scholarly journals Glenoid fossa position in skeletal class-II malocclusion due to retrognathic mandible and skeletal class-I malocclusion in Pakistani population

2021 ◽  
Vol 12 (4) ◽  
Author(s):  
Rabia Tabassum ◽  
Nazish Amjad ◽  
Faiza Malik

BACKGROUND & OBJECTIVE: Different dental and skeletal abnormalities interact with each other to cause multiple malocclusions of various areas of the dentofacial region. Association of the mandible and cranial base influence the malocclusions in anteroposterior and vertical dimensions that influences the evaluation of the skeletal components of a particular patient, so the relationship of glenoid fossa to adjacent craniofacial components must be taken into account. This research is conducted for the comparison of glenoid fossa position in subjects presenting with class II skeletal malocclusion due to retrognathic mandible and class I skeletal malocclusion. METHODOLOGY: Standardized lateral cephalograms of 130 patients were selected according to inclusion criteria from the orthodontic department. These radiographs were traced, and different angular and linear measurements were recorded. Then the position of glenoid fossa was compared in subjects of class II malocclusion with retrognathic mandible and class I malocclusion. SPSS version 17 was used for data analysis. Cephalometric measurements were analyzed, and glenoid fossa position was compared in both groups by using student’s t-test. Statistical level of significance using student t test was p< 0.05 RESULTS: Position of glenoid fossa in subjects with class II malocclusion is more distal and posterior as compared to the subjects with class I malocclusion. The effective parameters for the measurements of glenoid fossa are GF-S on FH, GF-Ptm on FH, and GF-FMN with p value 0.0001. CONCLUSION: A distally and posteriorly placed glenoid fossa is an important diagnostic feature of Class II skeletal malocclusion with the retrognathic mandible.  

2017 ◽  
Vol 7 (1) ◽  
pp. 7-10 ◽  
Author(s):  
Anand Acharya ◽  
Bhushan Bhattarai ◽  
Diana George ◽  
Tarakant Bhagat

Introduction: Occlusal traits in orthodontic patients have been studied in different parts of Nepal. However, very few data are available on malocclusion in south-eastern region of Nepal.Objective: To assess the pattern of malocclusion occurring in orthodontic patients in south-eastern region of Nepal, and to estimate the age of presentation of Class II malocclusion among the patients.Materials & Method: Data were collected from 150 pre-treatment study models and lateral cephalograms from two orthodontic specialty clinics in Biratnagar. Angle’s classification system was used to determine dental malocclusion and ANB angle was used to determine skeletal malocclusion. Chi square test was used to test the association between dental and skeleton malocclusions.Result: Angle’s Class I malocclusion was found in 95(63.33%), Class II Div 1 in 41(27.33%), Class II Div 2 in 13(8.66%) and Class III in 1(0.66%). Among all subjects; 119 (79.33%) had skeletal Class I, 24(16%) had skeletal Class II and 7(4.66%) had skeletal Class III. There was significant association between dental and skeletal malocclusions. The average age for reporting Class II Div 1 malocclusion was 16.5 years and Class II Div 2 malocclusion was 19 years.Conclusion: Angle’s Class I is the most common malocclusion followed by Class II and Class III among orthodontic patients in south-eastern Nepal. The subjects lack awareness on age factor for orthodontic treatment. 


2015 ◽  
Vol 20 (5) ◽  
pp. 86-93 ◽  
Author(s):  
Nayanna Nadja e Silva ◽  
Rosa Helena Wanderley Lacerda ◽  
Alexandre Wellos Cunha Silva ◽  
Tania Braga Ramos

Objective: Mandibular Class II malocclusions seem to interfere in upper airways measurements. The aim of this study was to assess the upper airways measurements of patients with skeletal Class II malocclusion in order to investigate the association between these measurements and the position and length of the mandible as well as mandibular growth trend, comparing the Class II group with a Class I one.Methods:A total of 80 lateral cephalograms from 80 individuals aged between 10 and 17 years old were assessed. Forty radiographs of Class I malocclusion individuals were matched by age with forty radiographs of individuals with mandibular Class II malocclusion. McNamara Jr., Ricketts, Downs and Jarabak's measurements were used for cephalometric evaluation. Data were submitted to descriptive and inferential statistical analysis by means of SPSS 20.0 statistical package. Student's t-test, Pearson correlation and intraclass correlation coefficient were used. A 95% confidence interval and 5% significance level were adopted to interpret the results.Results:There were differences between groups. Oropharynx and nasopharynx sizes as well as mandibular position and length were found to be reduced in Class II individuals. There was a statistically significant positive correlation between the size of the oropharynx and Xi-Pm, Co-Gn and SNB measurements. In addition, the size of the nasopharynx was found to be correlated with Xi-Pm, Co-Gn, facial depth, SNB, facial axis and FMA.Conclusion: Individuals with mandibular Class II malocclusion were shown to have upper airways measurements diminished. There was a correlation between mandibular length and position and the size of oropharynx and nasopharynx.


2019 ◽  
Vol 9 (1) ◽  
pp. 15-18
Author(s):  
Bashu Dev Pant ◽  
Anjana Rajbhandari ◽  
Resina Pradhan ◽  
Manju Bajracharya

Introduction: Teeth eruption is important for the development of alveolar process which increases vertical height of the face and third molar is the last tooth to erupt in the oral cavity after birth. The aim of this study was to determine relationship between skeletal malocclusion and dental anomalies in Nepalese population. Materials & Method: A sample of 170 patients with agenesis of at least one third molar was divided into four groups according to the third-molar agenesis pattern. Panoramic radiographs, lateral cephalograph and cast models were used to determine the skeletal malocclusion and associated dental anomalies. The Pearson chi-square test was used for stastical analysis. Result: Among 170 patients more than half of the patients were female with the average age being 18.15 ± 3.64 years. Majority of the patients had Class I skeletal malocclusion followed by Class II and III but on group wise comparison of patients with different skeletal patterns Class I skeletal malocclusion had highest prevalence of dental anomalies followed by Class III and Class II malocclusion. Conclusion: Prevalence of third-molar agenesis was more in skeletal class I malocclusion followed by class II and III but skeletal Class I malocclusions had more dental anomalies followed by class III and class II malocclusion.


2020 ◽  
Vol 54 (3) ◽  
pp. 240-247
Author(s):  
Snigdha Pattanaik

PK, a 12-year-old female patient, was diagnosed with skeletal Class II due to retrognathic mandible, average growth pattern, Angle’s Class II, Division I malocclusion with Class II canine relation, mild upper anterior spacing, upper anterior proclination, uprighted lower anterior, lingually tipped 35, increased overjet and overbite, scissor bite Irt 24, 25, acute nasolabial angle, tongue thrust habit, incompetent lips, and lower lip trap. The nonextraction approach to orthodontic treatment was involved. The skeletal malocclusion was corrected using the twin-block appliance, followed by upper and lower pre-adjusted edgewise appliances (0.022 × 0.028 slot) with the MBT prescription.


2018 ◽  
Vol 7 (4) ◽  
pp. 147-152
Author(s):  
Vivek Bikram Thapa ◽  
Amrita Shrestha ◽  
Prabesh Sherchan ◽  
Prakash Poudel ◽  
Luna Joshi

Background: Mandibular retrusion is the main cause of Skeletal Class II malocclusion characterized by skeletal retrusion of mandible with skeletal or dentoalveolar protrusion of maxillary. Objectives: This study was conducted to evaluate effect of treatment with twin-block appliances on pharyngeal dimensions. Methodology: This study was conducted in in the Department of Orthodontics & Dentofacial Orthopedics in Kathmandu Medical College. Twenty patients of age group 7 to 14 years with skeletal class II malocclusion with mandibular retrusion were selected. Variables evaluated were depth of nasopharynx; height of nasopharynx; depth of oropharynx; depth of hypopharynx; soft palate length; soft palate thickness and soft palate inclination. The lateral cephalograms were obtained for all subjects before the start of treatment and after a follow-up period of approximately three months in treatment. Results: Results showed that depth of nasopharynx increased by 1 mm, height of nasopharynx increased by 0.78 mm, depth of nasopharynx increased by 1.97 mm, depth of hypopharynx increased by 0.79 mm, soft palate length decreased by 4 mm, soft palate thickness increased by 2 mm and soft palate inclination decreased by 7.01 mm. The results for depth of pharynx and soft palate thickness were statistically significant. Conclusion: This study concluded that the use of twin block appliance for class II patients corrects sagittal dimension of oropharynx and hypopharynx. Early intervention for mandibular retrognathism in class II malocclusion helps enlarge the airway dimensions and decrease potential risk of obstructive sleep apnea syndrome for growing patients in the future.


2020 ◽  
Vol 54 (4) ◽  
pp. 321-324
Author(s):  
Chandrika G. Katti ◽  
Archana Mohan ◽  
Abhi A

In orthodontics, various methods of assessing sagittal jaw base relationship are formulated. Earlier, skeletal pattern was analyzed only clinically; however, after the introduction of cephalometrics by Broadbent and Hofrath in 1931, ANB and Beta angles are being used to describe skeletal discrepancies between the maxilla and mandible. YEN angle has also been used as a sagittal dysplasia indicator after its introduction in 2009. The aim of our study is to assess the predictability of ANB, Beta, and YEN angles as anteroposterior dysplasia indicators in skeletal class II malocclusion in Gulbarga population. This study is an attempt to check the variation as well as correlation existing between these 3 parameters, so that a more presumable and least variable parameter can be obtained. Total of 70 lateral cephalograms of skeletal class II patients were selected based on Down’s facial angle and tracing was carried out manually to measure ANB, Beta, and YEN angles. Statistical analysis was carried out to assess the coefficient of variation and the Pearson coefficient. Our study concluded that YEN angle is highly predictable and a homogenously distributed angular parameter used to assess sagittal discrepancy in class II patients compared to ANB and Beta angles.


2021 ◽  
Vol 6 (3) ◽  
pp. 63
Author(s):  
Grazia Fichera ◽  
Vincenzo Ronsivalle ◽  
Simona Santonocito ◽  
Khaled S. Aboulazm ◽  
Gaetano Isola ◽  
...  

The purpose of our work is to evaluate the correlation between skeletal Class II malocclusion and temporomandibular disorders, by assessing potential different frequency scores compared with Class I and Class III skeletal malocclusion, and to evaluate associated etiological and risk factors. Fifty-five subjects were examined, 35 females and 20 males, with a mean age of 18 ± 1.3 years, divided into two groups: those with TMD and those without TMD, and prevalence was evaluated in the two groups of Class II subjects. Symptoms and more frequent signs were also examined in the TMD group. Regarding Group A (subjects with the presence of TMD), we found that 48% have a Class II, 16% have Class I, and 28% have Class III. In the totality of the group A sample, only 8% were male subjects. In Group B (subjects without TMD), we found that 40% were females, with 26.7% in Class I, 10% in Class II, and 3.3% in Class III; the male subjects in this group (60%) were distributed with 33.3% in Class I, 16.7% in Class II, and 10% in Class III. Class II malocclusion is not a causal factor of TMD but may be considered a predisposing factor.


2011 ◽  
Vol 12 (1) ◽  
pp. 14-18 ◽  
Author(s):  
G Anil Kumar ◽  
Amit Maheshwari

ABSTRACT Aim The aims of this study were to evaluate the dental changes brought about by activator and activator headgear combination (ACHG) and to determine whether we can achieve control over the lower incisor proclination which is a side effect of using functional appliances; or not, while treating cases of skeletal class II malocclusions. Methods Lateral cephalograms of 45 skeletal class II division 1 patients were selected for the study. Fifteen of them were successfully treated with an Andresen activator and the other 15 with an activator headgear combination. Fifteen class II subjects who had declined treatment served as the control group. Cephalometric landmarks were marked by one author to avoid interobserver variability. Results The results revealed that both the activator and the activator headgear combination significantly (p < 0.001) affected dental variables measured. The mandibular incisor proclination was effectively controlled in the activator headgear combination group. Conclusion An activator headgear combination would offer itself as a better option compared with activator alone in the treatment of skeletal class II malocclusions especially in cases with proclined mandibular incisors. Clinical significance When one of the treatment goals is to achieve a greater control over mandibular incisor proclination in the treatment of Skeletal Class II malocclusions, employing a combination of activator and headgear may substantially improve clinical outcomes. How to cite this article Lall R, Kumar GA, Maheshwari A Kumar M. A Retrospective Cephalometric Evaluation of Dental Changes with Activator and Activator Headgear Combination in the Treatment of Skeletal Class II Malocclusion. J Contemp Dent Pract 2011;12(1):14-18.


2018 ◽  
Vol 12 (1) ◽  
pp. 605-613 ◽  
Author(s):  
M. Portelli ◽  
A. Militi ◽  
M. Cicciù ◽  
A. Lo Giudice ◽  
G. Cervino ◽  
...  

Background:Class II malocclusion is the most common sagittal skeletal discrepancy, with a prevalent skeletal pattern of mandibular retrusion. The correction of mandibular retrusion with functional removable appliance needs a good patient’s compliance; for this reason, some clinicians prefer to use no compliance apparatus.Objective:Objective of the present therapy note is to demonstrate that the use of no compliance apparatus can provide a good correction of skeletal class II malocclusion.Methods:In the present study, authors report a therapy note referred to a 10 years old patient, woman, affected by Class II, with mandibular retrusion and deep bite, treated in 2013 at the Dep. of Orthodontics of Messina University. An orthodontic treatment has been planned with the aim of stimulating mandibular growth; an Herbst appliance with a cantilever design, bonded on first maxillary and mandibular molars, has been used. After eleven months of functional therapy a bilateral molar class I have been obtained.Results:In the therapy note proposed, authors obtained a resolution of mandibular retrusion, a correction of overjet, overbite and dental crowding in both arches, and a bilateral molar and canine class I has been achieved.Conclusion:Herbst appliance seems to be efficient in the correction of II Class Malocclusion, independently from patient’s cooperation; moreover , early correction of Class II malocclusion with functional appliances produces several clinical advantages.


Sign in / Sign up

Export Citation Format

Share Document