomes an important litmus test to validate a model test technique and its results. This paper summarizes the model-scale/full-scale correlation performed on model test data generated at the National Research Council - Ocean, Coastal, and River Engineering’s (NRC-OCRE) test facility in St. John’s. This correlation includes ship performance predictions, i.e., resistance, propulsion and maneuvering. Selected works from NRC-OCRE on the USCGC icebreaker Healy, the CCGS icebreaker Terry-Fox, the CCGS R-Class icebreakers Pierre Radisson and Sir John Franklin and the CCGS icebreaker Louis S. St. Laurent were reviewed and summarized. The model tests were conducted at NRC-OCRE’s ice tank with the correct density (CD) EGADS model ice. This correlation is based on the concept that a “correlation friction coefficient” (CFC) can be used to predict full-scale ship icebreaking resistance from model test data. The CFCs have been compared for correlation studies using good-quality full-scale information for the five icebreaker models in the NRC-OCRE’s model test database. The review has shown a good agreement between NRCOCRE’s model test predictions and full-scale measurements.
The resistance and power correlation were performed for five sets of full-scale data. Although there is substantial uncertainty on ice thickness and ice strength within the full scale data sets that contributes to data scattering, the data suggest a conservative estimate can be obtained to address reasonably this uncertainty by increasing the model prediction by 15% that envelopes most data points.
Limited correlation for maneuvering in ice was performed for the USCGC icebreaker Healy. Selected test conditions from the sea trials were duplicated for the maneuvering tests and turning diameters were measured from the arcs of partial circles made in the ice tank. Performance predictions were then compared to the full-scale data previously collected. Despite some discrepancy in ice strength and power level between the model tests and sea trial, the model data agree well with the sea trial data except for three outliers. Otherwise, the maneuvering data show a good correlation between the model test and sea trial results.
Study on the Correction Method of Ice Strength and Thickness Applied to the Sea Trial Condition Based on the Ice Model Test Results
