scholarly journals A Retrospective Cephalometric Evaluation of Dental Changes with Activator and Activator Headgear Combination in the Treatment of Skeletal Class II Malocclusion

2011 ◽  
Vol 12 (1) ◽  
pp. 14-18 ◽  
Author(s):  
G Anil Kumar ◽  
Amit Maheshwari

ABSTRACT Aim The aims of this study were to evaluate the dental changes brought about by activator and activator headgear combination (ACHG) and to determine whether we can achieve control over the lower incisor proclination which is a side effect of using functional appliances; or not, while treating cases of skeletal class II malocclusions. Methods Lateral cephalograms of 45 skeletal class II division 1 patients were selected for the study. Fifteen of them were successfully treated with an Andresen activator and the other 15 with an activator headgear combination. Fifteen class II subjects who had declined treatment served as the control group. Cephalometric landmarks were marked by one author to avoid interobserver variability. Results The results revealed that both the activator and the activator headgear combination significantly (p < 0.001) affected dental variables measured. The mandibular incisor proclination was effectively controlled in the activator headgear combination group. Conclusion An activator headgear combination would offer itself as a better option compared with activator alone in the treatment of skeletal class II malocclusions especially in cases with proclined mandibular incisors. Clinical significance When one of the treatment goals is to achieve a greater control over mandibular incisor proclination in the treatment of Skeletal Class II malocclusions, employing a combination of activator and headgear may substantially improve clinical outcomes. How to cite this article Lall R, Kumar GA, Maheshwari A Kumar M. A Retrospective Cephalometric Evaluation of Dental Changes with Activator and Activator Headgear Combination in the Treatment of Skeletal Class II Malocclusion. J Contemp Dent Pract 2011;12(1):14-18.

2018 ◽  
Vol 89 (3) ◽  
pp. 391-403 ◽  
Author(s):  
Sherif A. Elkordy ◽  
Amr M. Abouelezz ◽  
Mona M. S. Fayed ◽  
Mai H. Aboulfotouh ◽  
Yehya A. Mostafa

ABSTRACT Objectives: To evaluate the use of direct miniplate anchorage in conjunction with the Forsus Fatigue Resistant Device (FFRD) in treatment of skeletal Class II malocclusion. Materials and Methods: Forty-eight females with skeletal Class II were randomly allocated to the Forsus plus miniplates (FMP) group (16 patients, age 12.5 ± 0.9 years), Forsus alone (FFRD; 16 patients, age 12.1 ± 0.9 years), or the untreated control group (16 subjects, age 12.1 ± 0.9 years). After leveling and alignment, miniplates were inserted in the mandibular symphysis in the FMP group. The FFRD was inserted directly on the miniplates in the FMP group and onto the mandibular archwires in the FFRD group. The appliances were removed after reaching an edge-to-edge incisor relationship. Results: Data from 46 subjects were analyzed. The effective mandibular length significantly increased in the FMP group only (4.05 ± 0.78). The mandibular incisors showed a significant proclination in the FFRD group (9.17 ± 2.42) and a nonsignificant retroclination in the FMP group (−1.49 ± 4.70). The failure rate of the miniplates was reported to be 13.3%. Conclusions: The use of miniplates with the FFRD was successful in increasing the effective mandibular length in Class II malocclusion subjects in the short term. The miniplate-anchored FFRD eliminated the unfavorable mandibular incisor proclination in contrast to the conventional FFRD.


Author(s):  
Maria Dolores Austro-Martinez ◽  
Ana I. Nicolas-Silvente ◽  
Eugenio Velasco-Ortega ◽  
Alvaro Jimenez-Guerra ◽  
Jose A. Alarcon

One of the goals of functional-appliance devices is to modify the vertical growth pattern, solving several kinds of malocclusion. This study aimed to evaluate Class II malocclusion treatment’s stability with Austro Repositioner, followed by fixed appliances, and assess its capacity to modify vertical dimensions in brachyfacial patients. A test group of 30 patients (16 boys and 14 girls, mean 11.9 years old) with Class II malocclusion due to mandibular retrognathism and brachyfacial pattern treated with Austro Repositioner and fixed appliance were compared to a matched untreated Class II control group of 30 patients (17 boys and 13 girls, mean age 11.7 years old). Lateral cephalograms were taken at T1 (initial records), T2 (end of treatment), and T3 (one year after treatment). Statistical comparisons were performed with a paired-sample t-test and two-sample t-tests. Significant improvements in the skeletal Class II relationship were observed in the treated group. The ANB angle decreased (4.75°), the SNB angle increased (3.92°), and the total mandibular length (Co-Pg) increased (8.18 mm) (p < 0.001). Vertical dimensions were also significantly modified, the FMA angle increased (3.94°), LAFH-distance increased (3.15 mm), and overbite decreased (3.35 mm). These changes remained stable one year after treatment. The Austro Repositioner was adequate for treating the skeletal Class II malocclusion resulting from the mandible retrusion in brachyfacial patients.


2012 ◽  
Vol 06 (02) ◽  
pp. 123-132 ◽  
Author(s):  
Elcin Esenlik ◽  
Fidan Alakus Sabuncuoglu

ABSTRACTObjectives: The aim of this study was to investigate the alveolar and symphysis region properties in hyper-, hypo-, and normodivergent Class II division 1 anomaliesMethods: Pretreatment lateral cephalograms of 111 young adult female patients with skeletal Class II division 1 anomalies were compared to those of 54 Class I normal subjects (control group). Class II cases were divided into hyperdivergent (n = 58), hypodivergent (n = 19), and normodivergent groups (n = 34). The heights and widths of the symphysis and alveolus and the depth of maxillary palate were measured on the lateral cephalogramsResults: Mean symphysis width was wider in the hypodivergent Class II group than in the other groups, while mean symphysis height was similar among all groups. Maxillary palatal depth, upper incisor angle, upper and lower molar alveolar heights, and Id–Id′ width were also similar among groupsConclusion: Symphysis width is the main factor in the differential diagnosis of Class II division 1 anomaly rather than symphysis height and hypodivergent Class II Division 1 anomaly is more suitable for mandibular incisors movements. (Eur J Dent 2012;6:123-132)


2021 ◽  
Author(s):  
Gisela Vasconcelos ◽  
Jo Stenehjem ◽  
Stefan Axelsson ◽  
Ronnaug Saeves

Abstract Background: Prader-Willi syndrome (PWS) is a complex multisystem genetic disorder with distinct genetic and clinical features. Among other clinical symptoms, PWS is characterized by severe infantile hypotonia with feeding problems, childhood onset hyperphagia, obesity, scoliosis, short stature combined with growth hormone deficiency and developmental delay. PWS is associated with facial dysmorphology, orofacial dysfunction, oral abnormalities, low salivary flow and subsequent severe tooth wear. Little is known about the craniofacial growth direction or dental and skeletal relationships in individuals with PWS in different ages. The purpose of this study was to assess the craniofacial and dentoalveolar characteristics and to investigate the craniofacial growth direction separately in children, young adults and adults with PWS, using a cephalometric analysis of lateral cephalograms. Results: Lateral cephalograms of 42 individuals with a confirmed genetic diagnosis of PWS were analysed and divided into three groups according to their age: Children (< 12 years), young adults (12 – 20 years) and adults (> 20 years). Cephalometric variables were compared between PWS patients and healthy age- and sex-matched controls.Significant deviations and distinct craniofacial patterns were found in children, young adults and adults with PWS compared with the control group. Children showed retrognatic mandible with a skeletal class II relationship, posterior growth direction and longer anterior face height. The young adults had smaller cranial base angle, a skeletal class II pattern and a higher anterior lower face than the control group. Adults with PWS had a prognathic mandible, skeletal class III relationship with anterior growth direction, more retroclined lower incisors and proclined upper incisors than the controls. Similar results were found when comparing the three groups with PWS; the adults had a prognathic mandible, skeletal class III pattern and anterior growth direction. Children had a retropositioned mandibula, skeletal class II relationship and posterior growth direction. Conclusion: This study may contribute to a better understanding of the craniofacial growth pattern in children, young adults and adults with PWS and may have a clinical importance when planning dental treatment, such as prosthodontics and/or orthodontics.


2018 ◽  
Vol 7 (4) ◽  
pp. 147-152
Author(s):  
Vivek Bikram Thapa ◽  
Amrita Shrestha ◽  
Prabesh Sherchan ◽  
Prakash Poudel ◽  
Luna Joshi

Background: Mandibular retrusion is the main cause of Skeletal Class II malocclusion characterized by skeletal retrusion of mandible with skeletal or dentoalveolar protrusion of maxillary. Objectives: This study was conducted to evaluate effect of treatment with twin-block appliances on pharyngeal dimensions. Methodology: This study was conducted in in the Department of Orthodontics & Dentofacial Orthopedics in Kathmandu Medical College. Twenty patients of age group 7 to 14 years with skeletal class II malocclusion with mandibular retrusion were selected. Variables evaluated were depth of nasopharynx; height of nasopharynx; depth of oropharynx; depth of hypopharynx; soft palate length; soft palate thickness and soft palate inclination. The lateral cephalograms were obtained for all subjects before the start of treatment and after a follow-up period of approximately three months in treatment. Results: Results showed that depth of nasopharynx increased by 1 mm, height of nasopharynx increased by 0.78 mm, depth of nasopharynx increased by 1.97 mm, depth of hypopharynx increased by 0.79 mm, soft palate length decreased by 4 mm, soft palate thickness increased by 2 mm and soft palate inclination decreased by 7.01 mm. The results for depth of pharynx and soft palate thickness were statistically significant. Conclusion: This study concluded that the use of twin block appliance for class II patients corrects sagittal dimension of oropharynx and hypopharynx. Early intervention for mandibular retrognathism in class II malocclusion helps enlarge the airway dimensions and decrease potential risk of obstructive sleep apnea syndrome for growing patients in the future.


2017 ◽  
Vol 87 (4) ◽  
pp. 505-512 ◽  
Author(s):  
Selin Ozbilek ◽  
Ahmet Yalcin Gungor ◽  
Salih Celik

ABSTRACT Objective: To evaluate the skeletal, dentoalveolar, and soft tissue effects of skeletally anchored Class II elastics and compare them with a matched control group treated by a monobloc appliance for the correction of skeletal Class II malocclusion due to mandibular retrusion. Materials and Methods: Twelve patients (6 girls, 6 boys) were randomly divided into two groups. In the elastics group, six patients (12.9 ± 1.5 years of age; 3 boys, 3 girls) were treated with skeletally anchored Class II elastics. Two miniplates were placed bilaterally at the ramus of the mandible and the other two miniplates were placed at the aperture piriformis area of the maxilla. In the monobloc group (3 boys and 3 girls; mean age, 12.3 ± 1.6 years), patients used the monobloc appliance. The changes observed in each phase of treatment were evaluated using the Wilcoxon matched-pair sign test. Intergroup comparisons at the initial phase of treatment were analyzed by the Mann-Whitney U test. Results: There were statistically significant group differences in Co-Gn, B-VRL, U1-PP, U1-VRL, Ls-VRL, with significant increases in these parameters in the elastics group (P &lt; .05). The mandibular incisors were protruded in the monobloc group (5.45 ± 1.23°), whereas they were retruded in the elastics group (−3.01 ± 1.66°; P &lt; .01). Conclusions: The undesirable dentoalveolar effects of the monobloc appliance were eliminated by using miniplate anchorage. Favorable skeletal outcomes can be achieved by skeletal anchorage therapies which could be an alternative to treat skeletal Class II patients with mandibular deficiency.


2020 ◽  
Vol 54 (4) ◽  
pp. 321-324
Author(s):  
Chandrika G. Katti ◽  
Archana Mohan ◽  
Abhi A

In orthodontics, various methods of assessing sagittal jaw base relationship are formulated. Earlier, skeletal pattern was analyzed only clinically; however, after the introduction of cephalometrics by Broadbent and Hofrath in 1931, ANB and Beta angles are being used to describe skeletal discrepancies between the maxilla and mandible. YEN angle has also been used as a sagittal dysplasia indicator after its introduction in 2009. The aim of our study is to assess the predictability of ANB, Beta, and YEN angles as anteroposterior dysplasia indicators in skeletal class II malocclusion in Gulbarga population. This study is an attempt to check the variation as well as correlation existing between these 3 parameters, so that a more presumable and least variable parameter can be obtained. Total of 70 lateral cephalograms of skeletal class II patients were selected based on Down’s facial angle and tracing was carried out manually to measure ANB, Beta, and YEN angles. Statistical analysis was carried out to assess the coefficient of variation and the Pearson coefficient. Our study concluded that YEN angle is highly predictable and a homogenously distributed angular parameter used to assess sagittal discrepancy in class II patients compared to ANB and Beta angles.


2016 ◽  
Vol 17 (4) ◽  
pp. 286-293
Author(s):  
Ali AM Jouybari ◽  
Valiallah Arash ◽  
Saeid Tavanafar ◽  
Soraya Khafri ◽  
Zahra Dehghan

ABSTRACT Aim To investigate the skeletal, dental, and soft tissue changes in girls with class II division 1 malocclusion after growth spurt peak under the effect of activator appliance. Materials and methods In this clinical trial study, 15 female patients, with skeletal class II and mandibular growth deficiency and at least 5 mm overjet, were randomly selected 6 months after their menarche. The mean of their ages at the beginning was 12.33 ± 0.81 years, and in the end it was 13.73 ± 0.79 years; the mean duration of treatment was 12.2 ± 3.18 months. Lateral, cephalometric radiographs were taken from all the patients before and after the treatment. Data were analyzed with Statistical Package for the Social Sciences (SPSS) 20 using paired t-test. Results On an average, the ANB angle, the angle of the upper incisors with the S-N, facial convexity, and overjet decreased by 2.6° ± 0.9, 5.4° ± 0.8, 3.8° ± 3.4, and 5.6 ± 1.8 mm respectively. The SNB angle, the angle of the lower incisors with the N-B, the labiomental angle, the total length of the mandible, the lower anterior facial height, the lower lip distance, the first molar of the mandible, and the soft tissue pogonion to the vertical line from the S point increased by 2.8° ± 1.8, 3.4° ± 3, 14.7 ± 15, 3.7 ± 2.6, 2.1 ± 1.6, 6.3 ± 2.5, 4.4 ± 2.4, and 6 ± 3.3 mm respectively. All these figures were statistically significant (p = 0.000). Conclusion The functional appliance improved the dental–skeletal relations and the soft tissue profile of patients after growth spurt peak of puberty in a group of Iranian girls, whereas dental changes were more than skeletal ones. Clinical significance Functional appliances can be used for correction of skeletal class II malocclusion 6 months after menarche in girls. How to cite this article Jouybari AAM, Arash V, Tavanafar S, Khafri S, Dehghan Z. The Effects of Functional Appliances on Female Patients with Skeletal Class II Malocclusion 6 Months after Menarche. J Contemp Dent Pract 2016;17(4):286-293.


Sign in / Sign up

Export Citation Format

Share Document